Top 16 Metal Screws

 

Qualihome Pan head Phillips Drive Sheet Metal Screws Assortment Kit 140 Pieces

Qualihome Pan head Phillips Drive Sheet Metal Screws Assortment Kit, 140 Pieces

Qualihome Pan head Phillips Drive Sheet Metal Screws Assortment Kit, 140 Pieces - Comes in a handy plastic organized case with size compartments for easy storage. A large assortment 9 of the most-used sizes is provided to suit your needs, ideal for home, office, work, garage, business & industrial applications. These sheet metal screws / tapping screws, are highly versatile and are used to attached metal, wood, fiberglass, and plastic. Sheet metal screws are fully threaded with a sharp point. Made from hardened steel, the threads create their own mating thread in pre-drilled holes.

 

6 X 12 Stainless Phillips Flat Head Sheetmetal Screw 12 to 2 in Listing 100 Sheet Metal Screws 82 Degrees 6 x 12

#6 X 1/2″ Stainless Phillips Flat Head Sheetmetal Screw (1/2″ to 2″ in Listing) 100 Sheet Metal Screws, 82 Degrees (#6 x 1/2″)

#6 X 1/2″ Stainless Phillips Flat Head Sheetmetal Screw (1/2″ to 2″ in Listing) 100 Sheet Metal Screws, 82 Degrees (#6 x 1/2″) - Flat heads sink into the material they are screwed into so that the head is flush. Phillips drives are x shaped for a phillips screw driver. Sheet metal screws have large threads for use in sheet metal sometimes also used in plastic, fiberglass, or wood.

 

Phillips Flat Head Sheet Metal Screws 18-8 Stainless Steel - 4 x 12 Qty-1000

Phillips Flat Head Sheet Metal Screws 18-8 Stainless Steel – #4 x 1/2″ Qty-1,000

Phillips Flat Head Sheet Metal Screws 18-8 Stainless Steel – #4 x 1/2″ Qty-1,000 - Sheet metal screws have sharp cutting threads that cut into sheet metal, plastic or wood they are sometimes notched (type-17 point) at the tip to aid in chip removal during thread cutting the shanks are threaded up to the head or to the undercut. These screws come in many types of heads, pan, flat, truss, oval, etc sheet metal screws make excellent fasteners for attaching metal hardware to wood because the fully threaded shank provides good retention in wood.

 

The Hillman Group 70908 8 X 1-14-Inch Stainless Steel Pan Head Square Drive Sheet Metal Screw 100-Pack

The Hillman Group 70908 8 X 1-1/4-Inch Stainless Steel Pan Head Square Drive Sheet Metal Screw, 100-Pack

The Hillman Group 70908 8 X 1-1/4-Inch Stainless Steel Pan Head Square Drive Sheet Metal Screw, 100-Pack - The sharp threads draw material together and ensure a secure hold. These sheet metal screws, or tapping screws, are highly versatile and are used to attached metal, wood, fiberglass and plastic. Sheet metal screws are fully threaded with a sharp point.

 

The Hillman Group 70913 10 X 1-Inch Stainless Steel Pan Head Square Drive Sheet Metal Screw 100-Pack

The Hillman Group 70913 10 X 1-Inch Stainless Steel Pan Head Square Drive Sheet Metal Screw, 100-Pack

The Hillman Group 70913 10 X 1-Inch Stainless Steel Pan Head Square Drive Sheet Metal Screw, 100-Pack - Sheet metal screws are fully threaded with a sharp point. These sheet metal screws, or tapping screws, are highly versatile and are used to attached metal, wood, fiberglass and plastic. The sharp threads draw material together and ensure a secure hold.

 

EC Kraus 38Mm Metal Screw Caps 50

E.C. Kraus 38Mm Metal Screw Caps (50)

E.C. Kraus 38Mm Metal Screw Caps (50) - Has a coated liner. . This size fits small-mouth, glass gallon and half-gallon jugs.

 

Bonayuanda 50pcs Nickel Plated Metal Screw-In Ceiling Hooks Cup Hooks Silver

Bonayuanda 50pcs Nickel Plated Metal Screw-In Ceiling Hooks Cup Hooks (Silver)

Bonayuanda 50pcs Nickel Plated Metal Screw-In Ceiling Hooks Cup Hooks (Silver) - Nickel plated metal material. Pack of 50. 1-1/4″ cup hooks/ ceiling hooks. Easy installation. Total length 45mm open mouth 14mm screw length 14mm.

 

14 X 34 Stainless Phillips Pan Head Sheetmetal Screw 12 to 2-12 in Listing 50 Sheet Metal Screws 14 X 34

#14 X 3/4″ Stainless Phillips Pan Head Sheetmetal Screw (1/2″ to 2-1/2″ in Listing) 50 Sheet Metal Screws (#14 X 3/4″)

#14 X 3/4″ Stainless Phillips Pan Head Sheetmetal Screw (1/2″ to 2-1/2″ in Listing) 50 Sheet Metal Screws (#14 X 3/4″) - Phillips drives are x shaped for a phillips screw driver. . Pan heads are slightly rounded with short vertical sides. Sheet metal screws have large threads for use in sheet metal sometimes also used in plastic, fiberglass, or wood.

 

Stainless Steel Phillips Pan Sheet Metal Screw Assortment Kit

Stainless Steel Phillips Pan Sheet Metal Screw Assortment Kit

Stainless Steel Phillips Pan Sheet Metal Screw Assortment Kit - This is a quality stainless steel phillips pan sheet metal screw assortment kit that includes the most popular sizes. This kit contains 25pcs #6 x 3/8, 25pcs #6 x 1/2, 25pcs #6 x 3/4, 25pcs #6 x 1, 25pcs #8 x 3/8, 25pcs #8 x 1/2, 25pcs #8 x 3/4, 25pcs #8 x 1, 25pcs #10 x 1/2, 15pcs #10 x 3/4, 15pcs #10 x 1, 15pcs #10 x 1-1/2, 1pc tuff storage container.

 

2 x 14 Pan Head Sheet Metal Screws Full Thread Phillips Drive Stainless Steel 18-8 Bright Finish Self-Tapping Quantity 100 Pieces

#2 x 1/4″ Pan Head Sheet Metal Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Bright Finish, Self-Tapping, Quantity 100 Pieces

#2 x 1/4″ Pan Head Sheet Metal Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Bright Finish, Self-Tapping, Quantity 100 Pieces - Phillips drive is x-shaped for installation with a phillip screw driver. The design is often criticized for its tendency to cam out at lower torque levels than other “cross head” designs. There has long been a popular belief that this was actually a deliberate feature of the design, for the purpose of assembling aluminum aircraft without over tightening the fasteners. Tapping screws are considered externally threaded fasteners that “tap” their own mating threads in metallic and non-metallic (such as plastic) materials. Pan heads are slightly rounded with short vertical sides. Sheet metal screws have sharp threads that cut into materials such as plastic plexi glass wood and of course sheet metal sheet metal screws are also the go to fasteners for use with plastic wall anchors in drywall. Tapping screws, especially type a, are referred to as “sheet metal screws” because one of their first applications was in ventilation ducts made of sheet metal. They also make excellent fasteners for attaching metal hardware to wood because the fully threaded shank provides good retention in wood. A pan head provides a low large diameter head, but with characteristically high outer edge along the outer periphery of the head where driving action is most effective for high tightening torques.

 

Steel Sheet Metal Screw Black Oxide Finish  Pan Head Phillips Drive Type A 10-12 Thread Size 1 Length Pack of 100

Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type A, #10-12 Thread Size, 1″ Length (Pack of 100)

Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type A, #10-12 Thread Size, 1″ Length (Pack of 100) - Steel is often used in applications where strength is the primary consideration, and the black oxide finish offers mild corrosion resistance and lubricity. Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

140-Pack Sheet Metal Screws Assortment Kit Pan Head Phillips Drives Deep Thread Screws Zinc Plated High Value 9 Common Sizes

140-Pack Sheet Metal Screws Assortment Kit, Pan Head, Phillips Drives, Deep Thread Screws, Zinc Plated, High Value, 9 Common Sizes.

140-Pack Sheet Metal Screws Assortment Kit, Pan Head, Phillips Drives, Deep Thread Screws, Zinc Plated, High Value, 9 Common Sizes. - Great kit for home or workplace, comes in a handy plastic container fits neatly in kitchen and office drawers, hardware and craft cabinet. Enjoy a variety of screws and sizes to suit your needs for different projects, high value combo pack 9 different parts 140 pieces. These screws have a smooth shank that allows the screw attaching items to hard or soft woods, or to pull the two pieces of wood together for a tight joint and prevent the wood from splitting. Handy wood screw assortment of commonly used sizes, pan head, with phillips drive, steel construction brass and zinc plated.

 

10 x 12 Stainless Phillips Pan Head Sheetmetal Screw 12 to 2 lengths in Listing 100 Sheet Metal Screws 10 x 12 inch

#10 x 1/2″ Stainless Phillips Pan Head Sheetmetal Screw (1/2″ to 2″ lengths in Listing) 100 Sheet Metal Screws (#10 x 1/2 inch)

#10 x 1/2″ Stainless Phillips Pan Head Sheetmetal Screw (1/2″ to 2″ lengths in Listing) 100 Sheet Metal Screws (#10 x 1/2 inch) - Pan heads are slightly rounded with short vertical sides. Phillips drives are x shaped for a phillips screw driver. Sheet metal screws have large threads for use in sheet metal sometimes also used in plastic, fiberglass, or wood.

 

550 Piece Sheet Metal Screw Assortment

550 Piece Sheet Metal Screw Assortment

550 Piece Sheet Metal Screw Assortment - Enjoy a variety of screws and sizes to suit your needs for different projects, high value combo pack 9 different parts 140 pieces. 550 piece sheet metal screw assortment. Great kit for home or workplace, comes in a handy plastic container fits neatly in kitchen and office drawers, hardware and craft cabinet. These screws have a smooth shank that allows the screw attaching items to hard or soft woods, or to pull the two pieces of wood together for a tight joint and prevent the wood from splitting.

 

10 x 34 Truss Head Sheet Metal Screws Full Thread Phillips Drive Stainless Steel 18-8 Bright Finish Self-Tapping Quantity 100 Pieces

#10 x 3/4″ Truss Head Sheet Metal Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Bright Finish, Self-Tapping, Quantity 100 Pieces

#10 x 3/4″ Truss Head Sheet Metal Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Bright Finish, Self-Tapping, Quantity 100 Pieces - A truss head screw has a head with flat underside and a slightly domed top. Manufactured from metal. Sheet metal screws have deep spiral threads the entire length and with a pointed end. Can be rotated into or out of the object using a screwdriver. Holds well in wood, plastic, and fiberglass. It has almost no exposed edge. Holds thin metal sheets together.

 

8 x 12 Oval Head Sheet Metal Screws Phillips Drive Stainless Steel 18-8 Full Thread Bright Finish Self-tapping Quantity 100

#8 x 1/2″ Oval Head Sheet Metal Screws, Phillips Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Self-tapping, Quantity 100

#8 x 1/2″ Oval Head Sheet Metal Screws, Phillips Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Self-tapping, Quantity 100 - They also make excellent fasteners for attaching metal hardware to wood because the fully threaded shank provides good retention in wood. . Oval heads are countersunk (cone shaped under the head) with a rounded top. Phillips drive is x-shaped for installation with a phillips screw driver. Sheet metal screws have sharp threads that cut into a material such as sheet metal, plastic or wood.