18-8 Stainless Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type AB, 1/4″-14 Thread Size, 1″ Length (Pack of 10)
- Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. 18-8 stainless steel provides good corrosion resistance and strength, and the black oxide finish offers mild corrosion resistance and lubricity. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, 82 degrees Oval Head, Phillips Drive, Type A, #6-18 Thread Size, 1-1/2″ Length (Pack of 100)
- Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Oval head has a 82-degree cone shape for a flush fit in a countersunk hole and has a slightly rounded top that sits above the mated surface. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Button Head, Pin In Star Drive, Type AB, 1″ Length, #12 Threads, Made in US (Pack of 25)
- 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Button head has short vertical sides similar to a pan head screw but has a low-profile rounded head instead of a flat top. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Made in us. Pin-in-star drive resists tampering by requiring a special driver to tighten or loosen the screw using the six-pointed indentation with center pin.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type AB, #4-24 Thread Size, 1/4″ Length (Pack of 100)
- Truss head has an extra-wide low-profile domed shape for applications with minimal clearance. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type AB, #4-24 Thread Size, 1/2″ Length (Pack of 100)
- Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating.
18-8 Stainless Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type AB, #8-18 Thread Size, 1″ Length (Pack of 50)
- Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 18-8 stainless steel provides good corrosion resistance and strength, and the black oxide finish offers mild corrosion resistance and lubricity. Pan head has a flat top and short vertical sides with a rounded top edge. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type A, #10-12 Thread Size, 3/4″ Length (Pack of 50)
- Truss head has an extra-wide low-profile domed shape for applications with minimal clearance. Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, 82 degrees Oval Head, Phillips Drive, Type A, #8-15 Thread Size, 1″ Length (Pack of 100)
- 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Oval head has a 82-degree cone shape for a flush fit in a countersunk hole and has a slightly rounded top that sits above the mated surface. Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type AB, #10-16 Thread Size, 1″ Length (Pack of 25)
- Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Pan head has a flat top and short vertical sides with a rounded top edge. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.
18-8 Stainless Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type A, #8-15 Thread Size, 3/4″ Length (Pack of 50)
- Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge. Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. 18-8 stainless steel provides good corrosion resistance and strength, and the black oxide finish offers mild corrosion resistance and lubricity.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Hex Washer Head, Slotted Drive, Type AB, #6-20 Thread Size, 3/8″ Length (Pack of 100)
- 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Hex washer head has six flat sides that a wrench can grip from the side in low-profile applications and has a flange for additional bearing surface to distribute the force over the material being fastened. Slotted drive has a linear slot for use with a flat-blade driver.
18-8 Stainless Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type A, #8-15 Thread Size, 1/2″ Length (Pack of 50)
- Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 18-8 stainless steel provides good corrosion resistance and strength, and the black oxide finish offers mild corrosion resistance and lubricity. Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Undercut 82 degrees Flat Head, Phillips Drive, Type AB, #2-32 Thread Size, 1/4″ Length (Pack of 100)
- Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Undercut flat head has a flat top with a 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type AB, #6-20 Thread Size, 7/16″ Length (Pack of 100)
- Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type AB, #6-20 Thread Size, 3/8″ Length (Pack of 100)
- 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Star Drive, Type AB, #10-16 Thread Size, 1/2″ Length (Pack of 50)
- Pan head has a flat top and short vertical sides with a rounded top edge. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive.
18-8 Stainless Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type AB, #8-18 Thread Size, 3/4″ Length (Pack of 50)
- Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. 18-8 stainless steel provides good corrosion resistance and strength, and the black oxide finish offers mild corrosion resistance and lubricity. Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Star Drive, Type AB, #10-16 Thread Size, 3/4″ Length (Pack of 25)
- Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Pan head has a flat top and short vertical sides with a rounded top edge. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive.
18-8 Stainless Steel Sheet Metal Screw, Black Oxide Finish, 82 degrees Flat Head, Phillips Drive, Type A, #8-15 Thread Size, 3/4″ Length (Pack of 50)
- Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. 18-8 stainless steel provides good corrosion resistance and strength, and the black oxide finish offers mild corrosion resistance and lubricity. Flat head has an 82-degree cone shape for use in countersunk holes and a flat top that fits flush with the mated surface. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
