Amana Tool 47108 Flush Trim with Ball Bearing Guide 1/2-Inch Diameter by 1-Inch Cutting Height by 1/2-Inch Shank Carbide Tipped Router Bit
- Excellent for template work. 1/2-inch shank, 2 flute. 1/2-inch cutting diameter. 1-inch cutting height, 3-1/4-inch length. Carbide tipped, industrial quality.
Amana Tool RC-2248 CNC Spoilboard Surfacing & Rabbeting Flycutter 1-1/2 Dia x 15/32 (12mm) Cut Heigh
- 1/4 inch shank. 1/2-inch cutting diameter. 1/4-inch cutting height. Carbide tipped, industrial quality. 1/4-inch shank, 2 flute.
Amana Tool 45448 Straight Plunge 1-Inch Diameter by 1-1/4-Inch Cutting Height by 1/2-Inch Shank Solid Carbide Router Bit
- Carbide tipped, industrial quality. 1/2-inch shank, 2 flute. 1-1/4-inch cutting height, 2-7/8-inch length. 1-inch cutting diameter. New superior geometric design for super clean cuts.
Amana Tool 55202 Carbide Tipped Countersink #6 Screw 3/8 D x 1/8 Drill D x 5/16 Round SHK
- 82 degree carbide tipped countersinks with round shank.
Amana Tool 45783 Carving Liner Single Flute Solid Carbide Router Bit, 1/4-Inch Shank
- Solid carbide, industrial quality. Cutting diameter 1/4-inch, 5/8-inch cutting height. 18-degree angle. 1/4-inch shank, single flute.
Amana Tool 51200 Panel Pilot Flush 1/4-Inch Diameter x 1/4-Inch Cutting Height x 1/4-Inch Shank 1-Flute Solid Carbide Router Bit
- Solid carbide and integral pilot (no bearing to maintain) extend life of router bit, slim configuration reduces vibration. Amana 51200 specifications diameter 1/4″ carbide height 1/4″ shank 1/4″ length 1-1/2″ type of cut flushamana 51200 features here’s the ideal laminate trimming router bit for high volume production. Suitable for routers and trimmers.
Amana Tool 45427 Straight Plunge 1/2-Inch Diameter by 2-1/2-Inch Cutting Height by 1/2-Inch Shank Router Bit
- New superior geometric design for super-clean cuts. Cost effective. A-max industrial quality, carbide tipped for extended life. 200% longer lifetime. 1/2-inch diameter, 2-1/2-inch cutting height, 1/2-inch shank.
Amana Tool 55227 Carbide Tipped Countersink with No Burning and No Marring Adjustable Depth Stop wit
- Cutting diameter 1/4-inch. Carbide tipped. Carbide tipped, industrial quality. 1/4-inch cutting height. 1/4-inch shank, 1-flute.
Amana Tool 45806 14-Degree Dovetail 1/2-Inch Diameter x .532-Inch Cutting Height x 1/2-Inch Shank 2-Flute Carbide Tipped Router Bit
- 532″ shank diameter 1/2″ length 2-1/2″amana 45806 features many router dovetail jigs require special bits for cutting half-blind and through dovetails. Amana 45806 specifications angle 14° cut diameter 1/2″ flute length 0. We have bits designed for name brand dovetail jigs, including leigh, keller, omnijig and incra (all sold separately).
Amana Tool 47104 Flush Trim 1/2-Inch Diameter by 1-Inch Cutting Height by 1/4-Inch Shank 2-Flute Router Bit
- Carbide tipped, industrial quality. Cutting diameter 1/2-inch. 1/4-inch shank. Excellent for template work. 1/2-inch cutting height.
Amana Tool Plunge 1/4 Dia Upper Bb 1/4Shk – 47224
- Flush trim plunge template router bits w/ upper ball bearing.
Amana Tool MB10800 Double Face Melamine 10-Inch x 80 Tooth H-ATB 5/8-Inch Bore Saw Blade
- Copper plugs to reduce noise and vibration during operation. Excellent for single and double sided melamine extremely smooth cuts. Massive tool steel plate, with laser cut expansion slots allowing the blade to expand and contract from heat preventing warpage extra large carbide teeth provide more resharpenings. 10 inch x 80 teeth high alternate top bevel grind -6 degree hook. Tension rings which maintains the blades straightness under stress of operation.
Amana Tool 46280 CNC 2D and 3D Carving 6.2 Deg Tapered Angle Ball Nose x 1/32 D x 1/64 R x 1 CH x 1/4 SHK x 3 Inch Long x 3 Flute SC ZrN Coated Router Bit
- Carbide tipped. 45 degree angle. Carbide tipped, industrial quality. Cutting diameter 1-1/4-inch. 1/2-inch cutting height.
Amana Tool 45487 Flush Trim Template and Pattern Plunge 2-Flute Carbide Tipped Router Bit with Ball Bearing, 1/4-Inch Shank
- The template is attached to the workpiece, and the pilot bearing rides along its edge as the cutting edges rout the workpiece, forming an exact duplicate of the template. It is a versatile bit, useful for template/pattern routing of parts, joints, and internal cuts, and can be used in handheld and table-mounted routers. This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. With a handheld router, the pattern is on top of the work with a table-mounted router, the pattern is underneath the work. .
Amana Tool 55206 Carbide Tipped Countersink #8 Screw 125/64 D x 5/62 Drill D x 5/16 Round SHK
- 82 degree carbide tipped countersinks with round shank.
Amana Tool 49518 Corner Rounding 1-1/2 Diameter by 1/2-Inch Radius by 1/2-Inch Shank 2 Flute Router Bit
- The cut can be used to ease edges, as a simple profile, or as a part of a complex one. The tool is shouldered to cut a fillet. If a smaller pilot bearing is used, a second shoulder can be produced, in effect making the bit a beading bit. Also known as roundover, rounding over, and quarter-round. Amana 49518 specifications large diameter 1-1/2″ radius 1/2″ carbide height 3/4″ shank diameter 1/2″ overall length 2-5/8″ amana 49518 features the basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius.
Amana Tool 45460 Flush Trim Template and Pattern Plunge 2-Flute Carbide Tipped Router Bit with Upper Ball Bearing, 1/4-Inch Shank
- 1-inch cutting height. Cutting diameter 1/2-inch. Carbide tipped, industrial quality. 1/4-inch shank, 2-flute.
Amana Tool 55229 Carbide Tipped Countersink with No Burning and No Marring Adjustable Depth Stop wit
- 82-1/2-degree angle. 1/4-inch shank, 2 flute. Carbide tipped, industrial quality. For extra-fine carving and lettering details. Cutting diameter 3/16-inch.
Amana Tool MR0102 Flush with Mini Ball Bearing Guide 3/16-Inch Diameter, 7/16-Inch Cutting Height, 1/4-Inch Shank Carbide Tipped Router Bit
- 7/16-inch cutting height, 2-inch length. 1/4-inch shank, 2 flute. Amana tool exclusive flush miniature bit. 3/16-inch cutting diameter. Carbide tipped, industrial quality.
Amana Tool 45426 Straight Plunge 1/2-Inch Diameter by 2-Inch Cutting Height by 1/2-Inch Shank 2-Flute Router Bit
- 200% longer life time even when working with abrasive materials. Super clean cuts. Cost effective. Amana 45426 specifications cutting diameter 1/2″ cutting height 2″ shank diameter 1/2″ length 4-1/4″amana 45426 features 600-grit finish micrograin carbide tips high precision cnc machined tool body and tip profile radial relief grind new advanced automatic grinding technology that improves the carbides’ resistance to wear.
Amana Tool 46315 CNC Spiral Flute Plunge 2-Flute Up-Cut Solid Carbide Router Bit, 1/4-Inch Shank
- 1/4-inch shank, 2-flute. Up-cut design, great for mortising. 1/2-inch shank, 3-flute. Cutting diameter 1/4-inch. Solid carbide, industrial quality.
Amana Tool 49402 45 Degree Chamfer 1-1/4-Inch Diameter by 1/2-Inch Shank 2-Flute Router Bit
- Produce crisp, uniform edges at accurate angles to make 4-, 6-, 8-, 12-, or 16-sided boxes. For best results use in a router table. Amana 49402 specifications degree of angle 45° large diameter 1-1/4″ carbide height 1/2″ cutting length 5/8″ shank diameter 1/2″ overall length 2-3/8″ amana 49402 features chamfer or bevel edges for decorative effect or to form edge miter joints.
Amana Tool 47114 Flush Trim with Ball Bearing Guide 1/2 by 1 by 1/4-inch Shank 3 Flute Carbide Tipped Router Bit
- Excellent for template work. Carbide tipped, industrial quality. 1-inch cutting height, 2-5/8-inch length. 1/2-inch cutting diameter. 1/4-inch shank, 3 flute.
Amana Tool 45453 Carbide Tipped Straight Plunge High Production 1-3/4 D x 1-1/4 CH x 1/2 Inch SHK Router Bit
- Straight plunge cutting router bits-1/2 shank-2 flute, high production.
Amana Tool 610504 Combination 10-Inch x 50 Tooth 4ATB+1 Raker 5/8-Inch Bore Saw Blade
- Massive tool steel plate, with laser cut expansion slots allowing the blade to expand and contract from heat preventing warpage extra large carbide teeth provide more resharpenings. Extra large carbide tips providing more resharpenings. 15 degree hook 4atb +1 raker grind in groupings of 5 carbide teeth alternate left and right with the 5th tooth straight. Tension rings which maintains the blades straightness under stress of operation. Great for crosscutting and ripping hardwood, softwood, and plywood.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
