Top 21 Carbide Tipped Bandsaw Blades

 

Magnate M111E12T3 Carbide Tipped Bandsaw Blade, 111″ Long – 1/2″ Width; 3 Tooth; 0.025″ Thickness - Specially formulated submicron grade of carbide and triple tooth geometry. Designed for composite materials, rough cutting of abrasive wood and plywood. Wood or metal cutting 1/2″ width 3 tooth 0025″ thickness. Carbide-tipped blades are designed to be extremely wear resistant. Smooth finish for less secondary work exceptionally long life and fast cutting.

 

Magnate M105E12T3 Carbide Tipped Bandsaw Blade, 105″ Long – 1/2″ Width; 3 Tooth; 0.025″ Thickness - Smooth finish for less secondary work exceptionally long life and fast cutting. Wood or metal cutting 1/2″ width 3 tooth 0025″ thickness. Designed for composite materials, rough cutting of abrasive wood and plywood. Carbide-tipped blades are designed to be extremely wear resistant. Specially formulated submicron grade of carbide and triple tooth geometry.

 

Magnate M99E34T3 Carbide Tipped Bandsaw Blade, 99″ Long – 3/4″ Width; 3 Tooth; 0.035″ Thickness - It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. 2, if the owner’s manual is not available, refer to previous invoices. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 3 inch, 8′ 3″ ) bandsaw blades suit the following modelspowermatic 140, 143 artisan 14″ wellsaw 613 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. The new high performance back steel offers excellent fatigue life. Steel). Ebony, koa or cocabolo, abrasive non-ferrous materials. The picture depicted represents one blade the pricing is for one blade/package. E. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. This method will provide the most possible accurate length. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 99 inch ( 8 ft.

 

Magnate M161E1V3 Carbide Tipped Bandsaw Blade, 161″ Long – 1″ Width; 3-4 Variable Tooth - Wood or metal cutting 1″ width 3-4 variable tooth 0035″ thickness. Wood or metal cutting 1/2″ width 3 tooth 0025″ thickness. Specially formulated submicron grade of carbide and triple tooth geometry. Made in the usa. Designed for composite materials, rough cutting of abrasive wood and plywood.

 

Magnate M105E34T3 Carbide Tipped Bandsaw Blade, 105″ Long – 3/4″ Width; 3 Tooth; 0.035″ Thickness - The picture depicted represents one blade the pricing is for one blade/package. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. If in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. 9 inch, 8′ 9″ ) bandsaw blades suit the following modelsjet jwbs-14dxpro general international 90-200 m1 (woodworking 93-1/2 to 106-3/8) grizzly g9743 ( 7 x 12 ), 8145z (105-1/4 to 109-1/4) dake se912 (metalcutting) most 14″ bandbaws with riser block kits installed. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. The new high performance back steel offers excellent fatigue life. E. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 105 inch ( 8 ft. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Ebony, koa or cocabolo, abrasive non-ferrous materials. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. This method will provide the most possible accurate length. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. 2, if the owner’s manual is not available, refer to previous invoices. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. Steel).

 

Magnate M131.5E12T3 Carbide Tipped Bandsaw Blade, 131-1/2″ Long – 1/2″ Width; 3 Tooth - 4, upon requested, magnate makes blades of any length and types to fit your brand and model. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. Steel). 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. E. 2, if the owner’s manual is not available, refer to previous invoices. Ebony, koa or cocabolo, abrasive non-ferrous materials. 11-1/2 inch, 10′ 11-1/2″ ) bandsaw blades suit the following modelsgrizzly g0513 g0513x2 g0513b g0640x 17″ general international 90-320 m1 (metalcutting) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. The new high performance back steel offers excellent fatigue life. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 131-1/2 inch ( 10 ft. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. The picture depicted represents one blade the pricing is for one blade/package. This method will provide the most possible accurate length.

 

Magnate M99.75E12T3 Carbide Tipped Bandsaw Blade, 99-3/4″ Long – 1/2″ Width; 3 Tooth - This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. 2, if the owner’s manual is not available, refer to previous invoices. The new high performance back steel offers excellent fatigue life. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 99-3/4 inch ( 8 ft. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. 3-3/4 inch, 8′ 3-3/4″ ) bandsaw blades suit the following models craftsman professional 14 general international 90-100 m1 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. This method will provide the most possible accurate length. Ebony, koa or cocabolo, abrasive non-ferrous materials. Steel). E. E. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. The picture depicted represents one blade the pricing is for one blade/package.

 

Magnate M89.5E38T3 Carbide Tipped Bandsaw Blade, 89-1/2″ Long – 3/8″ Width; 3 Tooth - E. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 89-1/2 inch ( 7 ft. 2, if the owner’s manual is not available, refer to previous invoices. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E. Ebony, koa or cocabolo, abrasive non-ferrous materials. Steel). The new high performance back steel offers excellent fatigue life. This method will provide the most possible accurate length. The picture depicted represents one blade the pricing is for one blade/package. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. 5-1/2 inch, 7′ 5-1/2″ ) bandsaw blades suit the following models sears craftsman 12″ if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length.

 

Magnate M93.5E38T3 Carbide Tipped Bandsaw Blade, 93-1/2″ Long – 3/8″ Width; 3 Tooth - There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 93-1/2 inch ( 7 ft. 2, if the owner’s manual is not available, refer to previous invoices. The picture depicted represents one blade the pricing is for one blade/package. Ebony, koa or cocabolo, abrasive non-ferrous materials. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. 9-1/2 inch, 7′ 9-1/2″ ) bandsaw blades suit the following models craftsman professional 7 x 12 delta 28-203, 28-243, 28-245, 28-283, 28-303 grizzly g1019, g0580x g0555x (92-1/2″ to 93-1/2″) general international 90-125 m1 jet jwbs-14dx, jwbs-14cs,jwbs-14os jbs14-mw, jbs14-14cs, jbs14-140s chicago industrial 14″ reliant 14″ central machinery 00580-obme elephant 14″ rikon 10-315 powermatic pwbs-14cs enlon brigewood rikon 10-320 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. E. The new high performance back steel offers excellent fatigue life. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. This method will provide th. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. E. Steel).

 

Magnate M103E1V3 Carbide Tipped Bandsaw Blade, 103″ Long – 1″ Width; 3-4 Variable Tooth - Carbide tipped teeth increase wear resistance cutting high temperature alloys. Positive rake angle allows faster penetration for high production cutting. Wood or metal cutting 1″ width 3-4 variable tooth 0035″ thickness. Plastic capping protects teeth against damage in transit and handling. Measures 162-inches length by 1-inches width by 0042-inches thick.

 

Magnate M93.5E34T3 Carbide Tipped Bandsaw Blade, 93-1/2″ Long – 3/4″ Width; 3 Tooth - Made in the usa. Carbide-tipped blades are designed to be extremely wear resistant. Designed for composite materials, rough cutting of abrasive wood and plywood. Wood or metal cutting 3/4″ width 3 tooth 0035″ thickness. Specially formulated submicron grade of carbide and triple tooth geometry.

 

Magnate M143E34T3 Carbide Tipped Bandsaw Blade, 143″ Long – 3/4″ Width; 3 Tooth; 0.035″ Thickness - This method will provide the most possible accurate length. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. The new high performance back steel offers excellent fatigue life. E. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 143 inch ( 11 ft. E. 11 inch, 11′ 11″ ) bandsaw blades suit the following modelsgrizzly g0514x, g0514x2, g0514x2b, g0514x3 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. The picture depicted represents one blade the pricing is for one blade/package. Steel). It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. Ebony, koa or cocabolo, abrasive non-ferrous materials. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. 2, if the owner’s manual is not available, refer to previous invoices. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish.

 

Magnate M93.5E12T3 Carbide Tipped Bandsaw Blade, 93-1/2″ Long – 1/2″ Width; 3 Tooth - The new high performance back steel offers excellent fatigue life. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. The picture depicted represents one blade the pricing is for one blade/package. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. This method will provide th. Steel). E. 2, if the owner’s manual is not available, refer to previous invoices. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 93-1/2 inch ( 7 ft. 9-1/2 inch, 7′ 9-1/2″ ) bandsaw blades suit the following models craftsman professional 7 x 12 delta 28-203, 28-243, 28-245, 28-283, 28-303 grizzly g1019, g0580x g0555x (92-1/2″ to 93-1/2″) general international 90-125 m1 jet jwbs-14dx, jwbs-14cs,jwbs-14os jbs14-mw, jbs14-14cs, jbs14-140s chicago industrial 14″ reliant 14″ central machinery 00580-obme elephant 14″ rikon 10-315 powermatic pwbs-14cs enlon brigewood rikon 10-320 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Ebony, koa or cocabolo, abrasive non-ferrous materials. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc.

 

Magnate M131.5E34T3 Carbide Tipped Bandsaw Blade, 131-1/2″ Long – 3/4″ Width; 3 Tooth - This method will provide the most possible accurate length. E. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 11-1/2 inch, 10′ 11-1/2″ ) bandsaw blades suit the following modelsgrizzly g0513 g0513x2 g0513b g0640x 17″ general international 90-320 m1 (metalcutting) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Ebony, koa or cocabolo, abrasive non-ferrous materials. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 131-1/2 inch ( 10 ft. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Steel). 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. E. The new high performance back steel offers excellent fatigue life. The picture depicted represents one blade the pricing is for one blade/package. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 2, if the owner’s manual is not available, refer to previous invoices.

 

Magnate M130E34T3 Carbide Tipped Bandsaw Blade, 130″ Long – 3/4″ Width; 3 Tooth; 0.035″ Thickness - Wood or metal cutting 1″ width 3 tooth 0035″ thickness. Wood or metal cutting 1″ width 3-4 variable tooth 0035″ thickness. Positive rake angle allows faster penetration for high production cutting. Wood or metal cutting 3/8″ width 3 tooth 0032″ thickness. Wood or metal cutting 3/4″ width 3 tooth 0035″ thickness.

 

Magnate M103E1T3 Carbide Tipped Bandsaw Blade, 103″ Long – 1″ Width; 3 Tooth; 0.035″ Thickness - Positive rake angle allows faster penetration for high production cutting. Carbide tipped teeth increase wear resistance cutting high temperature alloys. Measures 162-inches length by 1-inches width by 0042-inches thick. Wood or metal cutting 1″ width 3-4 variable tooth 0035″ thickness. Wood or metal cutting 1″ width 3 tooth 0035″ thickness.

 

Magnate M143E1V2 Carbide Tipped Bandsaw Blade, 143″ Long – 1″ Width; 2-3 Variable Tooth - Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. 2, if the owner’s manual is not available, refer to previous invoices. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. E. 11 inch, 11′ 11″ ) bandsaw blades suit the following modelsgrizzly g0514x, g0514x2, g0514x2b, g0514x3 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. The picture depicted represents one blade the pricing is for one blade/package. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 143 inch ( 11 ft. Ebony, koa or cocabolo, abrasive non-ferrous materials. This method will provide the most possible accurate length. Steel). Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. The new high performance back steel offers excellent fatigue life.

 

Magnate M67E12T3 Carbide Tipped Bandsaw Blade, 67″ Long – 1/2″ Width; 3 Tooth; 0.025″ Thickness - The new high performance back steel offers excellent fatigue life. Ebony, koa or cocabolo, abrasive non-ferrous materials. This method will provide the most possible accurate length. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Steel). 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. The picture depicted represents one blade the pricing is for one blade/package. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. 7 inch, 5′ 7″ ) bandsaw blades suit the following models ryobi bs1001svtradesman 8168 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. E. 2, if the owner’s manual is not available, refer to previous invoices. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 67 inch ( 5 ft.

 

Magnate M131E1V3 Carbide Tipped Bandsaw Blade, 131″ Long – 1″ Width; 3-4 Variable Tooth - It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. 11 inch, 10′ 11″ ) bandsaw blades suit the following modelgrizzly g0664 (metalcutting). This method will provide the most possible accurate length. E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. E. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Ebony, koa or cocabolo, abrasive non-ferrous materials. 2, if the owner’s manual is not available, refer to previous invoices. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 131 inch ( 10 ft. The new high performance back steel offers excellent fatigue life. The picture depicted represents one blade the pricing is for one blade/package. If in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Steel). 4, upon requested, magnate makes blades of any length and types to fit your brand and model. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced.

 

Magnate M120E1T3 Carbide Tipped Bandsaw Blade, 120″ Long – 1″ Width; 3 Tooth; 0.035″ Thickness - If in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Steel). E. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. E. The new high performance back steel offers excellent fatigue life. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 120 inch ( 10 ft. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. 2, if the owner’s manual is not available, refer to previous invoices. , 10′ ) bandsaw blades suit the following models grizzley g0659 9″x 14″ vertical (metalcutting) dake 14-10 dake sxc general international 90-840 m1 jet vsf-14-1, vsf-14-3. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Ebony, koa or cocabolo, abrasive non-ferrous materials. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. This method will provide the most possible accurate length. The picture depicted represents one blade the pricing is for one blade/package.

 

Magnate M114.5E1V3 Carbide Tipped Bandsaw Blade, 114-1/2″ Long – 1″ Width; 3-4 Variable Tooth - The picture depicted represents one blade the pricing is for one blade/package. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Steel). 4, upon requested, magnate makes blades of any length and types to fit your brand and model. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. 6-1/2 inch, 9′ 6-1/2″ ) bandsaw blades suit the following model jet j-7015 8″ x 13″ if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 114-1/2 inch ( 9 ft. E. The new high performance back steel offers excellent fatigue life. Ebony, koa or cocabolo, abrasive non-ferrous materials. 2, if the owner’s manual is not available, refer to previous invoices. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. This method will provide the most possible accurate length. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.