SEPTLS5851921 – Irwin hanson Carbon Steel Taper Pipe Tap Sets – 1921
- Includes, wooden case. Quantity, 6 per case. Wt, 3 3/4 lb. Material, carbon steel. Thread, tpi or pitch, 1/8 in, 27 npt, 1/4 in, 18 npt, 3/8 in, 18 npt, 1/2 in, 14 npt, 3/4 in, 14 npt, 1 in, 11 1/2 npt.
Vermont American 20373 3/8-18 NPT High Carbon Steel Pipe Tap
- High carbon steel pipe taps are ideal for pipe fittings, cutting internal threads and wherever an extremely tight fit is required. Taper taps have 8 to 10 threads chamfered for easy starts in tough materials. Four flute design on all taps ensures fast and easy chip clearance. Required drill size is permanently etched on the tool for quick and easy reference.
HHIP 1011-3220 3/8-18 NPT HSS Taper Pipe Tap
- ~ Number of flutes is 4. ~ Cuts internal threads in pipes. ~ Tapered at a rate of 3/4″ per foot. ~ High speed steel. ~ Overall length is 2-7/16″. 3/8-18 npt high speed steel taper pipe tap ~ thread ground. ~ Ideal for pipe fitting. ~ Thread length is 1-1/16″.
1/2″-14 NPS High Speed Steel Straight Pipe Tap
- Often used in light fixtures and lamps. . The “pipe size” listed (such as 1/2″-14) gives the inside diameter of the pipe this tool is intended to thread a hole to accept the outside of, followed by the threads per inch the tap will cut.
Bosch 95495 Black Oxide Pipe Tap, 1/4″ x 18″
- Black oxide coating provides corrosion resistance. Rolled threads provide more accuracy than machined threads. Laser-etched marking ensures size identification won’t wear off. Heat-treated carbon steel provides long life and clean, accurate threads.
Drillco 2700E Series Carbon Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 1/2″-14 Size
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Made of carbon steel. Comes with round with square end shank. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
TAP PIPE 3/4-14NPT by IRWIN MfrPartNo 1906ZR
- -Tapered at a rate of 3/4″ per foot. Warranty -lifetime warranty does not cover abuse. -3/4”, 14 npt taper tap. -Ideal for pipe fittings. -Nominal size of the tap is that of the pipe fitting being tapped. Hn1906 features -cuts internal threads in pipes.
2″-11-1/2 NPT National Pipe Taper Carbon Steel Pipe Tap
- Makes a thread for standard “2” pipe”, the actual thread dimension is greater than 2″. Npt=3/4″ per foot taper. Size-thread 2″, 11 1/2.
ZFE 1Pc 1/8″-27 HSS NPS Straight Pipe Tap Machine Thread Tap
- 1/8″, 27 nps. Round shank with square end allows tap to be used in hand or power-driven applications. Hand threading tap with straight flutes cuts threads in through holes and blind holes. Zfe 1/8″-27 hss nps straight pipe tap machine thread tap. High-speed steel for compatibility with a variety of materials.
CMT 1/2″ – 14 NPT PIPE TAP 88-0012
- Cuts internal threads in pipes nominal size of the tap is that of the pipe fitting being tapped available in national pipe taper (npt) ideal for pipe fittings specifications cuts intragroup threads in pipes 1/2″, 14 npt nominal sizing of the tap is the sizing of the pipe meet existence abroach thread standard = npt no. Of flutes = 4 outside cutting direction = right style = taper applicable materials = most metals material = high carbon steel.
CMT 1-1/2″ – 11.5 NPT PIPE TAP 88-0112
- Of flutes = 6 outside cutting direction = right style = taper applicable materials = most metals material = high carbon steel. 5 npt nominal sizing of the tap is the sizing of the pipe meet existence abroach thread standard = npt no. Cuts internal threads in pipes nominal size of the tap is that of the pipe fitting being tapped available in national pipe taper (npt) ideal for pipe fittings specifications cuts intragroup threads in pipes 1-1/2″, 11.
1 Set of 6 Piece Pipe Tap & Die – 1/4″ 3/8″ 1/2″ STEEL TAP & DIE TOOL THREADER THREAD KIT PIPE THREADING
- Precision ground heat treated alloy steel. Die sizes 1/4″-18 npt, 3/8″-18 npt, and 1/2″-14 npt. Wooden storage case. 6 piece pipe tap & die set. Tap sizes 1/4″-18 npt, 3/8″-18 npt, and 1/2″-14 npt.
Vermont American 20371 1/8-27 NPT High Carbon Steel Pipe Tap
- Four flute design on all taps ensures fast and easy chip clearance. Taper taps have 8 to 10 threads chamfered for easy starts in tough materials. Required drill size is permanently etched on the tool for quick and easy reference. High carbon steel pipe taps are ideal for pipe fittings, cutting internal threads and wherever an extremely tight fit is required.
G 1/8″ – 28 HSS BSP Parallel British Standard Pipe Tap
- G 1/8″, 28 hss bsp parallel british standard pipe tap. High speed steel.
1/8″-27 NPS High Speed Steel Straight Pipe Tap
- . High speed steel straight pipe tap, nominal pipe size, these taps are mainly used for hand and machine tapping of straight pipe threads.
Drill America DWT64116 Qualtech High-Speed Steel Pipe Tap, Uncoated (Bright) Finish, Round with Square End Shank, 1/8″-27 NPS
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Round shank with square end. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
Irwin Industrial Tools 1921ZR Taper Pipe Tap Set, 6-Piece
- Available in national pipe taper (npt) and british standard pipe taper (bsp). Nominal size of the tap is that of the pipe fitting being tapped. Tapered at a rate of 3/4-inch per foot. Includes one taper tap each of 1/8″, 27 npt, 1/4″, 18 npt, 3/8″, 18 npt, 1/2″, 14 npt, 3/4″, 14 npt, and 1″, 11-1/2 npt made in the usa. Cuts internal threads in pipes ideal for pipe fittings.
IRWIN 1910ZR Tap 2″-11 1/2″ Npt Pipe
- Threading taps . Made in the united states. 1910zr, tap 2″-11 1/2npt pipe”.
Morse Cutting Tools 36183 Straight Pipe Taps, High-Speed Steel, Bright Finish, NPSF Thread, 4 Flutes, 1/4″-18″ Size
- Npsf straight pipe taps produce threads where a tight seal is achieved during assembly by metal to metal contact when assemble with dry seal taper pipe taps. .
6 Piece Pipe Tap & Die Set
- 6 piece pipe tap & die set this pipe tap set is just the thing for tapping custom pipe fittings or cleaning rust and scale from existing threads. . Cut pipe to exact lengths and thread the ends with the precision dies.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
