Top 19 Beam Clamps for 2020

 

Bessey T27965-48″ I-Beam Clamp - Push beam trolley comes with multiple spacer washers make beam flange width adjustment quick and easy. Price for each. I/2 ton trolley hardened wheels with lubricated for life, double sealed ball bearings. Plain trolley weight capacity 1/2 ton (1000 lbs). Manual trolley is rugged steel side plates feature built-in bumper guards.

 

Morris Products 17476 Support Beam Clamp, Mallable, Iron, 1/2″-13 Rod Size, 1/2″-13 Set Screw Size, 750 lbs Max Load - Used with conduit hangers, bridle rings & drop rods 1/4″ up to 1/2″. Tapped for rods, bottom and back on all sizes. Malleable iron zinc plated. Mallable iron rod support beam clamp, strong, durable rod support beam clamp.

 

Harrington UBC0100 UBC Universal Beam Clamp, 6″ – 13.25″ Holding Size, 1.75″ Maximum Beam Flange Thick, 10 ton Capacity - Jaw opening adjusts for a wide range of tapered or flat-flanged beams. Overhead lifting and vertical rigging operations holding and positioning beams for construction. Optional ubc suspender for perpendicular mounting and for oversized hooks. Lock nut feature resists loosening to improve secure clamping built-in suspension pin for low headroom. Lightweight portable design left-hand and right-hand clamp screw allows for quick clamping and unclamping.

 

Empire Industries JR Top Beam Clamp 3/8″ – Lot of 75 - Jr top beam clamp 3/8″junior top beam clamp, designed to attach hanger rod to the top flange of a beam or bar joist where flange thickness does not exceed 5/8 of an inch.

 

B-LINE BC1 BEAM CLAMP THRU 1/2″ 100BX - Screw ground wire into this i-beam clamp then clamp onto ground rod, ground rod is inserted into the ground to release electricity in case of lightning strike, 20 pcs per order. 35″-125″ beam size. Solid steel construction. Adjustable locking screw mechanism lets you quickly change the width for quick interchange from one gantry to another.

 

Thomas & Betts SS U501 BEAM CLAMP -STEEL (Pack of 20) - Steel beam clamp with goldgalv finish. For use with a-1200, b-1200, c-1200, a-1400, b-1400 & b-1402 series channels.

 

Bessey IBEAM36 Heavy Duty IBEAM Clamp, Red/Silver/Black, 36″ - Heavy duty steel i beam clamping rail, zinc plated. Castings are powder coated and feature flat surfaces on the bottom so that the clamps will stand on work surfaces. Acme threaded 9/16″ steel spindle, cast iron clamping jaw faces are 1 3/4″ width x 2″ height. Heavy duty crank style handle. Cast iron moveable jaw with steel clutch plates.

 

Morris 91715 Morris Products 91715 I Beam Ground Clamp, Isolated From Beam, #8 – #4 Wire Range - Maximum strength offering maximum strength and conductivity, this i-beam ground clamp features a lay-in feature for use with continuous grounding loops and wire ranges of 4/8, 2/0-4 and 2/0-250. Necessarty electrical tool this i-beam ground clamp offers a solution for connecting ground conductors to i-beams or other metal framing utilize for commercial, industrial, agricultural or residential applications. Safety approved each ground clamp isolated from beam is culus listed ul 467 listed for direct burial, bonding and grounding applications in concrete and soil. High-quality construction this ground clamp is made from high-strength, high-conductivity copper alloy for durability and includes stainless steel nuts, bolts and lock washers. Collection of comprehensive electrical tools morris products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers.

 

Reversible Beam Clamp With 1-3/8 Inch Jaw Opening And 3/4-10 Threaded Holes-5 per case - Garvin industries¡¯ through hole style in their beam clamps allow drop rod length adjustment. Additionally, clamps come in both short and wide jaw openings for various beam flange thickness. Their hardened cup point set screws come with jam nuts to prevent vibratory loosening in industrial settings. Reversible beam clamps with 1-3/8 inch jaw opening and 3/4-10 threaded holes are used when 3/4-10 drop rod length needs to be adjusted to accommodate the field installation finished height.

 

Morris 17462 Strut to Beam Clamp with Square U-Bolt, 13/16″ – 1-5/8″ Channel - Strut to beam clamp with square u-bolt for 13/16″ and 1-5/8″ channel, a strut-to-beam clamp with a small channel. Strut-to-beam clamp features zinc electroplate finish. Strut-to-beam clamp for small 13/16” & 1-5/8” channel. Design load 1200lbs when used in pairs.

 

Harrington UBC030 UBC Universal Beam Clamp, 4″ – 12″ Holding Size, 1″ Maximum Beam Flange Thick, 3 ton Capacity - Optional ubc suspender for perpendicular mounting and for oversized hooks. Lock nut feature resists loosening to improve secure clamping built-in suspension pin for low headroom. Overhead lifting and vertical rigging operations holding and positioning beams for construction. Jaw opening adjusts for a wide range of tapered or flat-flanged beams. Lightweight portable design left-hand and right-hand clamp screw allows for quick clamping and unclamping.

 

Tractel CC07029 Beam Clamp, 6000 lb. Capacity, 13-1/4″ - These beam clamps are for manual and electric hoists, anchor points, or lifting clamps. Adding ingenuity to practical sense, tractel also offers the adjustable corso beam clamp to complement your tralift and bravo applications. Featuring compact and sturdy construction, these clamps offer simple and fast adjustments on “i” beams.

 

Panduit JP75SBC50-L20 J-Pro Cable Support System Screw-On Beam Clamp (50-Pack) - Durable non-metallic j hook materials provide the ability to manage and support a large number of cables. Complete horizontal and vertical 1″ bend radius control helps prevent degradation of cable performance. Cable tie channel allows user to easily install 3/4″ tak-ty cable ties to retain cable bundle. Wide cable support base prevents pinch points that could cause damage to cables. Pre-riveted assemblies allow for attachment to ceilings, beams, threaded rods, drop wires and under floor supports to meet requirements of a variety of applications.

 

Beam Clamp 4, Standard, Carbon Steel, 3/8In - Price for each bolt size (in) 3/8 standards a-a-1192a (type 21), ww-h-171-e (type 21), ansi/mss sp-69, and ansi/mss sp-58 (type 21) ul listed when used with 3/8″ and 1/2″ rod finish galvanized metal detectable yes description/special features clamp center load on beam to prevent distortion max load (lb) 1000 material carbon steel item beam clamp type standard duty. Width (in) 4 beam width 4″ country of origin (subject to change) united states.

 

ICS Industries – 3/8″ ROD BEAM CLAMP (3/4″ MAX OPENING) 25 PACK - Finish black. This rod beam clamp is designed to clamp onto a steel i beam and is used in conjunction with threaded rod the clamp has a threaded hole to accept a piece of 3/8 threaded rod allowing various types of pipe hangers to be threaded on to the opposite end of the rod. Used in conjunction with a wide variety of pipe hangers. Material malleable iron.

 

One (1) Pair BESSEY 48″ Heavy-Duty IBeam Bar Clamps for Woodworking - Steel, nickel-plated ibeam design provides exceptional strength over large distances without bending or twisting. All lengths of bessey ibeam clamps provide up to 7000 lbs of clamping force and include the following standard specifications 2″ throat depth 1-3/4″ jaw width 1-3/8″ bar width and 7/16″ bar thickness. One (1) pair of ibeam48 clamps that provide 48″ of clamping width. Cast iron sliding clamp jaw contains 5 clutch plates that allow it to move smoothly along the rail, while still holding its position under pressure. Fixed end jaw has a 3/4″ acme-threaded screw and large, easy-to-grip handle for quickly setting the clamp jaws while providing control over the pressure being applied.

 

JET 252710 JBC-1 1-Ton Capacity Beam Clamp - Depth and breadth of line -jet offers a full range of machines to fill all your shop needs. Industry leading warranty, your jet equipped shop is backed by one of the industry’s most comprehensive warranties. Professional manuals, jet manuals are professionally written by engineers for ease of use. Innovative products, jet is committed to ongoing innovation demonstrated in the introduction of new products. Quality, reliable, quality engineering and manufacturing goes into each and every jet machine.

 

3/8″ Plain Jr Top Beam Clamp – 100 Box - They are often tapped on the underside and the back to accommodate a variety of threaded rod widths diameters, either vertically or horizontally. The top beam clamp is designed to suspend a threaded rod from the top flange of a beam or bar.

 

Beam Clamp 5, Carbon Steel, Standard, 3/8In - Price for each bolt size (in) 3/8 standards a-a-1192a (type 21), ww-h-171-e (type 21), ansi/mss sp-69, and ansi/mss sp-58 (type 21) ul listed when used with 3/8″ and 1/2″ rod finish galvanized metal detectable yes description/special features clamp center load on beam to prevent distortion max load (lb) 1000 material carbon steel item beam clamp type standard duty. Width (in) 5 beam width 5″ country of origin (subject to change) united states.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.