Cobra Carbide 32396 Micro Grain Solid Carbide Jobber Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degrees Special Point, 7/32″ Size, 2-3/8″ Length (Pack of 1)
- Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications. The added web strength of the straight flutes and special point configuration easily penetrate work pieces with minimal deflection. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Bassett DS Series Solid Carbide Spade Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Point, 3/32″ Size (Pack of 1)
- Applicable for non-ferrous material, stainless steel and hardened steel. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems.
Bassett DS Series Solid Carbide Spade Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Point, 3/16″ Size (Pack of 1)
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Applicable for non-ferrous material, stainless steel and hardened steel. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications. Round shanks allow use with a wide variety of toolholding systems.
Kodiak Cutting Tools KCT140358 USA Made Solid Carbide Drill Bit, 2 Straight Flute, 1-1/4″ Length of Cut, 2-1/2″ Overall Length, 1/4″ Diameter
- . 1/4 inch diameter solid carbide drill, straight flute 1-1/4″ length of cut 2-1/2″ overall length 2 flute straight flute drill bit, carbide.
Precision Twist D33F Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degree Point Angle, 1/4″
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Standard length. Round shanks allow use with a wide variety of toolholding systems.
Bassett DS Series Solid Carbide Spade Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Point, 1/8″ Size (Pack of 1)
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Applicable for non-ferrous material, stainless steel and hardened steel.
Precision Twist 209 High Speed Steel Taper Shank Drill Bit, Black Oxide Finish, Morse Taper Shank, Spiral Flute, 118 Degree Point Angle, 1″
- High-speed steel (hss), for use on a wide variety of materials. Long length drill bits (also called taper length), have longer flutes and overall lengths than jobber drill bits. Morse taper shank, for a secure and accurate tool-holding system. 118-degree conventional point angles for general drilling applications. Black oxide finish, improves lubricity, resists corrosion, and will not chip or flake off.
Drill America DWD13J-LH-SET Qualtech 13 Piece High-Speed Steel Jobber Length Drill Bit Set in Metal Case, Black Oxide Finish, Round Shank, Left Hand Spiral Flute, 118 Degrees Conventional Point (Pack of 1)
- Round shanks allow use with a wide variety of toolholding systems. 13 piece drill bit set comes in a metal case. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Reverse-flute drill bits run in the opposite (clockwise) direction from regular drill bits when making holes.
5Pcs Industrial Split Point Cobalt UNI Step Spiral Flute Drill Bit Set
- Features cobalt steel bits provide longer life and cut faster than high speed steel two spiral flutes, automatically deburrs as you drill and provides better chip removal tri-flat shank for sure grip 135 degree split point, self centering case included set contains 1/4″ shank 3/16″ to 1/2″ 6 steps (3/16″, 1/4″, 5/16″, 3/8″. 7/16″, 1/2″) 1/8″ to 1/2″ 13 steps (1/8″, 5/32″, 3/16″, 7/32″, 1/4″, 9/32″, 5/16″, 11/32″, 3/8″, 13/32″, 3/8″, 13/32″, 7/16″, 15/32″, 1/2″) 3/8″ shank 1/4″ to 3/4″ 9 steps (1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″) 1/4″ to 1-3/8″ 10 steps (1/4″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1″, 1-1/8″, 1-1/4″, 1-3/8″)v 3/16″ to 7/8″ 12 steps (3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″, 13/16″, 7/8″).
Bassett DM Series Solid Carbide Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 118 Degrees Four-Facet Point, 1/4″ Size, 2-1/2″ Length (Pack of 1)
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications. Applicable for non-ferrous material, cast iron and steel.
5 Pcs 1.5mm Cutting Dia 10mm Depth 2 Flutes Drill Bit End Mill
- Product name end mill cuttermaterial tungsten steel. Flutenumber 2cutting diameter 15mm/ 006″. Total length 38mm/ 15″mill cutter color silver tone. Weight 25gpackage content 5pcsx straight shank end mill cutter. Cutting depth 10mm/ 04″shank diameter 3175mm/ 013″.
Bassett DS Series Solid Carbide Spade Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Point, 3/8″ Size (Pack of 1)
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications. Applicable for non-ferrous material, stainless steel and hardened steel. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Precision Twist R51 High Speed Steel Long Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degree Point Angle, 1″
- Round shanks can be used with a variety of tool-holding systems. Uncoated (bright) finish, economical and useful with a wide range of drilling applications. High-speed steel (hss), for use on a wide variety of materials. 118-degree conventional point angles good for general drilling applications. Long length (also called taper length) drill bits have longer flutes and overall lengths than jobber drill bits.
Precision Twist 209CO Cobalt Steel Taper Shank Drill Bit, Gold Oxide Finish, Morse Taper Shank, Spiral Flute, 135 Degree Point Angle, 23/32″
- 135-degree, notch-point angle is self-centering, reduces walking, good for hard material and reduces pressure on cutting edges. Long length drill bits (also called taper length) have longer flutes and overall lengths than jobber drill bits. High-speed steel (hss) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances. Morse taper shank, for a secure and accurate tool-holding system. Gold oxide to retain cutting fluid and prevent chip to tool welding.
Precision Twist 1813 High Speed Steel Extra Long Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degree Point Angle, 7/16″
- Uncoated (bright), economical and useful with a wide range of drilling applications. 118-degree conventional point angles good for general drilling applications. High-speed steel (hss), for use on a wide variety of materials. Extra-length, for deeper holes. Round shanks can be used with a variety of tool-holding systems.
Bassett DS Series Solid Carbide Spade Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Point, 1/4″ Size (Pack of 1)
- Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Applicable for non-ferrous material, stainless steel and hardened steel. Round shanks allow use with a wide variety of toolholding systems.
INDUSTRIAL 5pc COBALT UNI STEP BITS SPIRAL FLUTE DRILL BIT SET SPLIT POINT SAE
- Brandneiko pro. Typemulti-bit set, country/region of manufacturechina. Mpn10228b.
Precision Twist M40CO Cobalt Steel Short Length Drill Bit, Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degree Point Angle, 9/16″
- Round shanks, for use on a variety of tool-holding systems. Short-length, for better rigidity and increased strength. 135-degree split point angle is self-centering, reduces walking, good for hard material and reduces pressure on cutting edges. High-speed steel (hss) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances. Gold oxide, retains cutting fluid and prevent chip to tool welding.
Gray 17mm Cutting Diameter High Speed Steel Taper Shank Twist Flute Drill Bit
- Product name taper shank twist drill bitmaterial hsscutting diameter 17mm/ 066″. Neck size 11 x 15mm/ 04″ x 059″ (ld)flute length 127mm/ 5″total length total length. Package content package content1 x taper shank twist drill bit 1 x taper shank twist drill bit. 225mm/ 88″ 225mm/ 88″total weight 238g. Shank maxdiameter 18mm/ 07″shank length(include tang) 80mm/ 31″tang size 13 x 13 x 6mm/ 05″ x 05″ x 02″ (lwt).
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
