Wilton 63218 79A 10-Inch Jaw Width by 13-Inch Opening Woodworking Vise
- Woodworking vise with a 10 by 4-inch jaw width and a 13-inch maximum opening. Front jaw that pivots 10-degree to allow for clamping irregular shaped parts. Mounting instructions are included. Pivot jaw can be removed for wider clamping requirements rapid acting nut. Weighs 36 pound.
90Degree Right Angle Single-handle Aluminum Rectangular Carbide Woodworking Vise
- Useful for woodworking, engineering and welding. With the thread wound all the way back, the maximum opening of the jaw is 70mm. Single handle, swing jaw, jaw rotation adjustable. Description 90degree right angle single-handle aluminum rectangular carbide woodworking vise features purpose woodworking. Right angle corner vice, cast alloy body, steel thread. Specification material aluminum alloy die-casting plierssurface coating single handle handle jaw rotation can be adjustablespecifications maximum opening of about 70 mm, jaw width of about 900mm, jaw depth of about 35mm package includes 1 x corner tool. Slots in base plate so you can fix the vice to a work bench or machine table. Clever double pivot design allows clamping of equal or different sized workpieces at a right angle.
TEKTON 53986 6-1/2-Inch Woodworking Vise
- Cast iron construction (30,000 psi tensile strength) with powder coated finish. Mounts to face of workbench to hold woodworking and assembly projects. Jaws predrilled for custom jaw pads (not included). Chrome plated steel sliding t-bar handle and steel guide rails. Acme-threaded screw glides smoothly without binding.
Heavy Duty Quick Release Front Vise – Workshop Accessories > Woodworking Vises
- Front jaw moves up to 9/16-inch to act as full-length dog. Allows clamping of irregular-shaped parts. Has 10-inch opening and 4-by-7-inch jaw width backed by a lifetime limited manufacturer’s warranty. Pivot jaw can be removed for wider clamping requirements. Heavy duty quick release front vise, workshop accessories > woodworking vises#0023/28.
Yost 10027 7WW-RA Woodworking Vise
- The vise has two 1/4″- diameter holes and two 3/diameter holes for included mounting hardware. A rubber washer on either side of the handle prevents unwanted sliding when turning, and the balls on each end unscrew to enable replacement of the handle if worn. The yost vises 7ww-ra 7 inch heavy-duty ductile iron woodworkers vise mounts flush workbench 2-1/4 inch thick to provide clamping action for heavy-duty and professional applications. Assembled in the usa, the ductile iron body construction provides strength for extended life. The jaws draw closer together or farther apart by turning the vise handle clockwise or counterclockwise. Solid steel guide rails adjust to counteract wear. The maximum opening guide bar equipped with end stop prevents vise separation. The adjustable-height steel lift dog holds a workpiece in place for sanding or scraping and is supported by pressure clamps. The slightly tapered, also known as toed, jaws create a solid grip and apply pressure evenly across the top and bottom of the vise.
3-Way Centering C-Clamp Woodworking Vise Welding Holder
- 3 way “c” clamp for many aspects of woodworking & carpentry this is a new 3 way “c” clamp great for many aspects of woodworking and carpentry it has a 2 1/2″ (62 mm) capacity and a throat depth of 2 1/2″ (62 mm) it measures approximately 5 1/4″ x 5 3/8″ (133 x 137 mm).
Kaufhof AVW-5383 Clamp-On Woodworking Bench Vise 9 Inch
- 9 inch jaw width light-duty woodworking vise, 8 inch jaw opening, 3 inch depth, high tensile iron jaws with cold rolled steel guide bars, jaws are drilled for attaching wood faces, zinc plated steel main screw & cross pin handle. .
Wilton 63144 78A 4 inch X 7 inch Pivot Jaw Woodworking Vise
- 6-1/2″ jaw width maximum opening 5”. Jonti-craft 2633jc woodworking vise. Heavy duty quick release front vise, workshop accessories > woodworking vises#0031/28. Countersunk holes in jaws for attachment of wood facings. Wilton 63144 78a 4 inch x 7 inch pivot jaw woodworking vise.
Heavy Duty Quick Release Front Vise – Workshop Accessories > Woodworking Vises
- Designed for light-duty home and shop use. Countersunk holes in jaws for attachment of wood facings. Heavy duty quick release front vise, workshop accessories > woodworking vises#0031/28. 6-1/2″ jaw width maximum opening 5”. Quantity 1 overall dimension 6-1/2”l x 8-1/2”w x 3-1/2”hweight 550 lbs.
GHP Adjustable Woodworking Vise Clamp with 5″ MAX Opening – 6-1/2”
- Weight 5. 50 lbs overall dimension 6-1/2”l x 8-1/2”w x 3-1/2”h quantity 1. This vise operates smoothly with acme thread main screw and twin guide-bars of plated steel. Features woodworking vise 6-1/2″ jaw width maximum opening 5” designed for light-duty home and shop use countersunk holes in jaws for attachment of wood facings designed for light-duty home and shop use. The 6 1/2″ jaw width and a 5” maximum opening capacity. Orange baked enamel finish with countersunk holes in jaws for attachment of wood facings.
Bench Mount 9″ Woodworking Vise Woodworker Carpenter Workbench Top Clamp Jaw
- Polished guide rods acme screw sliding bench dog. 9″ woodworking vise unit overall dimension 9-3/4”l x 20”w x 9”h. Quantity 1. Heavy duty cast iron and steel construction for mounting to 2-1/4″ thick workbench top. 9″ jaw 10-1/4″ opening max.
3 3-Way Centering C-Clamp Woodworking Vise Holder Tools
- Three 3 way “c” clamps for many aspects of woodworking & carpentry this is a new set of three 3 way “c” clamps these are great for carpentry they have a 2 1/2″ (62 mm) capacity and a throat depth of 2 1/2″ (62 mm) each measure approximately 5 1/4″ x 5 3/8″ (133 x 137 mm).
Wilton 63144 Heavy-Duty Woodworking Vise
- Vise shown with optional magnetic maple jaw sold separately. Jaw width is 4″ x 7″. Complete with mounting instructions. This woodworker’s vise includes a metal housing which fully encloses the screw, preventing sawdust and dirt from “gumming” the threads. 29 lb. Opening is 0″. Max. Not only does this keep the threads clean, but it also increases the life of the vise’s rapid action release mechanism. Front jaw pivots 12 degrees to allow clamping of irregularly shaped objects and the entire front jaw can be “lifted” up and locked in place to serve as a full length dog.
Pivot Jaw Woodworking Vises – 78a 4×7 pivot jaw woodworking vise
- -Nut type rapid acting. 825-63144 features -front jaw pivots 10º to allow for clamping irregular shaped parts. 30 lb. 06 pounds. -Jaw height 4 in. -Front jaw moves up 9/16” to act as a full length dog. Generic dimensions -jaw width 7 in. Product type -clamps/vises. -Wt. -Pivot jaw can be removed for wider clamping requirements. Dimensions overall product weight -33.
Columbian 33176 176 6-1/2-Inch Jaw Width by 4-1/2-Inch Opening Dog-less Light-Duty Woodworking Vise
- Includes main screw and crosspin handle. 4-1/2-inch maximum opening. 6-1/2-inch jaw width. 5 pounds. High-tensile iron jaws.
Jonti-Craft 2633JC Woodworking Vise by Jonti-Craft
- Jonti-craft 2633jc woodworking vise. Designed for light-duty home and shop use. 6-1/2″ jaw width maximum opening 5”. Heavy duty quick release front vise, workshop accessories > woodworking vises#0031/28. Countersunk holes in jaws for attachment of wood facings.
6-1/2” Woodworking Vise Clamp MAX Opening 5” Adjustable Woodworker Vise
- Designed for light-duty home and shop use. This vise operates smoothly with acme thread main screw and twin guide-bars of plated steel. Orange baked enamel finish with countersunk holes in jaws for attachment of wood facings. The 6 1/2″ jaw width and a 5” maximum opening capacity.
EnPointâ„¢ DIY Precision Drilling Holes Pin Vise Woodworking Hand Drill for Model Resin Jewelry Walnut Amber Beeswax Olive Nut Buddha Beads Ivory Nut Plastic with 10 pcs Twist Drill Bits
- It’s mainly used for the materials of wood, resin, jewelry, walnut, amber, beeswax, olive nut, vajra bodhi, buddha beads, ivory nut, pvc, acrylic and plastic etc. Available for holding small drills, deburrers, wires, files, reamers also use it to hand drill out the extruder on the 3d printer when it was jammed package include 1 x hand drill 10pcs twist drill bits. It feels good in the hand and has a 3-jaw hardened steel keyless chuck, so you don’t have to bother with swapping out collets. The adjustable gripping diameter of this hand drill is 02-34mm (1/64–9/64 inches) holds very fine drills bits much more snug than the collet vises. Works great for precision drilling and tapping, electronic assembling, tool-making, hole punching, jewelry engraving, models and mininatures and hobbies.
Jonti-Craft 2633JC Woodworking Vise
- Jonti-craft woodworking vise. Made in the united states. Fully assembled.
9” Woodworking Vise Clamp MAX Opening 10-1/4” Adjustable Woodworker Vise
- Woodworking vise heavy duty cast iron and steel construction. For mounting to 2-1/4″ thick workbench top weight 3425 lbs (roughly). Polished guide rods acme screw sliding bench dog. Quantity 1 overall dimension 9-3/4”l x 20”w x 9”h. 9″ wide jaws 10-1/4″ opening.
9” Woodworking Vise Clamp MAX Opening 10-1/4” Clamping Wood Working Device
- For mounting to 2-1/4″ thick workbench top. Polished guide rods acme screw sliding bench dog. Woodworking vise 9″ wide jaws10-1/4″ opening. Quantity 1 weight 3425 lbs (roughly) overall dimension 9-3/4”l x 20”w x 9”h. Heavy duty cast iron and steel construction.
Heavy Duty Quick Release Front Vise – Workshop Accessories > Woodworking Vises
- Allows clamping of irregular-shaped parts. Front jaw moves up to 9/16-inch to act as full-length dog. Heavy duty quick release front vise, workshop accessories > woodworking vises#0030/28. Pivot jaw can be removed for wider clamping requirements. Has 10-inch opening and 4-by-7-inch jaw width backed by a lifetime limited manufacturer’s warranty.
Big Horn 19289 – 6 Inch Clamp on Woodworking Bench Vise
- Jaw width 9 inch, base type clamp-on (bottom table clamp mounting). Big horn corporation 19289. Chrome plated spindles. Jaw depth 3 inch. Jaw opening 8 inch, weight 13 lbs.
6-1/2” Woodworking Vise Clamp MAX Opening 5” Clamping Wood Working Device
- Orange baked enamel finish with countersunk holes in jaws for attachment of wood facings. This vise operates smoothly with acme thread main screw and twin guide-bars of plated steel. The 6 1/2″ jaw width and a 5” maximum opening capacity. Designed for light-duty home and shop use. .
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
