Hurricane Turning Tools, Spigot Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck
- The outside jaws are serrated. Normally, these are used holding small items like a box or lid. Spigot jaws can be used in expansion mode for internal holding within a straight wall. This listing is for a set of spigot jaws, which are used on the hurricane htc100 4 jaw woodturning scroll chuck. They are very useful for holding inside a candlestick. In compression mode, they can be used for holding small work. These jaws are only compatible with the htc100.
Hurricane Turning Tools, Large Dovetail Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck
- It is a super high quality chuck, without the super high price of competitive chucks. They can be used in compression mode for gripping a tenon or expansion mode for internal holding within a dovetail recess. This listing is for a set of large dovetail jaws, which are used on the hurricane htc125 4 jaw woodturning scroll chuck. Many jaw sets are available and inserts are interchangeable for use on today’s most popular lathes. These jaws are only compatible with the htc125. Don’t have an htc125 if you haven’t heard of the hurricane htc100 4″ woodturning chuck, please check it out in our ebay store.
Hurricane Turning Tools, 15″ Convertible Jumbo/Cole Jaw Kit for the the HTC125 Woodturning 4 Jaw Wood Lathe Chuck
- Jaw plate dimensions 14 1/2″ using included expansion plates (9 1/2″ with plates removed). Made of aluminium 8 rubber bumpers included. Jaw dimensions in the open position 17″. Jumbo or “cole” jaws are used for gripping the top of a bowl in compression or expansion mode, allowing you to finish the bottom of the bowl. Only compatible with the hurricane htc125.
Hurricane Turning Tools, Standard Dovetail Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck
- This listing is for a set of standard dovetail jaws, which are used on the hurricane htc100 4 jaw woodturning scroll chuck. They are typically used in compression mode for holding a tenon or “foot” on the bottom of a bowl or platter. Standard dovetail jaws are the most common jaw type used in woodturning. They can also be used in expansion mode for holding inside a dovetail recess. Measurements compression 1 3/4″, 3″ expansion 2 1/4″, 3 1/2″. These jaws are normally included in the basic chuck kit, but you might need an extra set, or purchased a chuck as “body only” these jaws are only compatible with the htc100.
PSI Woodworking LCM18X 3 Jaw Micro Wood Lathe Chuck
- Weighs only 1. 2 pounds. The provided step jaws reverse for extra versatility when securing the work piece from the outside, or inside. The smaller diameter offers a safety feature keeping your knuckles away from the jaws when working close to the chuck. Holds a workpiece from 3/4″ to 2-1/2″ inside diameter, and a workpiece from zero to 1-1/4″ outside diameter. Uses small levers to open and tighten the three jaws. This self centering, 3 jaw micro chuck is ideal for holding small projects from the inside or outside. Pre cut with a 1″ x 8 tpi standard thread mount, and includes an adapter for 3/4″ x 16 tpi spindles.
Ron Brown’s Best Longworth Chuck Type 2 Basic for 16 inch Wood Lathes
- Ron brown’s best longworth chuck type 2 is used for securely holding a bowl, plate, platter or hollow form in order to remove the tenon on the bottom of the vessel. The longworth mode utilizes two 1/2″ hdpe disks with opposing slots to move eight rubber button assemblies in or out to fit the vessel like the aperture on a camera. Many turners cut a tenon in the bottom of the bowl blank in order to grip it in a four jaw chuck for most of the material removal both inside and out. It is 100% made in america by a wood turner for woodturners. This design allows the buttons to move together in synchronization so the vessel always stays centered on the chuck. You need a way to hold a nearly finished vessel in order to then turn the tenon away so the bottom of the vessel looks finished.
Hurricane Turning Tools, Large, Deep Profile Dovetail Jaws for the HTC100 Woodturning 4 Jaw Wood Lathe Chuck
- Jaw dimensions in the open position compression mode 4 3/4″ expansion mode 6″. Made of steel. Jaw dimensions in the closed position compression mode 3 3/4″ expansion mode 5″. Deep profile dovetail jaws (3/4″) can be used for superb gripping power on large tenons this jaw profile is unique to hurricane chucks. Only compatible with the hurricane htc100.
PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System
- Basic straight jaws for 1-inch stock, square or round. Flat jaws to handle bowls up to 5-inch diameter are available (#cjawfj1). Bonus jaws to hold dowels 1-1/2-to-2-3/8-inch to grip internally 2-to-3-inch. Stepped jaws for small dowels 3/8-to-1-1/4-inch to grip internally 1-to-2-1/2-inch. Adapts to both 3/4-inch-by-16 tpi and 1-by-8 tpi spindles, and contains 2 open/close levers.
Ron Brown’s Best Longworth Chuck Type 2 Basic for 12 inch Wood Lathes
- This design allows the buttons to move together in synchronization so the vessel always stays centered on the chuck. Many turners cut a tenon in the bottom of the bowl blank in order to grip it in a four jaw chuck for most of the material removal both inside and out. The longworth chuck utilizes two 1/2″ hdpe disks with opposing slots to move eight rubber button assemblies in or out to fit the vessel like the aperture on a camera. To learn more about that option, search for ron brown’s best longworth chuck type 2 combo also offered by this seller. The longworth chuck type 2 is 100% made in america by a woodturner for woodturners. This offer is for the basic longworth chuck type 2 and does not include the optional doughnut rings. You need a way to hold a nearly finished vessel in order to then turn the tenon away so the bottom of the vessel looks finished. It is recommended that the tailstock be placed against the vessel to hold it more securely during all but the last 1″ of tenon removal. Ron brown’s best longworth chuck type 2 basic is used for holding a bowl, plate, platter or hollow form in order to remove the tenon on the bottom of the vessel.
New ER16 Collet Chuck Holder Motor Shaft Extension Rod Inner Hole 8mm excelsior mini lathe central machinery taig jet 1642 1220 vicmarc chuck wood chucks fox
- And increase the stability of the cutting. -er straight rod type collet extension handle, the handle body is relatively long, suitable for deep hole processing. -Can reduce the use of tools, reduce costs, improve efficiency. -The outer diameter of the rod and other parts of the rod can be eliminated by precision grinding, which can eliminate the unbalance.
Hurricane Turning Tools, Large Serrated Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck
- Some turners use the serrated jaws instead of dovetail jaws in compression mode for gripping a tenon or expansion mode for internal holding within a recess. Serrated jaws are used for gripping end grain cylinders. They differ from dovetail jaws in that they are not tapered and have tiny gripping “serrations”. They can be used for this but they are not as strong as dovetail jaws. This listing is for a set of large serrated jaws, which are used on the hurricane htc125 4 jaw woodturning scroll chuck.
PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System
- Barracuda2 chuck body is 3 5″ diameter and weighs 4 lbs pre-threaded to 1″ x 8tpi and includes 3/4″ x 16tpi spindle adapter. #1 step jaws 3/32″ to 1-3/8″ & 11/16″ to 2-3/8″ #2 round jaws 7/8″ to 1-1/2″ &1-1/4″ to 2″ #3 wide bowl jaws 3-1/16″ to 4-3/8″ pin jaws 1″ to 2-1/4″. This is a c-series chuck compatible with all additional c-series jaws and accessories 7-3/4″ jumbo flat jaws (cjawfj2), 5″ small flat jaws (cjawfj1), set of 2 alligator jaws (lcaljaws), pen blank drilling jaws (cjawpen), 8-1/4″ super finishing jaws (cjawxl), and more. Includes (1) barracuda2 chuck body, (4) self-centering jaw sets, (1) woodworm screw chuck, (1) spindle adapter, (1) gear key, (1) allen wrench, (8) screws, (1) storage case. With the variety of included jaws, the csc3000c will mount most turning projects onto your lathe including bowls, spindles, pens, other small turning projects, and much more.
Hurricane HTC100 4″ Woodturning 4 Jaw Chuck Kit, w/Dovetail Jaws. For Wood Lathes, Choose your Thread Size
- A great chuck for full size / midi and mini lathes. Includes standard dovetail jaws, screw, 6″ long chuck key, allen key for removing the chuck jaws and your choice of one threaded insert. The backplate is indexed in 24 positions. This 4″ (100mm) chuck is made from steel with a chrome plated body includes standard dovetail jaws, screw, 6″ long chuck key, allen key, one threaded insert. 4″ scroll chuck for woodturning hurricane chucks are known for their great quality and practical affordability.
4-Jaws x 6″ Inches Wood Lathe Chuck Threaded 3/4-16 with Independently Adjustable/Reversible Jaws (Not Chinese Made)
- 4-jaws x 6″/ 150 mm wood lathe chuck threaded 3/4″ x 16 with independently adjustable / reversible jaws. Fast shipping to usa & worldwide through trackable awb. Graded caste iron body jaws are made of alloy tool steel. Hold round stock securely with this 4-jaw scroll chuck jaws are independently adjustable, and they can be reversed includes chuck key.
BestEquip Lathe Chuck 4-inch Woodturning Chuck 4 Jaws 1inch x 8TPI Thread Lathe Chucks Set Nova Lathe Chuck Wood Lathe Bowl Chuck with Set of Quality Accessories and A Case for Woodworking
- 【Wide application】- applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories. 【Premium quality】- chuck body made of quality steel all guideways and bearing surfaces are precisely machined for better performance. 【High performance jaws】- each jaw can be adjusted to center with superior gripping force, this improves chuck flexibility, clamping most shaped workpieces can also be realized. 【Precision highly polishing】- with smooth surface, the lathe chuck is milled by pricing milling skill for high precision, accuracy and pretty appearance. 【a set of complete accessories】- this complete lathe chuck set include two jaws set and a set of installation tools, which bring much convenience for your operation.
Ron Brown’s Best Longworth Chuck Type 2 Basic for 10 inch Wood Lathes
- Many turners cut a tenon in the bottom of the bowl blank in order to grip it in a four jaw chuck for most of the material removal both inside and out. To learn more about that option, search for ron brown’s best longworth chuck type 2 combo also offered by this seller. You need a way to hold a nearly finished vessel in order to then turn the tenon away so the bottom of the vessel looks finished. This offer is for the basic longworth chuck type 2 and does not include the optional doughnut rings. Ron brown’s best longworth chuck type 2 basic is used for holding a bowl, plate, platter or hollow form in order to remove the tenon on the bottom of the vessel. The longworth chuck type 2 is 100% made in america by a woodturner for woodturners. It is recommended that the tailstock be placed against the vessel to hold it more securely during all but the last 1″ of tenon removal. The longworth chuck utilizes two 1/2″ hdpe disks with opposing slots to move eight rubber button assemblies in or out to fit the vessel like the aperture on a camera. This design allows the buttons to move together in synchronization so the vessel always stays centered on the chuck.
Hurricane Turning Tools, Large Dovetail Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck
- Many jaw sets are available and inserts are interchangeable for use on today’s most popular lathes. These jaws are only compatible with the htc100. It is a super high quality chuck, without the super high price of competitive chucks. They can be used in compression mode for gripping a tenon or expansion mode for internal holding within a dovetail recess. Don’t have an htc100 if you haven’t heard of the hurricane htc100 4″ woodturning chuck, please check it out in our ebay store. This listing is for a set of large dovetail jaws, which are used on the hurricane htc100 4 jaw woodturning scroll chuck.
LLDSIMEX 4Inch/96mm Self Centering 4 Jaws Wood Lathe Chuck Wood Working Chuck 1″-8TPI
- This 4-jaw, self-centering chuck with dovetailed jaws is great for small bowl and plate turning and features jaws that grip by clamping around the workpiece or expanding to fit a turned recess. Includes t-handled wrenches, wood screw point, compact design is ideal for smaller lathes. Max rmp 3000 details 4″ thread 1″-8 clamping range7-63 mm depth without jaws12 mm depth with jaws 18 mm thread depth 25 mm thread diameter25. 4mm overall diameter 4 inch (96 mm).
New 8-1/4″ Jumbo Jaws Set for PSI C Series Wood Lathe Chucks Turn Bowls Plates
- Thanks for stopping by. Here are the details psi cjawfj2 jumbo flat jaw set of (4) plates precision machined from steel for use on lathes with 10″ swing or larger used to finish the bottom of bowls and plates up to 8-1/4″ in diameter when used with psi utility grip chucks, barracuda chucks, and the mini grip chuck includes (8) 1/2″ long rubber coated pins (grips) includes (8) 3/4″ long rubber coated pins (grips) with hex key this is everything you need to turn your utility-grip or other “c” series psi chuck into a bowl chuck. Shipping weight is 4-1/2 lbs. His is a set of 8″ jumbo flat jaws for psi “c” series and 4-jaw utility grip, mini grip, and barracuda chucks. Note this jaw set does not fit nova or oneway chucks please study the pictures and email with any questions. Please note that we sell the psi utility-grip chuck and the psi pen blank drilling chuck that mates to these jaws on separate listings in our tool store. Fast shipping included in the usa.
Hurricane Turning Tools, Pin Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck
- This listing is for a set of pin jaws with dovetail , which are used on the hurricane htc125 4 jaw woodturning scroll chuck. The dovetail is set away from the flat jaw surface by about 1 inch. In compression mode, they can grip a small part like a final, or pen mandrel. These jaws are for small work and have several uses used in expansion mode for internal holding within a dovetail recess. These jaws are only compatible with the htc125. This gives you better access to the bottom of the bowl for easier tool work while your bowl is on the lathe. The straight side can be used to hold the inside of a small box body.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
