Black Oxide Alloy Steel Hex Socket Head Cap Screw, Self Locking, #10-32 Thread Size, 3/4″ Length, Fully Threaded (Pack of 25)
- Made in usa. Flange socket cap head is round with a flat top and high profile that provides high strength and has a flange that acts as a washer for use with thin or soft materials. 18-8 stainless steel provides good corrosion resistance and strength, while the plain surface has no finish or coating. Designed with unthreaded grip length to fit the thickness of material being fastened and protect it from thread damage. Hex socket drive has a hexagonal slot that turns using an allen key driver.
Steel Standard U-Style Clip-On Nut, Plain Finish, #10-32 Thread Size, For 0.025″-0.062″ Material Thickness, 0.312″ Edge Distance (Pack of 25)
- Steel is often used in applications where strength is the primary consideration. Clip is u-shaped for a secure hold on both sides of the panel when screwing down. Designed to clip onto panels for quick alignment and a secure hold. Plain surface has no.
Steel Thread Rolling Screw for Metal, Zinc Plated, Serrated Hex Washer Head, #10-32 Thread Size, 1/2″ Length (Pack of 50)
- Steel is often used in applications where strength is the primary consideration. Thread rolling screw recommended for use in metal. Zinc plating resists corrosion and has a reflective appearance. Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening and has six flat sides that a wrench can grip to turn from the side.
Steel Pan Head Machine Screw, Black Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100)
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. Round shanks allow use with a wide variety of toolholding systems. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
Steel Pan Head Machine Screw With Internal-Tooth Lock Washer, Black Oxide Finish, Meets ASME B18.13, #2 Phillips Drive, #10-32 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100)
- Zinc plating resists corrosion and has a reflective appearance. Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening and has six flat sides that a wrench can grip to turn from the side. Thread rolling screw recommended for use in metal. Steel is often used in applications where strength is the primary consideration.
Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 1-1/4″ Length, Fully Threaded, Import (Pack of 100)
- Zinc plating resists corrosion and has a black reflective appearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Steel is often used in applications where strength is the primary consideration. Pan head has a flat top and short vertical sides with a rounded top edge. Thread cutting screw with type 23 point style has fine threads that taper down to a blunt point with a large cutting surface suitable for soft metal, provides excellent chip clearance, and requires minimal rotating force to install.
Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 3/4″ Length, Fully Threaded, Import (Pack of 100)
- Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Round shanks allow use with a wide variety of toolholding systems.
Steel Thread Rolling Screw for Metal, Zinc Plated, Serrated Hex Washer Head, #10-32 Thread Size, 3/8″ Length (Pack of 100)
- Thread rolling screw recommended for use in metal. Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration. Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening and has six flat sides that a wrench can grip to turn from the side.
Steel Thread Rolling Screw for Metal, Black Oxide Finish, Pan Head, Star Drive, #10-32 Thread Size, 3/8″ Length (Pack of 100)
- Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Black oxide finish offers mild corrosion resistance and lubricity. Steel is often used in applications where strength is the primary consideration. Thread rolling screw recommended for use in metal. Pan head has a flat top and short vertical sides with a rounded top edge.
410 Stainless Steel Thread Rolling Screw for Metal, Passivated Finish, Hex Washer Head, #10-32 Thread Size, 1/2″ Length (Pack of 25)
- Hex washer head has a nonserrated flange for additional grip with the mating surface and has six flat sides that a wrench can grip to turn from the side. Thread rolling screw recommended for use in metal. 410 stainless steel has high strength and hardness, and resists corrosion in mild environments. Passivated finish enhances the natural corrosion resistance of stainless steel.
18-8 Stainless Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 1-3/4″ Length, Fully Threaded, Imported (Pack of 25)
- Thread rolling screw recommended for use in metal. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration.
18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Hex Washer Head, Type F, #10-32 Thread Size, 1/2″ Length (Pack of 25)
- Hex washer head has a flange for additional grip with the mating surface and has six flat sides that a wrench can grip to turn from the side. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. 18-8 stainless steel provides good corrosion resistance and strength. Plain surface has no finish or coating.
Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 2-3/4″ Length, Fully Threaded, Imported (Pack of 25)
- Pan head has a flat top and short vertical sides with a rounded top edge. Steel is often used in applications where strength is the primary consideration. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Black oxide finish offers mild corrosion resistance and lubricity. Thread rolling screw recommended for use in metal.
Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 3-1/2″ Length, Fully Threaded, Imported (Pack of 25)
- Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening and has six flat sides that a wrench can grip to turn from the side. Steel is often used in applications where strength is the primary consideration. Thread rolling screw recommended for use in metal. Zinc plating resists corrosion and has a reflective appearance.
Nylon 6/6 Pan Head Machine Screw, Off-White, #2 Phillips Drive, #10-32 Thread Size, 1/4″ Length, Fully Threaded, USA Made (Pack of 100)
- Pan head has a flat top and short vertical sides with a rounded top edge. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Steel is often used in applications where strength is the primary consideration. Black oxide finish offers mild corrosion resistance and lubricity.
Steel Thread Cutting Screw, Black Zinc Plated, Pan Head, Phillips Drive, Type 23, #10-32 Thread Size, 3/4″ Length (Pack of 50)
- Steel is often used in applications where strength is the primary consideration. Thread cutting screw with type 23 point style has fine threads that taper down to a blunt point with a large cutting surface suitable for soft metal, provides excellent chip clearance, and requires minimal rotating force to install. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge. Zinc plating resists corrosion and has a black reflective appearance.
Steel Truss Head Machine Screw, Zinc Plated Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 5/8″ Length, Fully Threaded, Imported (Pack of 100)
- May be used in combination with other components such as hand knob assemblies, toggle shoe clamp assemblies and many other tooling applications. May be used in combination with other components such as knurled head screws, torque thumb screws hand knob assemblies, toggle shoe clamp assemblies and many other tooling applications. Soft, low carbon steel, black oxide finish. Rohs compliant.
18-8 Stainless Steel Prairie Bolt, Plain Finish, Flange Socket Cap Head, Hex Socket Drive, #10-32 Thread Size, 0.190″ Shoulder Diameter, 1-1/8″ Grip Length, Made in US (Pack of 1)
- Designed with unthreaded grip length to fit the thickness of material being fastened and protect it from thread damage. Made in usa. Hex socket drive has a hexagonal slot that turns using an allen key driver. Flange socket cap head is round with a flat top and high profile that provides high strength and has a flange that acts as a washer for use with thin or soft materials. 18-8 stainless steel provides good corrosion resistance and strength, while the plain surface has no finish or coating.
Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Slotted Drive, Type F, #10-32 Thread Size, 1/4″ Length (Pack of 50)
- Slotted drive has a linear slot for use with a flat-blade driver. Hex washer head has a flange for additional grip with the mating surface. Zinc plating resists corrosion and has a reflective appearance. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Steel is often used in applications where strength is the primary consideration.
Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100)
- . They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes.
Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 3/8″ Length, Fully Threaded, Import (Pack of 100)
- They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes.
18-8 Stainless Steel Prairie Bolt, Plain Finish, Flange Socket Cap Head, Hex Socket Drive, #10-32 Thread Size, 0.190″ Shoulder Diameter, 1″ Grip Length, Made in US (Pack of 1)
- Flange socket cap head is round with a flat top and high profile that provides high strength and has a flange that acts as a washer for use with thin or soft materials. Made in usa. Designed with unthreaded grip length to fit the thickness of material being fastened and protect it from thread damage. Hex socket drive has a hexagonal slot that turns using an allen key driver. 18-8 stainless steel provides good corrosion resistance and strength, while the plain surface has no finish or coating.
Nylon 6/6 Thumb Screw, Plain Finish, White, Knurled Head, Flat Point, Meets ASTM D4066/ASTM D6779, 1/2″ Length, Fully Threaded, #10-32 Threads (Pack of 100)
- Tools not necessary for tightening or loosening. Thumb screws allow for simple “by-hand” installation. Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations. Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads. Knurled head provides extra grip for manual tightening.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
