Best Chicago Pneumatic out of top 25

 

Chicago Pneumatic CP2755 Pistol Grip Screwdriver with Direct Drive - The chicago pneumatic cp2755 pistol grip screwdriver with direct drive has a 1/4 female quick change chuck and is perfect for holding 1/4 inch bits or any 1/4 shank accessories like cp’s new stud cleaners. 3 cfm under load, 2. 5 cfm average air consumption, 6. 200 rpm, 124 inch lbs, 2. 2. 3 net weight, part number 6151922755. Reversible control at the trigger, ergonomic comfort grip on the handle, excellent for soft draw rundowns like screws.

 

Chicago Pneumatic SS4211WP 1/2″Drive 11 Piece SAE/Metric Impact Socket Set - 24 inches. 36 inches. -11 piece 1/2”” drive metric and sae wheel nut protector impact socket set. Overall width, side to side -10. -Plastic case with built in handle. Cptss4211wp features -plastic coating on outside of socket wall to prevent damage to rims. Dimensions overall height, top to bottom -2. Overall product weight -8. -Plastic cap on inside of socket to protect lug nut for damage. 05 pounds.

 

Chicago Pneumatic CP9790 Pistol Style, Keyed Chuck 3/8-Inch Heavy Duty Reversible Drill - 1 lbs. The handle has an ergomomic grip included which definitely maximizes operator comfort. 3/8 chuck capacity, 6. The cp9790 is a 3/8-inch heavy duty pistol drill with a. 5 -inch, net weight 3. 37 horepower motor, the tool comes with an industrial qualitry jacobs 3/8-inch chuck and the rpm is a fast 2,000 rpm’s. Chicago pneumatic air drills have set the standard for quality drilling the past 50 years. 0 cfm average air consumption, 24 cfm under load, overall length 6.

 

Chicago Pneumatic SS4013D 1/2″ Drive 13 Piece SAE Deep Impact Socket Set - Large, easy to read, laser etch numbers. Lifetime limited warranty. Lead in chamfer for quick connections. Blo-molded case.

 

Chicago Pneumatic Tool CP9882 Air Hydraulic Riveter - Easy pulling up to 2,200 lbs. Includes nose pieces for rivets 3/32″, 1/8″, 5/32″ and 3/16″. The cp9882 air hydraulic riveter is a very compact riveter with a 3/16″ max capacity. Tool designed for rivets in aluminum, copper and softer materials. Transparent container with holes for quick release of rivet ends.

 

Chicago Pneumatic CP7110K Air Hammer Kit - Vibration isolation system for smoother operation and greater comfort. Unique cushioned exhaust deflector on barrel for comfort and control along with an internal muffler to which minimizes exhaust sound. Heavy-duty pistol grip air hammer which is powerful, yet economical for fast cutting action. Includes (1) quick change retainer, (1) spring retainer, (4) chisels, and heavy duty carrying case. Teasing trigger for slow start-up and total control.

 

Chicago Pneumatic Tool CP7769 Heavy Duty 3/4-Inch Impact Wrench with Light Weight Composite Housing - Great power at 1440 maximum torque in reverse. This tool will impress. Low air consumption air motor. The chicago pneumatic cp7769 3/4″ heavy duty lightweight composite impact wrench with s2s (side to side forward / reverse) technology. Lightweight with composite handle/motor housing and magnesium clutch housing.

 

Chicago Pneumatic CP7150K Air Hammer Kit - 401 round shankmost powerful hammer in its classlonger piston stroke for more powerintegral muffler minimizes exhaust soundexcellent power / weight ratiofast action and withstands rugged useideal tool for heavy duty applicationchicago pneumatic cp7150k heavy duty air hammer kit. Featuresstandard. Chisels and spring included for the most popular applications. The cp7150 has a long barrel with additional power to chip away at steel, concrete or other ferrus metals.

 

Chicago Pneumatic CP772H 3/4-Inch Drive Super Duty Air Impact Wrench - Handle exhaust directs air away from the workpiece and operator. Integral 360 degree air inlet swivel. Many heavy dytu applications. Improved oil bath dyna-pact clutch delivers higher performance and extended durability. Differential regulator allows the operator to match the required power to the job.

 

Chicago Pneumatic CP875 1/4-Inch 90 Degree Angled Air Die Grinder - ) 1/4, variable speed yes, speed (rpm) 22,500, air inlet size (in. Npt) 1/4, air consumption (cfm) 5. ) 1. This chicago pneumatic mini angle die grinder boasts a compact, lightweight design for easy maneuverability and a 90deg angle head for flexibility in confined areas. Hose size (in. Collet size (in. ) 3/8, cfm at load 22, tool weight (lbs. 5, side handle no, tool length (in. ) 4 7/8, min.

 

Chicago Pneumatic CP7763 3/4-Inch Super Duty Air Impact Wrench - 1200 ft lbs of torque, power to loosen the toughest fastener. Weighs less than 12 lbs, comfort over long periods of use. Twin hammer high performance clutch, longer life under tough conditions. Ergonomic handle exhaust keeps exhaust air away from the operator. 6 vane motor for speed, power with any 1/2-inch hose air supply.

 

Chicago Pneumatic CP717 Super Duty Air Hammer - Warranty -1 yr warranty on material and workmanship. Cpt717 features -most powerful cp air hammer for automotive, truck and off road equipment. 13 cfm air inlet thread 1/4″ nptf minimum hose size 3/8″ sound dba 95 length 9. -Positive action trigger for precise control. 75″ weight 4.   Stroke 2. 69″ average air consumption 3. 498″ diameter chisel shank to handle the extra powerapplications front end work, king pin removal, removal and installation of bulldozer walking beams, removal of truck springs and heavy-duty spring bushings. . 75 lb. Specifications -1,800 blows per minute. Dimensions -. -Super duty air hammer.

 

Chicago Pneumatic CP7120 Needle Scaler - Adjustability sleeve adjusts for needle protrusion in tune with application needs. Great features, durability, flexibility, and power to clean. Wear resistant needles 19 needles made of 1/8″ high wear resistant steel. This tool can easily convert from a needle scaler to a chisel scaler. Needle scaler for all your surface preparation needsspeed 4,600 blows per minute for highly efficient work. Chicago pneumatic cp7120 needle scaler. Chicago pneumatic cp7120 needle scaler featureswith 4,600 blows per minute, adjustable sleeve for job specific requirements, and high wear resistant steel needles, this is a dependable tool for all your surface preparation needs.

 

Chicago Pneumatic CP7200S Mini Random Orbital Sander Kit - Rubber molded palm grip for added comfort. Compact and lightweight for easy access in tight areas. Silenced handle exhaust directs air away from work area. Two-finger throttle for easier control and less fatigue. Adjustable speed regulator to match the speed to the job.

 

Chicago Pneumatic CP860 Heavy Duty Air Die Grinder - Rugged, energy-efficient 1/2 hp motor. Built-in regulator matches speed to job. Rear exhaust directs air away from work. Square handle design for positive grip. Cp classic tool- now comes with 2 year warranty.

 

Chicago Pneumatic SS413WP 1/2″ Drive 3 Piece Metric Deep Wheel ProtectorImpact Socket Set - -3 most common metric sockets used on passenger cars. 65 inches. Overall product weight -1. Dimensions overall height, top to bottom -1. Cptss413wp features -plastic coating on outside of socket wall to prevent damage to rims. -plastic cap on inside of socket to protect lug nut for damage. 76 pounds. -Case hardening sockets for longer lifesizes include 17mm, 19mm, 21mm. 77 inches. Overall width, side to side -4.

 

Chicago Pneumatic CP7268 Heavy Duty Twin Piston Straight Line Sander - This chicago pneumatic straight line sander is great for fast material removal, body sanding and leveling side panel work on cars and trucks. Npt) 1/4, tool weight (lbs. 7, case included no, air consumption (cfm) 8. 5. ) 7, cfm at load 10. Air inlet size (in.

 

Chicago Pneumatic CP9913 Light Duty Balancer Load Range: 4.4 to 6.6-Pound - Cable made of stainless steel. 52 feet cable stroke. 1-year parts and labor. Aluminum housing. Weight 15 pounds.

 

Chicago Pneumatic CP870 Dual Action Sander - Generic dimensions -excellent for blending and smoothing filler, feather edging and pre-paint preparationpad size diameter 6″ free speed 10,000 rpm average air consumption 8 cfm air inlet thread 1/4″ nptf minimum hose size 3/8″ sound dba 85 weight 4. -Lock off throttle to prevent accidental start ups. Overall width, side to side -6. 5 inches. Product type -orbital sander. 1 inches. Overall depth, front to back -10. Overall product weight -4. 25 lbs. Pad size -5″, 8″. 147-cp870 features -power regulator for precise control. 5 inches. 7 pounds. -Insulated grip provides comfort to operator. Dimensions overall height, top to bottom -4. -Dual action sander.

 

Chicago Pneumatic CP7748-2 1/2-Inch High Torque Impact Wrench, Heavy Duty, Composite Housing with 2-Inch Extended Anvil - The chicago pneumatic cp7748-2 is the best extended anvil tool on the market today. The air motor design holds up in dirty envirnoments better than all other composite competitors. 9 lbs. It is designed for high volume tire shops and fleets. This tool is extremely strong with over 1200 foot pounds of nut loosening power and weighs just 4. The composite housing with aluminum back cap support along with a thermo-plastic rubber injected grip makes the tool super durable and comfortable. Quiet handle exhaust, twin hammer mechanism, full teasing ergonomically developed trigger, swivel air inlet, free speed 8,200, working torque 75-580, max torque 922 ft lbs, super great value.

 

Chicago Pneumatic CP872 Air Die Grinder - Air inlet size (in. ) 3/8, speed (rpm) 22,000, variable speed yes, air consumption (cfm) 6. 5, cfm at load 26, tool length (in. This chicago pneumatic standard-duty air die grinder features an adjustable speed regulator for precise control and lock off throttle to prevent accidental startups. ) 1/4 and 6mm. ) 1. ) 5 3/4, collet size (in. Hose size (in. 25, side handle no, min. Npt) 1/4, tool weight (lbs.

 

Chicago Pneumatic CP7749 1/2-Inch Air Impact Wrench - The 2-stage trigger offers great control along with the bi-material covering on the trigger. Ergonomic, curved handle with thermo-plastic rubber injected in housing for strong durability, less weight and comfortable grip, provides insulation and is resistant to most chemicals used in workshops. Easy operation with the power setting system positioned behind the trigger which allows for 1-hand operation and is accessible for left or right-handed operators. S2s (side to side) technology for forward / reverse functionality located directly above the trigger. Extreme torque 955 ftlbs (1300 nm) in reverse with a twin hammer mechanism.

 

Chicago Pneumatic A046094 Air Chisel Spring Retainer- Quick Zip for .401 Shank - Item weight, 0. Zip quick retainers. 150 lbs.

 

Chicago Pneumatic CP9108Q-B Heavy Duty Angle Die Grinder - Low noise level, 81 db(a). Excellent tool for general maintenance applications, 120 degree angle. Efficient and powerful 032 hp (240w) motor, at 25,000 rpm free speed. 1-year parts and labor warranty. Easy access speed regulator with a compact and ergonomic grip offers high operator comfort.

 

Chicago Pneumatic Tool CP7782-6 Heavy Duty 1-Inch Impact Wrench with 6-Inch Extended Anvil - . Regulator with integrated forward/reverse with 3 position power settings in both directions. Ergonomic side handle and socket retainer ring combined with hole retainer. The chicago pneumatic cp7782-6 1″ heavy duty impact wrench with 6″ extended anvil has great power for the toughest jobs on truck, bus and heavy equipment applications.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.