Best Paring Chisel out of top 17

 

Narex Pair Right & Left 12 mm 1/2″ Skew Paring Chisels in Wooden Presentation Box 851662 - Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to rc 59. Pair of chisels comes in a wooden presentation box. Handles made from super hard european hornbeam. Bevel ground at 30 degree skew and a 25 degree bevel. Contains both right and left skew chisel 12 mm 1/2″ wide.

 

WoodRiver Bent Paring Chisel 1/4″ - Woodriver® bent paring chisels are a relatively simple solution for removing glue lines, trimming protruding plugs or cleaning out corners. That provides the necessary relief to enable the user to grasp the handle while keeping the blade of the chisel flat on the work surface. We’ve taken our standard wr bench chisel and bent the tang at about an 18° angle.

 

Paring Chisel Set - Paring tools, both bent and straight shank, are used for delicate trimming and fitting. The extra-long blade and handle allow you to hold the tool against your body so you can use your weight and motion to achieve a controlled cut not possible with regular chisels. If you’ve never used a paring chisel, you’re missing one of the real pleasures of hand tool woodworking. The bent-shank parers feature a shank that is bent up and away from the blade holding the handle clear of the surface being trimmed. These fine chisels are fitted with a beautifully turned and lacquered 6 1/4″ ash handle and have an average blade length of 6 3/4″. .

 

Paring Chisel 06 mm (1/4″) - Fully ground and sharpened. Blade length 245 mm [965 inch] / total length 390 mm [1535 inch]. Thin sides for sidewall clearance. Forged from highly alloyed cr-mn steel and heat treated up to 59 hrc. Handle stained hornbeam wood, brass-plated ferrule.

 

Diefenbacher 3/4″ Paring Chisel - 25″ hardwood handles and have an average blade length of 6. If you’ve never used a paring chisel, you’re missing one of the real pleasures of hand tool woodworking. Paring chisels, goth straight and bent-shank, are used for delicate trimming and fitting. The extra-long blade and handle allow you to hold the tool against your body so you can use your weight and motion to achieve a controlled cut not possible with regular chisels. These fine chisels are fitted with 6. 75″.

 

WoodRiver Bent Paring Chisel 1″ - We’ve taken our standard woodriver bench chisel and bent the tang at about an 18° angle. That provides the necessary relief to enable the user to grasp the handle while keeping the blade of the chisel flat on the work surface. Woodriver® bent paring chisels are a relatively simple solution for removing glue lines, trimming protruding plugs or cleaning out corners.

 

Diefenbacher 3/8″ Bent Paring Chisel - 25 inch hardwood handles and have an average blade length of 6. The chisel shank is bent up and away form the blade holding the handle clear of the surface being trimmed. Bent shank paring chisels are used for delicate trimming and fitting. This unique feature allows the user to work in areas that would be impossible to reach with a conventional chisel. 75 inches. These beautiful tools are fitted with 6.

 

Paring Chisel With Cranked Neck – 19 mm (3/4”) - Fully ground and sharpened. Provide for the cleaning of flat surfaces and others that can not be achieved by normal wood chisel. Length of the blade 131 mm (515748 inch) — total length 276 mm (1086614). Forged from highly alloyed cr-mn steel and heat treated up to 59 hrc. Handle stained hornbeam wood, brass-plated ferrule.

 

Narex Right & Left 26 mm 1 1/16″ Skew Paring Chisels 81126/811176 - Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to rc 59. Made by a small tool manufacturer in the czech republic. Contains both right and left skew chisel 26 mm 1 1/16″ wide. Handles are made from super hard european hornbeam. Bevel ground at 30 degree skew and a 25 degree bevel.

 

WoodRiver Bent Paring Chisel 3/4″ - Woodriver® bent paring chisels are a relatively simple solution for removing glue lines, trimming protruding plugs or cleaning out corners. . That provides the necessary relief to enable the user to grasp the handle while keeping the blade of the chisel flat on the work surface. We’ve taken our standard woodriver bench chisel and bent the tang at about an 18° angle.

 

Paring Chisel With Cranked Neck – 25 mm (1”) - Forged from highly alloyed cr-mn steel and heat treated up to 59 hrc. Fully ground and sharpened. Provide for the cleaning of flat surfaces and others that can not be achieved by normal wood chisel. Length of the blade 138 mm (543307 inch) — total length 282 mm (1110236). Handle stained hornbeam wood, brass-plated ferrule.

 

Iyoroi 2″ Kamaji Blue Steel Paring Chisel - These paring chisels (kinari nomi) characterize the highest form of the chiselmaker’s art. They represent the lifetime culmination of experience and work of three master blacksmiths. The handles are hand-turned from japanese red sandalwood. Only the very highest quality materials are used in their construction, following time honored technics from centuries past. Available in sizes 1/2″, 3/4″, 1″, 1-1/2″, and this product’s size 2″. After the various forging and tempering process, the wrought iron is acid etched to expose a layered structure similar to wood grain. Overall length is 14″, blade length 3-1/4″. These chisels are offered to the discriminating woodworker demanding the very best, as well as to those few individuals wanting a piece of the old-time japanese toolmaking tradition. Iyoroi repeatedly folds and forges together the wrought iron material to increase its strength and preserve its malleability. Master blacksmith iyoroi created these kamaji paring chisels from blue steel forge welded to 100+ year old wrought iron.

 

Narex Pair Right & Left 6 mm 1/4″ Skew Paring Chisels in Wooden Presentation Box 851656 - Bevel ground at 30 degree skew and a 25 degree bevel. Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to rc 59. Packaged in a wooden presentation box. Handles made from super hard european hornbeam. Contains both right and left skew chisel 6 mm 1/4″ wide.

 

WoodRiver Bent Paring Chisel 1/2″ - We’ve taken our standard woodriver bench chisel and bent the tang at about an 18° angle. . That provides the necessary relief to enable the user to grasp the handle while keeping the blade of the chisel flat on the work surface. Woodriver® bent paring chisels are a relatively simple solution for removing glue lines, trimming protruding plugs or cleaning out corners.

 

Paring Chisel 25 mm (1″) - Fully ground and sharpened. Handle stained hornbeam wood, brass-plated ferrule. Blade length 245 mm [965 inch] / total length 390 mm [1535 inch]. Forged from highly alloyed cr-mn steel and heat treated up to 59 hrc. Thin sides for sidewall clearance.

 

Paring Chisel With Cranked Neck – 6 mm (1/4”) - Fully ground and sharpened. Handle stained hornbeam wood, brass-plated ferrule. Provide for the cleaning of flat surfaces and others that can not be achieved by normal wood chisel. Length of the blade 118 mm (464567 inch) — total length 252 mm (992126). Forged from highly alloyed cr-mn steel and heat treated up to 59 hrc.

 

Paring Chisel With Cranked Neck – 13 mm (1/2”) - Provide for the cleaning of flat surfaces and others that can not be achieved by normal wood chisel. Handle stained hornbeam wood, brass-plated ferrule. Fully ground and sharpened. Forged from highly alloyed cr-mn steel and heat treated up to 59 hrc. Length of the blade 122 mm (480315 inch) — total length 256 mm (1007874).

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.