Best and Coolest 24 Step Pulleys

 

5 Diameter - 3 Step Pulley 12 - 58 Fixed Bore - Die Cast by Congress

5″ Diameter – 3 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress

5″ Diameter – 3 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress - Fits 1/2″ & 5/8″ shaft, reducer bushing included. 2nd step = 4″. 1st step = 3″. Manufacture = congress. 3rd step = 5″.

 

JET 692188 9 in x 42 in Step Pulley Mill with Newall DP500 DRO with X-Axis Powerfeed

JET 692188 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO with X-Axis Powerfeed

JET 692188 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO with X-Axis Powerfeed - Precision bored and honed milling head. Certified meehanite castings. Large diameter quill is chromed. High precision class 7 spindle bearings. Spindle head is internally cooled.

 

Palmgren 20 16- Speed Floor step pulley drill press

Palmgren 20″ 16- Speed Floor step pulley drill press

Palmgren 20″ 16- Speed Floor step pulley drill press - Meehanite casting. Palmgren 20″ 12-speed floor step pulley drill press. Large diameter quill is chromed. High precision class 7 spindle bearings. Precision bored and honed milling head.

 

Palmgren 9680178 Heavy Duty 16-Speed Floor Step Pulley Drill Press 17 Swing 1 hp 240V 3 Phase

Palmgren 9680178 Heavy Duty 16-Speed Floor Step Pulley Drill Press, 17″ Swing, 1 hp, 240V, 3 Phase

Palmgren 9680178 Heavy Duty 16-Speed Floor Step Pulley Drill Press, 17″ Swing, 1 hp, 240V, 3 Phase - Quick change vertical depth stop for accurate, repeatable feed length. Led readout for spindle speeds. Fully enclosed spindle with spaced bearings for maximum spindle support and accurate drilling operations. Extended quill/spindle travel ideal for deep hole applications. Maximum spindle run out of 00005″.

 

4 Diameter - 4 Step Pulley 12 - 58 Fixed Bore - Die Cast by Congress

4″ Diameter – 4 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress

4″ Diameter – 4 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress - 1st step = 2″. 3rd step = 3 3/8″. 2nd step = 2 5/8″. Fits 1/2″ & 5/8″ shaft, reducer bushing included. 4th step = 4″.

 

Palmgren 20 12-Speed Floor step pulley drill press

Palmgren 20″ 12-Speed Floor step pulley drill press

Palmgren 20″ 12-Speed Floor step pulley drill press - Â  [custom1] specification description model 80329 swing 20 in motor hp 1 hp voltage 115/230 amps 16/8 a capacity cast iron 1 in spindle speeds 12 rpm 140 to 2600 spindle taper mt3 spindle travel 5 in spindle to table 26 in table work surface 13×15 in table slots 5/8 in height 70 width 23. Cast iron head, table and base maximum spindle runout of 0. 0005″ extended quill travel rack and pinion table raiser spindle depth stop front mounted push button on/off switch heavy duty, precision ground, t-slotted work table with coolant trough heavy duty spindle bearings drill chuck and arbor. Production duty drill press designed and built to handle a wide variety of uses from general purpose drilling applications to production jobs. 5 in depth 33 in [/custom1]. 0005″ for accurate drilled holes. This drill delivers performance and reliability at an economical price. Fully enclosed spindle with a maximum runout of. Rack and pinion table raiser easily positions the work piece and fixture at the proper height.

 

Jet JVM-836-3 Step Pulley Milling Machine 230V 3Ph

Jet JVM-836-3 Step Pulley Milling Machine 230V 3Ph

Jet JVM-836-3 Step Pulley Milling Machine 230V 3Ph - Large diameter quill is chromed. 9×42 step pulley milling machine. Certified meehanite castings. High precision class 7 spindle bearings. Spindle head is internally cooled.

 

JET 692191 9 in x 42 in Step Pulley Mill with 3-Axis Newall DP500 DRO Quill with X-Axis Powerfeed

JET 692191 9 in. x 42 in. Step Pulley Mill with 3-Axis Newall DP500 DRO (Quill) with X-Axis Powerfeed

JET 692191 9 in. x 42 in. Step Pulley Mill with 3-Axis Newall DP500 DRO (Quill) with X-Axis Powerfeed - Large diameter quill is chromed. Precision bored and honed milling head. Certified meehanite castings. Spindle head is internally cooled. High precision class 7 spindle bearings.

 

Palmgren 12 16- Speed Bench step pulley drill press

Palmgren 12″ 16- Speed Bench step pulley drill press

Palmgren 12″ 16- Speed Bench step pulley drill press - A wider range of operation speeds for drilling both large and small holes. The oversized, massive drill heads have widely spaced bearing surfaces that provide full quill support throughout its travel. They have the weight and rigidity to maintain the built-in tight tolerances required for metalworking applications. Fully enclosed spindle for accurate drilling operations maximum spindle run out of 00005″.

 

9x42 Step Pulley Milling Machine

9×42 Step Pulley Milling Machine

9×42 Step Pulley Milling Machine - Meehanite® casting high precision class 7 spindle bearings heavy-duty splined motor drive three-stage power downfeed with automatic stop precision bored and honed milling head large diameter quill is chromed spindle head is internally cooled satin chrome finished dials one-piece quill pinion and shaft heavy-duty spindle brake equipped with one-shot lubrication system way covers draw bar tool box and tools.

 

CH Hanson Palmgren Machine 9680341 Radial Arm - 5 Speed Bench step pulley drill press

CH Hanson Palmgren Machine 9680341 Radial Arm – 5 Speed Bench step pulley drill press

CH Hanson Palmgren Machine 9680341 Radial Arm – 5 Speed Bench step pulley drill press - Radial arm design with swing from 9 to 33″, tilting head and table. Swing depth from 9-inch to 33-inch (45-inch to 165-inch from spindle to column). Head tilts 90-degree right and left with spindle travel of 315-inch. Palmgren radial arm, 5 speed bench step pulley drill press.

 

Palmgren 9680158 Heavy Duty 16-Speed Bench Step Pulley Drill Press 15 Swing 12 hp 120240V 1 Phase

Palmgren 9680158 Heavy Duty 16-Speed Bench Step Pulley Drill Press, 15″ Swing, 1/2 hp, 120/240V, 1 Phase

Palmgren 9680158 Heavy Duty 16-Speed Bench Step Pulley Drill Press, 15″ Swing, 1/2 hp, 120/240V, 1 Phase - Led readout for spindle speeds. Quick change vertical depth stop for accurate, repeatable feed length. Extended quill/spindle travel ideal for deep hole applications. Fully enclosed spindle with spaced bearings for maximum spindle support and accurate drilling operations. Maximum spindle run out of 00005″.

 

JET 692195 9 in x 42 in Step Pulley Mill with Newall DP500 DRO with X- and Y-Axis Powerfeeds

JET 692195 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO with X- and Y-Axis Powerfeeds

JET 692195 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO with X- and Y-Axis Powerfeeds - Spindle head is internally cooled. Precision bored and honed milling head. High precision class 7 spindle bearings. Certified meehanite castings. Large diameter quill is chromed.

 

6 Diameter - 3 Step Pulley 12 - 58 Fixed Bore - Die Cast by Congress

6″ Diameter – 3 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress

6″ Diameter – 3 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress - 3rd step = 6″. Manufacture = congress. 1st step = 4″. 2nd step = 5″. Fits 1/2″ & 5/8″ shaft, reducer bushing included.

 

Palmgren 20 12-Speed Floor step pulley drill press

Palmgren 20″ 12-Speed Floor step pulley drill press

Palmgren 20″ 12-Speed Floor step pulley drill press - 12-speeds, digital depth and rpm readout, 6″ spindle travel. Fully enclosed spindle with a maximum run out of 0005″ for accurate drilled holes. Rack and pinion table raiser. Rack and pinion table raiser easily positions the work piece and fixture at proper height.

 

3 516 - Diameter 3 Step Pulley 12 - 58 Fixed Bore - Die Cast by Congress

3 5/16″ – Diameter 3 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress

3 5/16″ – Diameter 3 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress - 1st step = 1 15/16″. Fits 1/2″ & 5/8″ shaft, reducer bushing included. 3rd step = 3 5/16″. 2nd step = 2 1/2″. Manufacture = congress.

 

Step Pulley Mill Machine 2 HP 3 PH 230 V

Step Pulley Mill Machine, 2 HP, 3 PH, 230 V

Step Pulley Mill Machine, 2 HP, 3 PH, 230 V - Three-stage power down feed with auto stop, high precision class 7 spindle bearings and the rugged stability of meehanite castings ensures you get everything you need from the jtm-1 and 2 models. The internally cooled spindle head prevents seizing, and jet precision engineering ensures superior results with all the features you’ve come to expect and is backed by the industry-leading jet two year warranty. .

 

JET 692194 9 in x 42 in Step Pulley Mill with Newall DP500 DRO with X-Axis Powerfeed

JET 692194 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO with X-Axis Powerfeed

JET 692194 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO with X-Axis Powerfeed - High precision class 7 spindle bearings. Spindle head is internally cooled. Precision bored and honed milling head. Certified meehanite castings. Large diameter quill is chromed.

 

V-Belt Pulley 6 In OD 58 Bore 4 Step

V-Belt Pulley, 6 In OD, 5/8 Bore, 4 Step

V-Belt Pulley, 6 In OD, 5/8 Bore, 4 Step - 5/8 or 1/2 in. Use only one 4l or a section v-belt per pair (or set). Will fit a 5/8″ or 1/2″ dia. 5/8 or 1/2 in. Pitch dia. Shaft. Zamak/zinc alloy reducer bushing included solid construction. V-belt pulley, 4 step fixed bore, bore dia. , Outside dia. , 4 groove, die cast (zamak #3) material, for use with one 4l or a section v-belt per pair (or set), includes reducer bushing 3- and 4-step die-cast sheavesbore and grooves are machined together to provide high concentricity. 6, 5, 4, 3 in. 15″ less than outside dia. Use in pairs (1 inverted), in any combination, for effective speed regulation. Is 0. , Fits shaft dia.

 

Palmgren 20 16- Speed Floor step pulley drill press

Palmgren 20″ 16- Speed Floor step pulley drill press

Palmgren 20″ 16- Speed Floor step pulley drill press - 3/4-inch chuck and self-ejecting key are included. Work table height is adjustable using rack and pinion mechanism. 16 spindle speeds range from 120 to 3605 rpm for drilling steel, cast iron, aluminum, wood, and plastic. Work table surface is precision ground and features t-slots for secure, accurate mounting of work piece and also a coolant trough. Other features include an enclosed ball bearing quill assembly, quick belt change and tension mechanism, positive quick adjust feed depth stop and a 1 1/2 hp, 1725 rpm motor. Digital readout displays spindle depth and spindle rpm. Table can be tilted 45-degree both right and left. The palmgren 20-inch floor model drill press features a heavy duty cast iron base, column collar, work table, and head.

 

JET 692193 9 in x 42 in Step Pulley Mill with Newall DP500 DRO

JET 692193 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO

JET 692193 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO - High precision class 7 spindle bearings. Large diameter quill is chromed. Certified meehanite castings. Spindle head is internally cooled. Precision bored and honed milling head.

 

JET 692197 9 in x 42 in Step Pulley Mill with 3-Axis Newall DP500 DRO Quill

JET 692197 9 in. x 42 in. Step Pulley Mill with 3-Axis Newall DP500 DRO (Quill)

JET 692197 9 in. x 42 in. Step Pulley Mill with 3-Axis Newall DP500 DRO (Quill) - Large diameter quill is chromed. Precision bored and honed milling head. High precision class 7 spindle bearings. Spindle head is internally cooled. Certified meehanite castings.

 

JET 692199 9 in x 42 in Step Pulley Mill with 3-Axis Newall DP500 DRO Quill with X- and Y-Axis Powerfeeds

JET 692199 9 in. x 42 in. Step Pulley Mill with 3-Axis Newall DP500 DRO (Quill) with X- and Y-Axis Powerfeeds

JET 692199 9 in. x 42 in. Step Pulley Mill with 3-Axis Newall DP500 DRO (Quill) with X- and Y-Axis Powerfeeds - Certified meehanite castings. Precision bored and honed milling head. Spindle head is internally cooled. High precision class 7 spindle bearings. Large diameter quill is chromed.

 

Jet JTM-2 Step Pulley Milling Machine 115230V 1Ph

Jet JTM-2 Step Pulley Milling Machine 115/230V 1Ph

Jet JTM-2 Step Pulley Milling Machine 115/230V 1Ph - High precision class 7 spindle bearings. Large diameter quill is chromed. 9×42 step pulley milling machine. Spindle head is internally cooled. Certified meehanite castings.