Top 19 for Best Plate Clamp

 

Vestil LPC-60 Positive Locking Plate Clamp 15 Length x 4 Width 6000 lb Capacity Blue

Vestil LPC-60 Positive Locking Plate Clamp, 15″ Length x 4″ Width, 6000 lb. Capacity, Blue

Vestil LPC-60 Positive Locking Plate Clamp, 15″ Length x 4″ Width, 6000 lb. Capacity, Blue - Not designed to use on stainless steel or aluminum plates. For use with materials with a surface hardness to 30 rc (300 hb). Forged head and gear. Serrated gripper is hardened tool steel. The positive locking plate clamp grips a sheet until release ring is pulled. Lift only one (1) clean, oil free plate at a time. Safety factor is 2 to 1.

 

Terrier 3 Ton Vertical Plate Clamp TSE WLL - 6600 lbs Jaw-Opening 0 - 138

Terrier 3 Ton Vertical Plate Clamp (TSE) WLL – 6,600 lbs. Jaw-Opening 0″ – 1.38″

Terrier 3 Ton Vertical Plate Clamp (TSE) WLL – 6,600 lbs. Jaw-Opening 0″ – 1.38″ - Model 3 tse. The ts/sts lifting clamps are equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered. For vertical lifting and transporting of steel plates and structures. The clamp is locked in closed as well as in open position. Jaw opening 0″ to 13/8″.

 

Vestil LPC-20 Positive Locking Plate Clamp 080 Thick Serrated Grip 2000 lbs Working Load Limit 175 Bale Opening 23 Throat Depth

Vestil LPC-20 Positive Locking Plate Clamp, 0.80″ Thick, Serrated Grip, 2000 lbs Working Load Limit, 1.75″ Bale Opening, 2.3″ Throat Depth

Vestil LPC-20 Positive Locking Plate Clamp, 0.80″ Thick, Serrated Grip, 2000 lbs Working Load Limit, 1.75″ Bale Opening, 2.3″ Throat Depth - Grips sheet until release ring is pulled. Do not use plate clamps to lift loads less than 20 percent of rated capacity. Forged head and gear. 20 standards. 400 lbs plate weight. Safety factor is 2 to 1. Lift only one plate at a time. Plate must be clean and free of oil. Not designed to use on stainless steel or aluminum plates. Designed to meet asme b30. For use with materials with a surface hardness to 30 rc (300 hb). Serrated gripper is hardened tool steel. Power coated finish.

 

CR LAURENCE EH09 CRL Brushed Nickel Face Plate Clamp for 14 to 516 Glass

C.R. LAURENCE EH09 CRL Brushed Nickel Face Plate Clamp for 1/4″ to 5/16″ Glass

C.R. LAURENCE EH09 CRL Brushed Nickel Face Plate Clamp for 1/4″ to 5/16″ Glass - Laurence eh09 crl brushed nickel face plate clamp for 1/4″ to 5/16″ glass. One clamp per pack. The clamp has a removable face plate secured with two screws and a gasket for 5/16″ (8 mm) glass is supplied. Crl low profile face plate glass clamps are perfect for flush glazing, connecting panels for railing systems, or attaching shelves to walls. R. Drawings and templates are available. Part numbers variations eh09. C. 820 tuff-pak tape. No. For use with 1/4″ (6 mm) glass we recommend cat.

 

CR LAURENCE EH12 CRL Chrome Face Plate Clamp for 14 to 38 Glass by CR Laurence

C.R. LAURENCE EH12 CRL Chrome Face Plate Clamp for 1/4 to 3/8 Glass by C.R. Laurence

C.R. LAURENCE EH12 CRL Chrome Face Plate Clamp for 1/4 to 3/8 Glass by C.R. Laurence - Gasket is supplied for 3/8″ (10 mm) glass. For use with 1/4″ (6 mm) glass we recommend crl cat. Part numbers variations eh12. Universal in design, the clamp has a removable face plate secured with two screws. C. Crl light glass face plate clamps are one of our most popular sellers. Laurence eh12 crl chrome face plate clamp for 1/4″ to 3/8″ glass. 820 tuff-pak tape. R. No. Drawings and templates are available. One clamp per pack.

 

Vertical Plate Lifting Clamp With Lock Hoist Hook Chain Lifter Machine 3Ton

Vertical Plate Lifting Clamp With Lock Hoist Hook Chain Lifter Machine 3Ton

Vertical Plate Lifting Clamp With Lock Hoist Hook Chain Lifter Machine 3Ton - Feature â–ªthis clamp is made of high-quality alloy steel.   â–ªOverload is forbidden. These lifting clamps include a pivoting bail for versatile, smooth operation and automatic serrated hardened steel pads and cams. It is made from low-carbon high-quality alloy steel featuring high strength, corrosion resistant and high temperature resistant. Notetwo colors, random delivery item included(170440) 1 pc vertical plate lifting clamp. â–ªThe clamp can only lift one piece of plate at one time. Vertical plate clamp is used to vertically lift plate material.

 

CR LAURENCE EH17 CRL Brass Face Plate Clamp for 38 to 12 Glass

C.R. LAURENCE EH17 CRL Brass Face Plate Clamp for 3/8″ to 1/2″ Glass

C.R. LAURENCE EH17 CRL Brass Face Plate Clamp for 3/8″ to 1/2″ Glass - No. Color brassheight 1-31/32″ (50 mm)width 1-9/16″ (39. 820 tuff-pak tape. For use with 3/8″ (10 mm) glass we recommend crl cat. . One of our most popular sellers for flush glazing, or attaching shelves to walls, this clamp has a removable face plate secured with two screws. One clamp per pack. 6 mm)ideal for flush glazingfor 3/8″ to 1/2″ (10 to 12 mm) glasssolid brasscrl heavy glass face plate clamps are universal in design and solve many glass mounting problems. A gasket is supplied for 1/2″ (12 mm) glass. Important notesnot appropriate for glass railing applications.

 

Vestil EPC-80 Vertical Plate Clamp 119 Plate Thickness 6600 lbs Working Load Limit 238 Bale Opening

Vestil EPC-80 Vertical Plate Clamp, 1.19″ Plate Thickness, 6600 lbs Working Load Limit, 2.38″ Bale Opening

Vestil EPC-80 Vertical Plate Clamp, 1.19″ Plate Thickness, 6600 lbs Working Load Limit, 2.38″ Bale Opening - Drop-forged steel case for maximum strength. Pivoting bale for easier and more versatile operation. 20. 3″ throat depth. 1320 lbs minimum plate weight. Not designed to use on stainless steel or aluminum plates. Automatic serrated hardened steel cams and pads. Serious bodily injury or property damage may result. For use with materials with a surface hardness to 30 rc (300 hb). Designed to meet asme b30. Warning do not exceed the working load limit.

 

AUTOTOOLHOME Suction Plate Vise Holder Bench Adjustable Clamp Rubber Suction Base for Dremel

AUTOTOOLHOME Suction Plate Vise Holder Bench Adjustable Clamp Rubber Suction Base for Dremel

AUTOTOOLHOME Suction Plate Vise Holder Bench Adjustable Clamp Rubber Suction Base for Dremel - Made of aluminum material, durable for use. Ideal for hobby use around the home or take it anywhere. The vise has a powerful suction mechanism that securely attaches on tiles, glass, marble and other smooth surface, adjustable and convenient to use. A great handy tool to fix the circuit board for electric maintenance. The swivel-head can be positioned in just about any configuration and locks in place with a high torque lock-ring.

 

i-Lift Equipment ICDH1 Vertical Plate Clamp with Lock Handle 2200 lb Working Load Limit

i-Lift Equipment ICDH1 Vertical Plate Clamp with Lock Handle, 2200 lb Working Load Limit

i-Lift Equipment ICDH1 Vertical Plate Clamp with Lock Handle, 2200 lb Working Load Limit - Lock for both closed and open positions of the clamp. Standard design clamp for vertical lifting of steel plates and structures. Manufactured with high quality carbon steel. Safety mechanism on clamps ensuring clamp does not slip. High-frequency quenching of die-forged special alloy steel offers greater durability.

 

Terrier 6 Ton Universal Vertical Plate Clamp TSU WLL - 13200 LBS Jaw Opening 0-126

Terrier 6 Ton Universal Vertical Plate Clamp (TSU) WLL – 13,200 LBS Jaw Opening 0-1.26″

Terrier 6 Ton Universal Vertical Plate Clamp (TSU) WLL – 13,200 LBS Jaw Opening 0-1.26″ - The clamp is locked in closed as well as in open position. For lifting and transporting of steel plates and structures from all positions (horizontal, vertical, and sidelong). Articulated lifting shackle. Jaw opening 0″ to 11/4″. Model 6 tsu.

 

Vestil EPC-20 Vertical Plate Clamp 075 Plate Thickness 2000 lbs Working Load Limit 238 Bale Opening

Vestil EPC-20 Vertical Plate Clamp, 0.75″ Plate Thickness, 2000 lbs Working Load Limit, 2.38″ Bale Opening

Vestil EPC-20 Vertical Plate Clamp, 0.75″ Plate Thickness, 2000 lbs Working Load Limit, 2.38″ Bale Opening - Not designed to use on stainless steel or aluminum plates. 20. Warning do not exceed the working load limit. 9″ throat depth. 2. Designed to meet asme b30. 400 lbs minimum plate weight. Drop-forged steel case for maximum strength. Serious bodily injury or property damage may result. Automatic serrated hardened steel cams and pads. For use with materials with a surface hardness to 30 rc (300 hb). Pivoting bale for easier and more versatile operation.

 

Vestil CPC-40 Heavy Duty Steel Vertical Plate Clamps with Chain 1 Plate Thickness 4000 lbs Working Load Limit minimum plate weight 800 lbs 375 Bale Opening 3 Throat Depth

Vestil CPC-40 Heavy Duty Steel Vertical Plate Clamps with Chain, 1″ Plate Thickness, 4000 lbs Working Load Limit (minimum plate weight 800 lbs), 3.75″ Bale Opening, 3″ Throat Depth

Vestil CPC-40 Heavy Duty Steel Vertical Plate Clamps with Chain, 1″ Plate Thickness, 4000 lbs Working Load Limit (minimum plate weight 800 lbs), 3.75″ Bale Opening, 3″ Throat Depth - Lifting eye includes chain for greater versatility. For use with materials with a surface hardness to 30 rc (300 hb). Lift only one plate at a time. Plate must be clean and free of oil. Not designed to use on stainless steel or aluminum plates. . Meets asme b30. 800 pounds minimum uniform plate weight. Designed for lifting plate material in a vertical position. Do not use plate clamps to lift loads less than 20 percent of rated capacity. Heavy-duty steel construction for years of reliable use. 20 specifications.

 

CR LAURENCE EH15 CRL Brushed Nickel Face Plate Clamp for 38 to 12 Glass

C.R. LAURENCE EH15 CRL Brushed Nickel Face Plate Clamp for 3/8″ to 1/2″ Glass

C.R. LAURENCE EH15 CRL Brushed Nickel Face Plate Clamp for 3/8″ to 1/2″ Glass - Ideal for flush glazing for 3/8″ to 1/2″ (10 to 12 mm) glass crl heavy glass face plate clamps are universal in design and solve many glass mounting problems. 6 mm) height 1-31/32 in (50 mm) minimum order 1 package additional product information one clamp per pack. For use with 3/8 inch (10 millimeter) glass we recommend crl cat. 820 tuff-pak tape. No. One of our most popular sellers for flush glazing, connecting panels for railing systems, or attaching shelves to walls, this clamp has a removable face plate secured with two screws. Clamps are designed to solve glass mounting problems such as flush glazing, connecting panels for railing systems or attaching shelves to walls. A gasket is supplied for 1/2 inch (12 millimeter) glass. Color brushed nickel width 1-9/16 in (39.

 

CR LAURENCE EH15 CRL Brushed Nickel Face Plate Clamp for 38 to 12 Glass by CR Laurence

C.R. LAURENCE EH15 CRL Brushed Nickel Face Plate Clamp for 3/8″ to 1/2″ Glass by C.R. Laurence

C.R. LAURENCE EH15 CRL Brushed Nickel Face Plate Clamp for 3/8″ to 1/2″ Glass by C.R. Laurence - 180° turning range for easy positioning or transfer of plates. For use with materials having surface hardness < hbc 39. Cr laurence eh15 crl brushed nickel face plate clamp for 3/8 to 1/2 glass. Individually serialized and tested to 2 x wll. Lever insures pre-tensioning and release of grip jaws.

 

Vestil HPC-40 Horizontal Plate Lifting Clamp Steel 1-14 Plate Thickness 4000 lbs Working Load Limit 12 Bale Opening

Vestil HPC-40 Horizontal Plate Lifting Clamp, Steel, 1-1/4″ Plate Thickness, 4000 lbs Working Load Limit, 1.2″ Bale Opening

Vestil HPC-40 Horizontal Plate Lifting Clamp, Steel, 1-1/4″ Plate Thickness, 4000 lbs Working Load Limit, 1.2″ Bale Opening - Meets asme b30. 800 pounds min uniform plate weight. 20 specifications. Designed for lifting plate material in horizontal position. Do not use plate clamps to lift loads less than 20 percent of rated capacity. Lift only one plate at a time. Plate must be clean and free of oil. Heavy-duty steel construction for years of reliable use. For use with materials with a surface hardness to 30 rc (300 hb). Not designed to use on stainless steel or aluminum plates.

 

Gampak Nail Plate Clamp SP-50

Gampak Nail Plate Clamp SP-50

Gampak Nail Plate Clamp SP-50 - Body of clamp is welded construction. The cam handle is ergonomically designed with a flat surface to allow for ease of operation while wearing protective gloves. Can be used to lift a plate from the horizontal to vertical position and vice versa through 180º. Clamp jaws and pads are manufactured from high-tensile steel. Fitted with a hold open and lock closed lever.

 

All Material Handling PCUA010 Universal Plate Lifting Clamp 1 Tons 34 Plate Thickness

All Material Handling PCUA010 Universal Plate Lifting Clamp, 1 Tons, 3/4″ Plate Thickness

All Material Handling PCUA010 Universal Plate Lifting Clamp, 1 Tons, 3/4″ Plate Thickness - Individually serialized and tested to 2 x wll. All steel body for durable strength in a smaller size. For use with materials having surface hardness < hbc 38. Lever insures pre-tensioning and release of grip jaws. 180° turning range for easy positioning or transfer of plates.

 

Vestil EPC-40 Vertical Plate Clamp 1 Plate Thickness 4000 lbs Working Load Limit 238 Bale Opening

Vestil EPC-40 Vertical Plate Clamp, 1″ Plate Thickness, 4000 lbs Working Load Limit, 2.38″ Bale Opening

Vestil EPC-40 Vertical Plate Clamp, 1″ Plate Thickness, 4000 lbs Working Load Limit, 2.38″ Bale Opening - Designed to meet asme b30. 20. Pivoting bale for easier and more versatile operation. Automatic serrated hardened steel cams and pads. Not designed to use on stainless steel or aluminum plates. Warning do not exceed the working load limit. For use with materials with a surface hardness to 30 rc (300 hb). Drop-forged steel case for maximum strength. 800 lbs minimum plate weight. 2. 9″ throat depth. Serious bodily injury or property damage may result.