Top 25 Angles

 

Makita GA4530 4-12-Inch Angle Grinder #ad

Makita GA4530 4-1/2-Inch Angle Grinder

Makita GA4530 4-1/2-Inch Angle Grinder #ad - Compact design at only 40 lbs for reduced operator fatigue. Slide switch design with lock-on for added user convenience. Powerful 60 amp motor delivers 11,000 rpm for the most demanding applications. Protective zig-zag varnish seals the armature from dust and debris for longer tool life. Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life.

 

PORTER-CABLE Angle Grinder Tool 4-12-Inch 6-Amp PCEG011 #ad

PORTER-CABLE Angle Grinder Tool, 4-1/2-Inch, 6-Amp (PCEG011)

PORTER-CABLE Angle Grinder Tool, 4-1/2-Inch, 6-Amp (PCEG011) #ad - Soft start for smooth start-up. Tool-free guard change for easy changes and repositioning. Integrated spindle lock for fast and easy wheel changes with a single wrench. Multiple handle positions right, left, top. No-volt switch to help prevent accidental restarts following a power disruption when the tool is left in the “on” position.

 

Ingersoll Rand 3101G Edge Series Air Angle Die Grinder Black #ad

Ingersoll Rand 3101G Edge Series Air Angle Die Grinder, Black

Ingersoll Rand 3101G Edge Series Air Angle Die Grinder, Black #ad - Ergonomic grip. Self-locking lever throttle. Grease fitting for increased angle gear life. Rear exhaust.

 

CP875-22500 RPM - 14 Collet - Pneumatic Right Angle Pistol Grip Die Grinder #ad

#CP875-22;500 RPM – 1/4” Collet – Pneumatic Right Angle Pistol Grip Die Grinder

#CP875-22;500 RPM – 1/4” Collet – Pneumatic Right Angle Pistol Grip Die Grinder #ad - This product is made in united states and it is manufactured by chicago pneumatic. The product type is #cp875, 22 500 rpm, 1/4” collet – pneumatic right angle pistol grip die grinder.

 

DEWALT 20V MAX Right Angle Cordless DrillDriver Kit DCD740C1 #ad

DEWALT 20V MAX Right Angle Cordless Drill/Driver Kit (DCD740C1)

DEWALT 20V MAX Right Angle Cordless Drill/Driver Kit (DCD740C1) #ad - Compact front-to-back length (4 inches) allows users to fit into hard-to-reach spaces. Light weight at only 39 pounds to minimize user fatigue. Dual speed ranges (0-600/0-2000) rpm for increased user flexibility provides a wide range of applications. Powered by an energy star-qualified charger for a better environment. Multi-grip trigger provides comfort and convenience, allowing the user to get into tighter spaces.

 

Digital Angle Finder by TickTockTools - Magnetic Mini Level and Bevel Gauge - Woodworking with Table or Miter Saw - Inclinometer - Precise Measurement Tool with LCD and Backlight - 180 Degree Rotation #ad

Digital Angle Finder by TickTockTools – Magnetic Mini Level and Bevel Gauge – Woodworking with Table or Miter Saw – Inclinometer – Precise Measurement Tool with LCD and Backlight – 180 Degree Rotation

Digital Angle Finder by TickTockTools – Magnetic Mini Level and Bevel Gauge – Woodworking with Table or Miter Saw – Inclinometer – Precise Measurement Tool with LCD and Backlight – 180 Degree Rotation #ad - Rigorous quality control testing and worry-free portability strong aluminum alloy frame rugged carrying case provided to further protect your level box from unnecessary wear and tear and allows you to place it with the other tools in your toolbox without worrying about it getting damaged you can easily take this highly portable and sturdy precision tool with you anywhere you need it to go without worry this tool fits where many traditional tools won’t including your front pocket. 100% satisfaction guarantee our multi-purpose digital angle finder with level and bevel gauge is backed by our manufacturer 30 day money back guarantee with 1 year free replacement warranty we stand behind our products so you can rest assured with your purchase. 1 long lasting aaa battery is included for your convenience so no more having to wait until you can get to the store or having to steal batteries from your kids toys or the remote control to get started automatic shut off feature also helps to preserve the long battery life time is your most precious asset and this tool is guaranteed to help you waste less of it in so many ways. This sturdy mini tool also functions as an inclinometer, protractor, and a level and bevel gauge giving you a variety of uses with a rotation range of 360 degrees large, easy to read and highly accurate lcd display with backlight automatically inverts digits 180 degrees for overhead measurements making difficult work quick and effortless readout quickly stabilizes and the numbers won’t jump around so you can work much faster. Multi-purpose digital angle gauge with superior 3 button functionality includes a zero feature to determine relative angles and hold feature to freeze readouts strong magnetic base for precision measurements and cuts that make your woodworking, carpentry, construction, and other jobs much easier easily mounts to miter saw blades table saw blades and protractor tables in addition to other metal surfaces set up your wood or machine shop accurately and keep it that way with almost no effort.

 

DEWALT DWARAFS Right Angle Flex Shaft 12 #ad

DEWALT DWARAFS Right Angle Flex Shaft, 12″

DEWALT DWARAFS Right Angle Flex Shaft, 12″ #ad - These have a rapid load design for quick bit changes. Shank. The flexible shaft allows you to reach nearly any space, side handle for additional leverage and support, and the hex shank accepts any 1/4 in. The dewalt dwarafs 12-inch right angle flex shaft features a true 90 degree right angle head for versatility. The fastener is supported by magnet for 100% alignment.

 

Neiko 10529A 38 Close Quarter Power Drill 55-Degree Angle  Variable Speed 0-1400 RPM  120V #ad

Neiko 10529A 3/8″ Close Quarter Power Drill, 55-Degree Angle | Variable Speed (0-1400 RPM) | 120V

Neiko 10529A 3/8″ Close Quarter Power Drill, 55-Degree Angle | Variable Speed (0-1400 RPM) | 120V #ad - 55-degree angle allows drill to reach into places other drills won’t, 3/8-inch keyed bit chuck with chuck key included. Suitable for use on wood, composition materials, plastics, masonry, metal, and screws. Variable speed ranges from 0 to 1400 rpm for precision drilling in tight spaces, forward/reverse switch allows easy directional changes. Power supply 120v ~ 60hz, motor power 38 amps, etl approved. Ergonomically designed paddle trigger and pistol grip for precise drilling and rpm control grip is slightly textured to prevent slips.

 

DEWALT 20V MAX Right Angle Drill Cordless Tool Only DCD740B #ad

DEWALT 20V MAX Right Angle Drill, Cordless, Tool Only (DCD740B)

DEWALT 20V MAX Right Angle Drill, Cordless, Tool Only (DCD740B) #ad - Compact front to back length (40″) allowing users to fit into hard to reach spaces. Dual speed ranges (0-650/0-2000) rpm for increased user flexibility providing a wide range of applications. Multi-grip trigger provides comfort and convenience, allowing the user to get into tighter spaces while still having access to the trigger. 3/8″ ratcheting chuck with deep hex pocket allows 2″ (50 mm) hex bit to be fully inserted for getting into tight spaces.

 

Bevel Corner Protractor Corner Angle Finder for Multi Angle Measurement Tool for Woodworking #ad

Bevel & Corner Protractor, Corner Angle Finder for Multi Angle Measurement Tool for Woodworking

Bevel & Corner Protractor, Corner Angle Finder for Multi Angle Measurement Tool for Woodworking #ad - Flexible, self-inverting display in bevel box makes for easy slope readings when instrument is upside down. Convenient, digital level angle finder tool with automatic powering off and hold function low battery warning supplied in angle meter magnetic base is used to secure angle gauge to ferrous surfaces such as table saws. Certified, ip54 dust and water resistant digital gauge. Backlight, can be switched on and off taking readings in dark spaces is so easy now. Versatile, angle cube measuring absolute and relative angles in degrees ° or tilt % sturdy and durable aluminum frame, compact and lightweight, easy to carry and use.

 

DEWALT Angle Grinder Tool 4-12-Inch Paddle Switch 7-Amp DWE4012 #ad

DEWALT Angle Grinder Tool, 4-1/2-Inch, Paddle Switch, 7-Amp (DWE4012)

DEWALT Angle Grinder Tool, 4-1/2-Inch, Paddle Switch, 7-Amp (DWE4012) #ad - 5/8″-11 spindle thread accepts a wide range of 4-1/2″ accessories. 75 amp ac/dc, 12,000 rpm motor designed for faster material removal. One-touch guard allows for a single action to adjust the guard. 2-position removable side handle provides increased comfort and control.

 

Miter Angle Measuring RulerAluminium Alloy ProtractorCorner Angle Finder Multi Angle Measurement Tool Bevel Corner Protractor Angle Divider for Woodworking Flooring Tile - Rust-proof by Yoruii #ad

Miter Angle Measuring Ruler,Aluminium Alloy Protractor,Corner Angle Finder Multi Angle Measurement Tool Bevel & Corner Protractor Angle Divider for Woodworking Flooring Tile – Rust-proof by Yoruii

Miter Angle Measuring Ruler,Aluminium Alloy Protractor,Corner Angle Finder Multi Angle Measurement Tool Bevel & Corner Protractor Angle Divider for Woodworking Flooring Tile – Rust-proof by Yoruii #ad - Portable with the adjustable and foldable design, not only is this ruler easy to use, but also convenient to carry or storealuminium alloy makes the ruler durable in any job and industry your measurement tools are foldable for easy storage and feature a one-handed operation with a unique tightening mechanism. Easy to use place it on the work area, slide the ruler into the desired shape, and tighten the screws there, you can make perfect measurements and now you can transfer and track them to any material. Precision measurement its adjustable screw cap allows us to choose a fixed angle, plus a slidable design will help to convert or remove the angles easily this tool precisely measures angles, then locks the angle, and also divides the angle perfectly. Note this product is of yoruii brand and is only allowed to be sold in needl co stores other brands are fake products please don’t buy cheap imitationshigh-qualitymade of high quality aluminium alloy, this protractor is superior and stronger than traditional plastic angle divider it is resistant to scratch and very durable using laser engraving technology, the angle degree is directly engraved onto the aluminum alloy ruler, which will not be worn out easilygift a carpenter’s pencil. Multifunctional woodworking ruler this angle square rulerr could create special angles or shapes for flooring, brick, tiles, stones and so on woodworkin.

 

Avid Power Angle Grinder 75-Amp 4-12 inch with 2 Grinding Wheels 2 Cutting Wheels Flap Disc and Auxiliary Handle #ad

Avid Power Angle Grinder 7.5-Amp 4-1/2 inch with 2 Grinding Wheels, 2 Cutting Wheels, Flap Disc and Auxiliary Handle

Avid Power Angle Grinder 7.5-Amp 4-1/2 inch with 2 Grinding Wheels, 2 Cutting Wheels, Flap Disc and Auxiliary Handle #ad - Safety protection & durable during operation, the protective cover of the portable grinder will prevent sparks and metal chips during use to protect you from injury. Package included angle grinder, 2 x metal grinding wheel , 2 x cutting wheel, 1 x side handle, 2 x carbon brush, 1 x spanner, 1 x flap discs, user manual and us based customer service. Powerful angle grinder equipped with 75 amps motor with 900w max output power, this portable grinder can produce no-load speed of 11000rpm for most demanding applications. Ergonomic design slim, lightweight and compact body design can provide better comfort and reduce fatigue in professional cutting and grinding applications. Convenient operation integrated spindle lock on the disc grinder is for quicker and easier abrasive wheels replacement 2-position auxiliary handle position for greater control, comfort & versatility in all applications.

 

iGaging Digital Angle Cube Guage Bluetooth BevelLevelProtractor Magnetic Panes Lighted XL LCD #ad

iGaging Digital Angle Cube Guage Bluetooth Bevel/Level/Protractor Magnetic Panes Lighted XL LCD

iGaging Digital Angle Cube Guage Bluetooth Bevel/Level/Protractor Magnetic Panes Lighted XL LCD #ad - Portable digital angle gauge with magnetic basefeature rich, smaller and lighter than ever before. The magnets in 3 facets allow you to attach the cube to any steel object. Connect to any bluetooth enabled device. Lighted displaysuper large reversible lcd displaydimensions 2. Featuresbluetooth data connectivity. 91″weight 2. 13″ x 2. Large lcd display reads upright at any angle. 7ozrechargeable battery installed. Charging from any usb port. 2° degreestangent tilt rate percent, shows tilt in percentauto shutoffsoft case included. Get precise angle readings. 05° degrees accuracy 0. (Cable included)tracing absolute levelmeasure relative bevel embedded strong rare earth magnets on three sidesip54 dust & moisture protection measure range 360° degrees (4 x 90° degrees) resolution 0. 13″ x 0. Digital angle gauge/inclinometer is great for precision angle measurements.

 

Bevel Corner Protractor Aluminium Alloy ProtractorCorner Angle Finder for Multi Angle Measurement Tool for Woodworking #ad

Bevel Corner Protractor, Aluminium Alloy Protractor,Corner Angle Finder for Multi Angle Measurement Tool for Woodworking

Bevel Corner Protractor, Aluminium Alloy Protractor,Corner Angle Finder for Multi Angle Measurement Tool for Woodworking #ad - There’s no need to create a new template for each new job, and you don’t need to re-measure the same angle over and over again, the measurement protractor saves you time and effort. Multiple applications perfect for brick, tile, wood, stone, laminate and any other material durable, compact and lightweight an excellent portable tool that can be easily folded and carried to your next project. Easy to use place the protractor on the work area, slide the ruler into the desired shape, and tighten the screws there, you can make perfect measurements and now you can transfer and track them to any material. Stainless steel makes the ruler durable in any job and industry your measurement tools are foldable for easy storage and feature a one-handed operation with a unique tightening mechanism. The multi-angle gauge slides and locks to any desired angle, saving time for repeated measurements the four-sided ruler can be a reusable template for endless applications.

 

Makita 9557PBX1 4-12 Paddle Switch Cut-OffAngle Grinder #ad

Makita 9557PBX1 4-1/2″ Paddle Switch Cut-Off/Angle Grinder

Makita 9557PBX1 4-1/2″ Paddle Switch Cut-Off/Angle Grinder #ad - Diamond wheel. Small diameter barrel grip (only 2 to 1/2 inches ) for added comfort. Protective zig zig varnish seals the armature from dust and debris for longer tool life. Thicker coil wires are wound more closely to reduce heat and energy loss. All ball bearing design and metal gear housing for durability. Paddle switch. (1) 4 1/2inches general purpose turbo rim diamond blade a 94552. Metal gear housing. Powerful 75 amp motor for high output power in a more compact tool (only 45 pounds). (5) 4 1/2 inches 24 grit grinding wheels 741423-0-1. Ac/dc switch for use with alternative power source. 4 4 1/2 grinding wheels. Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life. Lock on/off feature for continuous operation. Aluminum case. Extra large paddle switch for comfortable operation.

 

Homder Digital Angle Gauge Level Box Protractor Angle Finder Inclinometer with Magnetic BaseCalculating for CarpentryBuildingMasonry Automobile etc #ad

Homder Digital Angle Gauge Level Box Protractor Angle Finder Inclinometer with Magnetic Base,Calculating for Carpentry,Building,Masonry, Automobile etc

Homder Digital Angle Gauge Level Box Protractor Angle Finder Inclinometer with Magnetic Base,Calculating for Carpentry,Building,Masonry, Automobile etc #ad - ☛【V-groove magnetic design】digital protractor can firmly attaches to curved metallic pipe,also can firmly attaches to any metallic surfaces(tables, fences, blades),but the older-level box can’t do it. ☛【Easy to use】digital angle gauge only 2 buttonsthe “zero”of button can set zero function at any angle,the other is “on/off” buttoneasy to use, easy to operate. ☛【Upgraded lcd display】it is more easier and clearer to read the values even work at night,because upgraded lcd display with new black-light white characters functionwhat more,lcd display with a low battery indicate. ☛【Auto power off】digital level box is operated by 2pcs aaa lr03 batteries(included) and will automatically turn off after 5 minutes of no operation. ☛【high accuracy】the digital angle finder with 0 to 360°(490°) measuring range ,resolution 001°,accuracy ±01°at 0°and 90°,±02°at the rest angles,measures angle in °(degrees)it helps your work more easier.

 

Bosch 5 In Variable-Speed Angle Grinder with Paddle Switch and Dust Guard GWS13-50VSP-DG #ad

Bosch 5 In. Variable-Speed Angle Grinder with Paddle Switch and Dust Guard GWS13-50VSP-DG

Bosch 5 In. Variable-Speed Angle Grinder with Paddle Switch and Dust Guard GWS13-50VSP-DG #ad - Durability featuring carbon brushes to provide more durability than previous-generation brushes the gws13-50vsp-dg also comes complete with bosch service minder brushes to let the user know when preventative maintenance is required. Comfort the tool also features vibration control with a two=position side handle while the paddle switch presents multiple, comfortable grip positions. Dust guard the bosch gws13-50vsp-dg angle grinder and dust guard package delivers all-in-one solution that can help user move toward compliance with the osha silica dust regulation. Stability the bosch angle grinder comes complete with a large, durable dust guard footplate to help increase stability during use for clean and accurate cuts the included dust guard also features a single-screw depth adjustment. Power featuring a powerful 13-amp grinder motor, the gws13-50vsp-dg angle grinder is able to produce up to 11,500 rpm along with that, the direct-motor cooling allows for higher overload capabilities.

 

BORA 530401 MiteriX Angle Duplicating Tool Miter Duplicator  Angle Measuring Tool That Splits In Half So You Can Transfer the Exact Miter Angle to Your Miter Saw #ad

BORA 530401 MiteriX Angle Duplicating Tool. Miter Duplicator / Angle Measuring Tool That Splits In Half So You Can Transfer the Exact Miter Angle to Your Miter Saw

BORA 530401 MiteriX Angle Duplicating Tool. Miter Duplicator / Angle Measuring Tool That Splits In Half So You Can Transfer the Exact Miter Angle to Your Miter Saw #ad - Simpler and more accurate than a protractor, ideal for crown molding, casing, baseboard, trim, decking etc. Say no to math no scale to read save time and material. Get a perfect angle every time, the bora miterix is specifically designed to ensure that your miter cuts are at the perfect angle. Aluminum measurement arms give excellent rigidity and referencing when measuring. Measure, lock, then transfer, use the tool to measure the exact miter angle you need, lock the arms in place, and transfer that exact angle to your miter saw. Easy storage, collapsible and foldable for easy storage in your tool box. Works with any angle -measures internal or external corners from 0-180 degrees (producing miter angle from 0-90 degrees).

 

HERZO Universal Surface Grinding Dust Shroud for Angle Grinder 5-inch #ad

HERZO Universal Surface Grinding Dust Shroud for Angle Grinder 5-inch

HERZO Universal Surface Grinding Dust Shroud for Angle Grinder 5-inch #ad - Allows collection of harmful dust suface grinding application. Suction hood with clamp fitting, 4 pcs clamping washer thickness 15-55mm,locking attachment to vac hose. Sutiable for 48-51mm angle grinder front cap. Dust extraction guard with brush ring. Suitable for bosch,makita ,dewalt,kress,milwaukee etc 80% main brand 4″/5″ angle grinder.

 

EZ-Fluid 12-in Nominal Comp 58 OD Comp x 38-in OD Comp 14-Turn Chrome Brass Angle Stop Valve Water Shut Off Ball Valve Lead Free 10-Packs #ad

EZ-Fluid 1/2-in Nominal Comp (5/8″ OD Comp) x 3/8-in OD Comp 1/4-Turn Chrome Brass Angle Stop Valve Water Shut Off Ball Valve Lead Free (10-Packs)

EZ-Fluid 1/2-in Nominal Comp (5/8″ OD Comp) x 3/8-in OD Comp 1/4-Turn Chrome Brass Angle Stop Valve Water Shut Off Ball Valve Lead Free (10-Packs) #ad - Pack of 10 pcs angle stop valve. 1/4-turn valve operation means only a quarter turn of the handle. Lead free compliant with low-lead legislation act s3874 & ab1953. Inlet 5/8″ od (1/2″ nominal, fits 1/2″ copper pipe), outlet 3/8″ od compression. Shut-off chrome brass angle stop valve for faucets and toilets.

 

General Tools 29 Plastic Protractor and Angle Finder Outside Inside Sloped Angles 0° to 180° #ad

General Tools 29 Plastic Protractor and Angle Finder, Outside, Inside, Sloped Angles, 0° to 180°

General Tools 29 Plastic Protractor and Angle Finder, Outside, Inside, Sloped Angles, 0° to 180° #ad - Transfer angles, with this plastic protractor, you can transfer odd angles to your miter saw. Fine black graduations, from 0° to 180° in opposite directions. Inside, outside and sloped angles, this plastic protractor/angle finder measures inside, outside and slope angles. Various projects, protractor/angle finder is ideal for construction jobs, cabinet-making and fine carpentry, where a standard protractor or t-bevel won’t fit. Four piece sturdy design, with brass lock nut.

 

Strongman Tools  Heavy Duty Aluminum Alloy Angle Template Tool  Multi Function Universal Layout Measuring Ruler  3 Bonus Items - Protective Pouch Builders Pencil and Instructions  Perfect Present #ad

Strongman Tools | Heavy Duty Aluminum Alloy Angle Template Tool | Multi Function Universal Layout Measuring Ruler | 3 Bonus Items – Protective Pouch, Builders Pencil and Instructions | Perfect Present

Strongman Tools | Heavy Duty Aluminum Alloy Angle Template Tool | Multi Function Universal Layout Measuring Ruler | 3 Bonus Items – Protective Pouch, Builders Pencil and Instructions | Perfect Present #ad - ✔ Lifetime guarantee, your purchase is protected, return at any time if you are unhappy for a full refund what are you waiting for. ✔ Instructions, instructions included along with a link to a video which will give you thousands of ideas on how to use your new angle ruler. ✔ Industrial grade, our angle ruler is made from premium aluminum which won’t rust, break and will last longer. ✔ Versatile, easily adjust with the 4 screw bolts, create custom stencils for brick, wood, tiles, flooring, metal and much more. ✔ 3 bonuses, we have included a velvet pouch, a heavy duty builders pencil and instructions to compliment your new tool.

 

DEWALT Angle Grinder Tool 4-12-Inch to 5-Inch Trigger Switch DWE43113 #ad

DEWALT Angle Grinder Tool, 4-1/2-Inch to 5-Inch, Trigger Switch (DWE43113)

DEWALT Angle Grinder Tool, 4-1/2-Inch to 5-Inch, Trigger Switch (DWE43113) #ad - The dewalt dwe43113 4-1/2″, 5″ high performance trigger grip grinder is powered by a 13 amp motor and equipped with the dust ejection system technology designed to protect the tool from damaging dust and debris that enters through air intake vents. 1 lbs. Backed by dewalt’s 3 year limited warranty. Specs wheel diameter = 5″, spindle size = 5/8-11 inches, 1700 max watts out, tool weight = 5. This grinder also features a trigger switch with a ‘lock-on’ option the no-load speed at 9000 rpm, with inner and outer flanges. Includes 1) grinder, 1) 5″ type 27 guard, 1) side handle, inner and outer flanges. It has a side handle for an alternative grip, along with a 5″ type 27 guard.

 

Bosch 4-12-Inch Angle Grinder 1375A #ad

Bosch 4-1/2-Inch Angle Grinder 1375A

Bosch 4-1/2-Inch Angle Grinder 1375A #ad - Convenient the angle grinder also features bosch’s service minder brush system to eliminate guesswork and stops the tool when preventative maintenance is required a 5/8 inches to 11 inch spindle works with a wide array of sizes, mounting the most popular accessories. Comfort the 1375a offers a 2 position side auxiliary handle specifically designed to angle to a natural position for maximum operator comfort the top handle of the angle grinder is also ergonomically designed. Compact weighing only 375 pounds, the bosch 1375a angle grinder is lightweight, compact, and ideal for metal workers, vehicle fabricators, plumbers and other professionals who use grinders on a daily basis. Durable the 1375a angle grinder features an epoxy coated design to protect the tool from abrasive debris it was also designed with a sealed switch to keep dust and debris from entering the switch mechanism. Power the angle grinder features a powerful 60 amp motor to produce 11,000 no load rpm for professional cutting and grinding applications the efficient motor was designed with an extremely small field diameter, letting the user grind or cut with ease.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.