Top 20 Best Concrete Screws

 

Wej-It Stalgard Coated Carbon Steel Flat Head Concrete Screw USA Made 3 Phillips Drive 14 Diameter 1-14 Length Pack of 100

Wej-It Stalgard Coated Carbon Steel Flat Head Concrete Screw, USA Made, #3 Phillips Drive, 1/4″ Diameter, 1-1/4″ Length, Pack of (100)

Wej-It Stalgard Coated Carbon Steel Flat Head Concrete Screw, USA Made, #3 Phillips Drive, 1/4″ Diameter, 1-1/4″ Length, Pack of (100) - The anchor is made of 1022 carbon steel for strength and has a corrosion-resistant blue r-blocker coating that meets american society for testing and materials (astm) b117 standards to resist 1,000 hours of salt spray. 1,100 lb. The wej-it wej-con concrete screw cuts threads into concrete, hollow block, brick, mortar, and concrete masonry units (cmus) to provide a secure hold without requiring threaded inserts. For more information, see the manufacturer’s literature. The twin-lead threads and the fully threaded point cut into the mounting material to secure the screw placement and resist pull-out. Warning use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). The screw includes a drill bit to create the correct size hole for installation. The company, founded more than 60 years ago, is headquartered in norwalk, ct. 550 lb. 920 lb. What’s in the box100 wej-it fcs1411 concrete screws1 drill bit. Concrete screws are threaded fasteners that install into hard, brittle materials such as concrete, brick, and block to securely fasten a fixture. Specificationsfits hole sizeultimate tensile strength in 1,924-psi hollow block @ 1-1/4″ embedment depth and 1″ edge distanceultimate shear strength in 1,924-psi hollow block @ 1-1/4″ embedment depth and 1″ edge distanceultimate tensile strength in 2,730-psi concrete @ 1″ embedment depth and 1″ edge distanceultimate shear strength in 2,730-psi concrete @ 1″ embedment depth and 1″ edge distanceultimate tensile strength in 2,730-psi concrete @ 1-3/4″ embedment depth and 1″ edge distanceultimate shear strength in 2,730-psi concrete @ 1-3/4″ embedment depth and 1″ edge distance3/16″425 lb. The flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface. 900 lb. The screw can be removed and reinstalled into the same hole to enable fixture changes or screw replacement. The phillips drive has an x-shaped slot that accepts a phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener. 670 lb. These screws have hardened threads that cut into the sides of a drilled hole to secure their placement in the material. 1,860 lb. 860 lb. 1/4″1,000 lb. 425 lb. 695 lb. 635 lb. Wej-it fastening systems manufactures mechanical and adhesive fasteners for use in concrete and drywall.

 

IRWIN Tools 1870568 Impact Performance Series Concrete Screw Installation 316-Inch X 5-Inch Drill Bit for 14-Inch Screws

IRWIN Tools 1870568 Impact Performance Series Concrete Screw Installation 3/16-Inch X 5-Inch Drill Bit for 1/4-Inch Screws

IRWIN Tools 1870568 Impact Performance Series Concrete Screw Installation 3/16-Inch X 5-Inch Drill Bit for 1/4-Inch Screws - Black oxide finish resists corrosion and increases life of bit. One-piece construction withstands higher torque loads than standard quick-change bits. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. Built for maximum durability and long life with impact drivers.

 

14 x 1-14 Wej-It Slotted Hex Washer Head Wej-Con Tapcon Concrete Screw w Bit - 100BX

1/4″ x 1-1/4″ Wej-It Slotted Hex Washer Head Wej-Con (Tapcon) Concrete Screw w/ Bit – 100/BX

1/4″ x 1-1/4″ Wej-It Slotted Hex Washer Head Wej-Con (Tapcon) Concrete Screw w/ Bit – 100/BX - 1/4″ x 1-1/4″ wej-it slotted hex washer head wej-con (tapcon) concrete screw w/ bit, 100 pieces per box.

 

67100 316 x 1-14 Hex 100pk Concrete Screws

(67100) 3/16 x 1-1/4″ Hex 100pk Concrete Screws

(67100) 3/16 x 1-1/4″ Hex 100pk Concrete Screws - Corrosion resistance, pt lumber can be used. Acr2 bit and 5/32″ drill bit included. Complete system. Heads will not strip out-allows for more torque. Patented phillips ii with acr drive drive system.

 

IRWIN Tools 1881080 Impact Performance Series Concrete Screw Drill-Drive Installation Set for 316-Inch and 14-Inch Screws 7-Piece

IRWIN Tools 1881080 Impact Performance Series Concrete Screw Drill-Drive Installation Set for 3/16-Inch and 1/4-Inch Screws, 7-Piece

IRWIN Tools 1881080 Impact Performance Series Concrete Screw Drill-Drive Installation Set for 3/16-Inch and 1/4-Inch Screws, 7-Piece - One-piece construction withstands higher torque loads than standard quick-change bits. Manufactured with heavy-duty, cold-forged, high-grade steel to withstand high torque output. Built for maximum durability and long life with impact drivers. Black oxide finish resists corrosion and increases life of bit. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life.

 

Chenango Supply 316 x 1-34 Phillips Flat Head Concrete Screw Anchor 100 pieces With Drill Bit 316 x 1-34

Chenango Supply 3/16 x 1-3/4″ Phillips Flat Head Concrete Screw Anchor. 100 pieces With Drill Bit (3/16 x 1-3/4)

Chenango Supply 3/16 x 1-3/4″ Phillips Flat Head Concrete Screw Anchor. 100 pieces With Drill Bit (3/16 x 1-3/4) - . Included masonry drill bit is 5/32″ size. Concrete screws or “tapcons” are great for screwing into concrete. Used to anchor signs, fixtures to concrete and block buildings.

 

Hard-to-Find Fastener 014973161903 Phillips Flat Concrete Screws 316 x 1-14-Inch

Hard-to-Find Fastener 014973161903 Phillips Flat Concrete Screws, 3/16 x 1-1/4-Inch

Hard-to-Find Fastener 014973161903 Phillips Flat Concrete Screws, 3/16 x 1-1/4-Inch - We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. We also sell coated and stainless products for additional rust resistance. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish.

 

66200316 x 1-34 PFH 100pk Concrete Screws

(66200)3/16 x 1-3/4″ PFH 100pk Concrete Screws

(66200)3/16 x 1-3/4″ PFH 100pk Concrete Screws - Patented phillips ii with acr drive drive system. Acr3 bit and 5/32 drill bit included. Corrosion resistance, can be used in pt wood. Heads will not strip out-allows for more torque. Complete system.

 

500 pc 316x1-34 FLAT Concrete Screw

500 pc 3/16×1-3/4″ FLAT Concrete Screw

500 pc 3/16×1-3/4″ FLAT Concrete Screw - 5/32″ drill bit included. #3 phillips recess. Coating compatable with pressure treated lumber. #3 phillips bit included. High-low threads.

 

Chenango Supply 316 x 1-34 Hex Head Concrete Screw Anchor 100 pieces With Drill Bit 316 x 1-34

Chenango Supply 3/16 x 1-3/4″ Hex Head Concrete Screw Anchor. 100 pieces With Drill Bit (3/16 x 1-3/4)

Chenango Supply 3/16 x 1-3/4″ Hex Head Concrete Screw Anchor. 100 pieces With Drill Bit (3/16 x 1-3/4) - Cuts its own threads in concrete. These are commonly known as tapcons. 1000 hour salt spray test coating. 5/32 concrete screw drill bit included in box. Hex head uses 1/4 nut driver.

 

Bosch TC800 Concrete Screw Drill Bit Sleeve

Bosch TC800 Concrete Screw Drill Bit Sleeve

Bosch TC800 Concrete Screw Drill Bit Sleeve - Magnetic nut setters hold the screw in place, and keep the sleeve from being damaged, extending the life of the entire system. Bosch holds the tightest dimension to ensure low run out. Bosch not only has a rich heritage in concrete, but is the largest manufacturer of concrete drill bits in the world. Complete program including all sizes, the bit holder, the bit sleeve, and a complete anchoring system.

 

Chenango Supply 316 x 2-34 Hex Head Concrete Screw Anchor 100 pieces With Drill Bit 316 x 2-34

Chenango Supply 3/16 x 2-3/4″ Hex Head Concrete Screw Anchor. 100 pieces With Drill Bit (3/16 x 2-3/4)

Chenango Supply 3/16 x 2-3/4″ Hex Head Concrete Screw Anchor. 100 pieces With Drill Bit (3/16 x 2-3/4) - Hex head uses 1/4 nut driver. 5/32 concrete screw drill bit included in box. 1000 hour salt spray test coating. Cuts its own threads in concrete. These are commonly known as tapcons.

 

The Hillman Group 375297 Hex Washer Head Slotted Tapper Concrete Screw Anchor 14 x 3-14-Inch 100-Pack

The Hillman Group 375297 Hex Washer, Head Slotted Tapper Concrete Screw Anchor, 1/4 x 3-1/4-Inch, 100-Pack

The Hillman Group 375297 Hex Washer, Head Slotted Tapper Concrete Screw Anchor, 1/4 x 3-1/4-Inch, 100-Pack - State of the art thread design cuts into concrete. For light to medium duty applications. Tapper screws are designed for fastening applications in concrete, block and brick. Use tapper screws to attach electrical equipment, two by fours, downspout straps, hose reels, flag poles, hurricane shutters and more. Tapper screws are perfect for indoor and outdoor use. .

 

The Hillman Group 41555 Hex Washer Head Tapper Concrete Screw Anchor 316 X 2 14 20-Pack

The Hillman Group 41555 Hex Washer Head Tapper Concrete Screw Anchor 3/16 X 2 1/4 20-Pack

The Hillman Group 41555 Hex Washer Head Tapper Concrete Screw Anchor 3/16 X 2 1/4 20-Pack - Tapper screws are designed for fastening applications in concrete, block and brick. Use tapper screws to attach electrical equipment, two by fours, downspout straps, hose reels, flag poles, hurricane shutters and more. State of the art thread design cuts into concrete. Tapper screws are perfect for indoor and outdoor use. For light to medium duty applications.

 

Chenango Supply 14 x 2-34 Hex Head Concrete Screw Anchor 100 pieces With Drill Bit 14 x 2-34

Chenango Supply 1/4 x 2-3/4″ Hex Head Concrete Screw Anchor. 100 pieces With Drill Bit (1/4 x 2-3/4″)

Chenango Supply 1/4 x 2-3/4″ Hex Head Concrete Screw Anchor. 100 pieces With Drill Bit (1/4 x 2-3/4″) - Hex head uses 5/16 nut driver. 1000 hour salt spray test coating. 3/16 concrete screw drill bit included in box. Cuts its own threads in concrete. These are commonly known as tapcons.

 

Chenango Supply 14 x 4 Flat Head Concrete Screw Anchor 100 pieces With Drill Bit 14 x 4

Chenango Supply 1/4 x 4″ Flat Head Concrete Screw Anchor. 100 pieces With Drill Bit (1/4 x 4)

Chenango Supply 1/4 x 4″ Flat Head Concrete Screw Anchor. 100 pieces With Drill Bit (1/4 x 4) - . Concrete screws or “tapcons” are great for screwing into concrete. Included masonry drill bit is 3/16″ size. Used to anchor signs, fixtures to concrete and block buildings.

 

Bosch TC100 532-Inch by 3-12-Inch Concrete Screw Drill Bit

Bosch TC100 5/32-Inch by 3-1/2-Inch Concrete Screw Drill Bit

Bosch TC100 5/32-Inch by 3-1/2-Inch Concrete Screw Drill Bit - Bosch not only has a rich heritage in concrete, but is the largest manufacturer of concrete drill bits in the world. Magnetic nut setters hold the screw in place and keep the sleeve from being damaged, extending the life of the entire system. Complete program including all sizes, the bit holder, the bit sleeve and a complete anchoring system. Bosch holds the tightest dimension to ensure low run out.

 

12 x 5 Powers Wedge-Bolt Heavy Duty Concrete Screw Anchors Hex Head Carbon Steel Zinc Plated 25Bx

1/2″ x 5″, Powers Wedge-Bolt+ Heavy Duty Concrete Screw Anchors, Hex Head, Carbon Steel Zinc Plated, 25/Bx

1/2″ x 5″, Powers Wedge-Bolt+ Heavy Duty Concrete Screw Anchors, Hex Head, Carbon Steel Zinc Plated, 25/Bx - These are commonly known as tapcons. 1000 hour salt spray test coating. 3/16 concrete screw drill bit included in box. Cuts its own threads in concrete. Phillips flat head.

 

IRWIN Tools 1888627 Impact Performance Series Concrete Screw Drill-Drive Installation Set for 316-Inch Screws  4-Piece

IRWIN Tools 1888627 Impact Performance Series Concrete Screw Drill-Drive Installation Set for 3/16-Inch Screws, 4-Piece

IRWIN Tools 1888627 Impact Performance Series Concrete Screw Drill-Drive Installation Set for 3/16-Inch Screws, 4-Piece - One-piece construction withstands higher torque loads than standard quick-change bits. 1/4″ quick-change shank is designed to work with impact drivers, and reduces slipping in standard drill chucks. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. Built for maximum durability and long life with impact drivers. Black oxide finish resists corrosion and increases life of bit.

 

Chenango Supply 14 x 1-34 Flat Head Concrete Screw Anchor 100 pieces With Drill Bit 14 x 1-34

Chenango Supply 1/4 x 1-3/4″ Flat Head Concrete Screw Anchor. 100 pieces With Drill Bit (1/4 x 1-3/4)

Chenango Supply 1/4 x 1-3/4″ Flat Head Concrete Screw Anchor. 100 pieces With Drill Bit (1/4 x 1-3/4) - Included masonry drill bit is 3/16″ size. . Used to anchor signs, fixtures to concrete and block buildings. Concrete screws or “tapcons” are great for screwing into concrete.