Best and Coolest 15 Flap Disc Types

 

Walter Surface Technologies 15Q458 Enduro-Flex Stainless Abrasive Flap Disc Type 29 80 Grit 78 Arbor Trimmable Wood Fiber Backing Zirconia Alumina Pack of 10

Walter Surface Technologies 15Q458 Enduro-Flex Stainless Abrasive Flap Disc, Type 29, 80 Grit, 7/8″ Arbor, Trimmable Wood Fiber Backing, Zirconia Alumina (Pack of 10)

Walter Surface Technologies 15Q458 Enduro-Flex Stainless Abrasive Flap Disc, Type 29, 80 Grit, 7/8″ Arbor, Trimmable Wood Fiber Backing, Zirconia Alumina (Pack of 10) - Eco-trim backing can be safely trimmed to reveal fresh abrasive grains. Consistent material removal throughout the life of the disc. Safe for use on stainless steel and aluminum. Long life means less flap discs are needed to perform the same amount of work. Using enduro-flex there is no need to discard the disc when the flap overhang is worn down to the backing.

 

CGW 42732 Premium Z3 Right Angle Grinder Abrasive Flap Disc Type 29 Zirconia 7 Diameter 40 Grit 58-11 Arbor Regular Thickness  Pack of 1

CGW 42732 Premium Z3 Right Angle Grinder Abrasive Flap Disc, Type 29, Zirconia, 7″ Diameter, 40 Grit, 5/8″-11 Arbor, Regular Thickness (Pack of 1)

CGW 42732 Premium Z3 Right Angle Grinder Abrasive Flap Disc, Type 29, Zirconia, 7″ Diameter, 40 Grit, 5/8″-11 Arbor, Regular Thickness (Pack of 1) - Use for right angle grinder. Recommended for aggressive use and heavy duty applications. Abrasive flap disc are active grinding agent, provides cool cutting with light pressure. Special optimized resin bond offers maximum cutting capacity, strong edge stability and long life. Premium zirconia alumina grain with a poly/cotton heat treated backing.

 

CGW 42102 Premium Z3 Right Angle Grinder Abrasive Flap Disc Type 27 Zirconia 4 Diameter 36 Grit 58 Arbor Regular Thickness  Pack of 1

CGW 42102 Premium Z3 Right Angle Grinder Abrasive Flap Disc, Type 27, Zirconia, 4″ Diameter, 36 Grit, 5/8″ Arbor, Regular Thickness (Pack of 1)

CGW 42102 Premium Z3 Right Angle Grinder Abrasive Flap Disc, Type 27, Zirconia, 4″ Diameter, 36 Grit, 5/8″ Arbor, Regular Thickness (Pack of 1) - Premium zirconia alumina grain with a poly/cotton heat treated backing. Recommended for aggressive use and heavy duty applications. Abrasive flap disc are active grinding agent, provides cool cutting with light pressure. Special optimized resin bond offers maximum cutting capacity, strong edge stability and long life. Use for right angle grinder.

 

Forney 71933 Flap Disc Type 29 Blue Zirconia with 58-Inch-11 Threaded Arbor 120-Grit 4-12-Inch

Forney 71933 Flap Disc, Type 29 Blue Zirconia with 5/8-Inch-11 Threaded Arbor, 120-Grit, 4-1/2-Inch

Forney 71933 Flap Disc, Type 29 Blue Zirconia with 5/8-Inch-11 Threaded Arbor, 120-Grit, 4-1/2-Inch - Multiple layers of zirconia cloth flaps constantly exposing new extra sharp grinding points. Ideal for rough or fine finishing. Blue zirconia flap discs for right angle grinders. Great flexibility for difficult work. Cuts fast and outlast sanding discs 10 to 1 for long life.

 

Weiler Tiger Abrasive Flap Disc Type 29 Threaded Hole Aluminum Backing Zirconia Alumina 4-12 Dia 80 Grit Pack of 1

Weiler Tiger Abrasive Flap Disc, Type 29, Threaded Hole, Aluminum Backing, Zirconia Alumina, 4-1/2″ Dia., 80 Grit (Pack of 1)

Weiler Tiger Abrasive Flap Disc, Type 29, Threaded Hole, Aluminum Backing, Zirconia Alumina, 4-1/2″ Dia., 80 Grit (Pack of 1) - Aluminum backing for rigid support. Threaded hole for attachment to grinding tools. Zirconia alumina abrasive is self-sharpening and more durable than aluminum oxide. Type 29 angled style is more aggressive than type 27 style and is used for weld blending, deburring, deflashing, edge chamfering, stock removal, and grinding and finishing in one step. Designed for use at a 15- to 35-degree angle to dissipate heat.

 

PFERD Polifan SG Abrasive Flap Disc Type 27 Round Hole Phenolic Resin Backing Aluminum Oxide 4-12 Dia 24 Grit Pack of 1

PFERD Polifan SG Abrasive Flap Disc, Type 27, Round Hole, Phenolic Resin Backing, Aluminum Oxide, 4-1/2″ Dia., 24 Grit (Pack of 1)

PFERD Polifan SG Abrasive Flap Disc, Type 27, Round Hole, Phenolic Resin Backing, Aluminum Oxide, 4-1/2″ Dia., 24 Grit (Pack of 1) - Aluminum oxide is a durable abrasive that is suitable for steel, stainless steel, plastic, and wood. Type 27 depressed center flap style is used for surface and edge grinding. Unthreaded round hole for attachment to grinding tools. Phenolic resin backing offers durability and reinforcement. Free of iron, sulphur, and chlorinated fillers, making it safe for use on stainless steel.

 

PFERD Polifan PSF Abrasive Flap Disc Type 29 Threaded Hole Phenolic Resin Backing Zirconia Alumina 4-12 Dia 40 Grit Pack of 1

PFERD Polifan PSF Abrasive Flap Disc, Type 29, Threaded Hole, Phenolic Resin Backing, Zirconia Alumina, 4-1/2″ Dia., 40 Grit (Pack of 1)

PFERD Polifan PSF Abrasive Flap Disc, Type 29, Threaded Hole, Phenolic Resin Backing, Zirconia Alumina, 4-1/2″ Dia., 40 Grit (Pack of 1) - Zirconia alumina abrasive is self-sharpening, more durable than aluminum oxide, and for use on steel and stainless steel. Threaded hole for attachment to grinding tools. Type 29 angled style is more aggressive than type 27 style and is used for weld dressing and edge finishing. Free of iron, sulphur, and chlorinated fillers, making it safe for use on stainless steel. Phenolic resin backing offers durability and reinforcement.

 

Shark F780ZH    7-Inch by 58-11NC Zirconia Flap Disc with Type 27 Grit-80

Shark F780ZH 7-Inch by 5/8-11NC Zirconia Flap Disc with Type 27, Grit-80

Shark F780ZH 7-Inch by 5/8-11NC Zirconia Flap Disc with Type 27, Grit-80 - Available in long life zirconia and aluminum oxide. Type 27 flat shape offers you a new cutting surface again and again.

 

IVY Classic 42207 Flex-Abrasive 4-12-Inch x 78-Inch 60 Grit Coarse Zirconia Flap Disc - Type 29 1-Piece

IVY Classic 42207 Flex-Abrasive 4-1/2-Inch x 7/8-Inch 60 Grit Coarse Zirconia Flap Disc – Type 29, 1-Piece

IVY Classic 42207 Flex-Abrasive 4-1/2-Inch x 7/8-Inch 60 Grit Coarse Zirconia Flap Disc – Type 29, 1-Piece - Disc diameter 4-1/2-inch, arbor 7/8-inch, grit 60, coarse, max rpm 13200. For metal and stainless steel fabrication, blending welds, deburring, cleaning, stripping and finishing, flex-abrasive (registered trademark). Combines grinding capabilities of a depressed center wheel and finishing characteristics of a fiber disc thereby eliminating the switching of tools. Type 29 angled design works at 10 to 25-degree angle, use with angle grinder. Zirconia alumina discs last 20x longer and remove material 3x faster than resin discs.

 

Kassteel Abrasives 67532 Type 27 Flap Discs with 4-12 x 78 Center Hole High Density Blue Zirconia Assorted with 36 40 60 80 120 Pack of 5

Kassteel Abrasives 67532 Type 27 Flap Discs with 4-1/2″ x 7/8″ Center Hole High Density Blue Zirconia Assorted with 36, 40, 60, 80 & 120 (Pack of 5)

Kassteel Abrasives 67532 Type 27 Flap Discs with 4-1/2″ x 7/8″ Center Hole High Density Blue Zirconia Assorted with 36, 40, 60, 80 & 120 (Pack of 5) - Assorted 5-pack, 1 each of 36, 40, 60, 80 & 120. Applications include grinding and polishing of metals, blending of welds and metal finishing. Zirc on y-weight cloth provides extended disc life. Extra flaps in high density discs give more cutting service for a faster cut reducing sanding times.

 

IVY Classic 42203 Flex-Abrasive 4-Inch x 58-Inch 120 Grit Fine Zirconia Flap Disc - Type 29 1-Piece

IVY Classic 42203 Flex-Abrasive 4-Inch x 5/8-Inch 120 Grit Fine Zirconia Flap Disc – Type 29, 1-Piece

IVY Classic 42203 Flex-Abrasive 4-Inch x 5/8-Inch 120 Grit Fine Zirconia Flap Disc – Type 29, 1-Piece - Zirconia alumina discs last 20x longer and remove material 3x faster than resin discs. For metal and stainless steel fabrication, blending welds, deburring, cleaning, stripping and finishing, flex-abrasive (registered trademark). Disc diameter 4-inch, arbor 5/8-inch, grit 120, fine, max rpm 15300. Combines grinding capabilities of a depressed center wheel and finishing characteristics of a fiber disc thereby eliminating the switching of tools. Type 29 angled design works at 10 to 25-degree angle, use with angle grinder.

 

Norton RedHeat Abrasive Flap Disc Type 29 Round Hole Fiberglass Backing CeramicZirconia Alumina 7 Dia 120 Grit Pack of 1

Norton RedHeat Abrasive Flap Disc, Type 29, Round Hole, Fiberglass Backing, Ceramic/Zirconia Alumina, 7″ Dia., 120 Grit (Pack of 1)

Norton RedHeat Abrasive Flap Disc, Type 29, Round Hole, Fiberglass Backing, Ceramic/Zirconia Alumina, 7″ Dia., 120 Grit (Pack of 1) - Ceramic and zirconia alumina blend is a self-sharpening grit that provides excellent performance and operation on stainless steel applications. Full y-weight polyester , resin bonding system with heavy-duty fiber backing for increased strength, durability, absorbs vibration and has good tear resistance. Durable fiberglass backing plate is lightweight, helps absorb vibration, and is high-strength. “supersize” grinding aid provides a cooler cutting and faster cut rate. Type 29 reversed saucer-shape, for aggressive stock removal.

 

Weiler 51167 Tiger Paw XHD Super High Density Abrasive Flap Disc Type 27 Flat Style Phenolic Backing Zirconia Alumina 4-12 Diameter 58-11 Arbor 80 Grit 12000 RPM Pack of 10

Weiler 51167 Tiger Paw XHD Super High Density Abrasive Flap Disc, Type 27 Flat Style, Phenolic Backing, Zirconia Alumina, 4-1/2″ Diameter, 5/8″-11 Arbor, 80 Grit, 12000 RPM (Pack of 10)

Weiler 51167 Tiger Paw XHD Super High Density Abrasive Flap Disc, Type 27 Flat Style, Phenolic Backing, Zirconia Alumina, 4-1/2″ Diameter, 5/8″-11 Arbor, 80 Grit, 12000 RPM (Pack of 10) - Contaminant free cloth contains . Superior grain retention provides maximum aggression on edge.

 

Walter Enduro-Flex Turbo Abrasive Flap Disc Type 29 58-11 Thread Size Plastic Backing Ceramic 4-12 Diameter Grit 3660 Pack of 10

Walter Enduro-Flex Turbo Abrasive Flap Disc, Type 29, 5/8″-11 Thread Size, Plastic Backing, Ceramic, 4-1/2″ Diameter, Grit 36/60 (Pack of 10)

Walter Enduro-Flex Turbo Abrasive Flap Disc, Type 29, 5/8″-11 Thread Size, Plastic Backing, Ceramic, 4-1/2″ Diameter, Grit 36/60 (Pack of 10) - Runs cool due to turbofan backing pad design. Safe to use on all metals, including stainless steel, aluminum and other sensitive alloys. Great for stock removal, edge breaking and blending applications. Long life and high overall material removal. Aggressive grinding thanks to cyclone technology (exclusive abrasive grain blend).

 

PFERD Polifan SG Abrasive Flap Disc Type 27 Threaded Hole Phenolic Resin Backing Zirconia Alumina 4-12 Dia 24 Grit Pack of 1

PFERD Polifan SG Abrasive Flap Disc, Type 27, Threaded Hole, Phenolic Resin Backing, Zirconia Alumina, 4-1/2″ Dia., 24 Grit (Pack of 1)

PFERD Polifan SG Abrasive Flap Disc, Type 27, Threaded Hole, Phenolic Resin Backing, Zirconia Alumina, 4-1/2″ Dia., 24 Grit (Pack of 1) - Threaded hole for attachment to grinding tools. Phenolic resin backing offers durability and reinforcement. Zirconia alumina abrasive is self-sharpening, more durable than aluminum oxide, and for use on steel and stainless steel. Free of iron, sulphur, and chlorinated fillers, making it safe for use on stainless steel. Type 27 depressed center flap style is used for surface grinding and weld finishing.