Thread Forming Screws M3 X 6MM (Pack of 4500)
- M3 x. 5 x 6mm thread rolling screw, trilobe point pan head phillips drive steel case hardened zinc cr3 bake wax.
Kodiak Cutting Tools KCT210461 USA Made Roll/Thread Forming Tap, H7 Limit, Plug Style, High Speed Steel, TiN Coated, 5/16-18 Size
- . 318″ shank 1-1/8 thread length 2-23/32″ overall length h7 limit thread forming roll threading tap. 5/16-18 thread forming tap.
M1.2 X 2mm Plastic Thread Forming Screw Stainless Steel Pan Head Phillips Drive (100 Pcs) – M12-20-P-SS-P
- Threaded length 2mm. Thread size m12. Head pan head phillips drive. Thread pitch 045. Material stainless steel.
#8-32 x 5/8 Coarse Thread Taptite Thread Forming Screw Hex Washer Head Low Carbon Steel Zinc Plated Pk 50
- Pictures are representative of item, but are not of the actual item product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc, may differ from picture products are guaranteed to meet the specifications to which they are manufactured specifications allow for tolerances in dimension and shape, which can vary from lot to lot. All asmc industrial fasteners are guaranteed to be of the highest quality. Please see the specifications in the table above for full details if you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order. All asmc industrial fasteners are fully traceable and lot-controlled.
Green Grounding Screws Hex 100 Pack Thread Forming Hex Ground Wire Attachment Multiple Tool Use Hex Head Flat or Phillips Head
- Hex head flat or phillips head. Hex ground wire attachment multiple tool use. Green grounding screws hex 100 pack thread forming.
Kodiak Cutting Tools KCT210527 USA Made Roll Thread Forming Threading Tap, Plug Style, TiN Coated, High Speed Steel, H5 Limit, 3/8-16 Size
- 381″ shank 1-1/4 thread length 2-15/16″ overall length h5 limit thread forming roll threading tap. 3/8-16 thread forming tap.
Union Butterfield 1580(UNC) High-Speed Steel Thread Forming Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, H2 Tolerance, #2-56 Thread Size
- High-speed steel for compatibility with a variety of materials. Available in unc (unified coarse) or unf (unified fine) right-hand thread options for different applications. Cold-forms threads in through holes and blind holes without producing chips. Round shank with square end helps to minimize rotation in the tool holder. Spiral forming lobe pattern for reducing tapping torque.
Drillco 2000N Series 3 Piece Series High Speed Steel Thread Forming Nitro Hand Tap Set, Black Oxide Finish, Round with Square End Shank, 5/16″-18 UNC Thread (Pack of 1)
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Round shanks allow use with a wide variety of toolholding systems. Generates the thread to the bottom. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
Union Butterfield 3306E(UNC) High-Speed Steel Thread Forming Tap, Extra-Long, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, H5 Tolerance, 6 O’all Length, 3/8-16 Thread Size Size: 3/8-16, Model: 1321092
- Available in unc (unified coarse) or unf (unified fine) right-hand thread options for different. Cold-forms threads in through holes and blind holes without producing chips. Extension rol-form tap is extra-long for extended reach, with lubricant grooves to improve coolant. Bottoming chamfer for threading the bottoms of blind holes. High-speed steel for compatibility with a variety of materials.
Kodiak Cutting Tools KCT209669 USA Made Thread Forming Roll Tap, Bottom Style, High Speed Steel, TiN Coated, H2 Limit, 0-80 Size
- 141″ shank 5/16 thread length 1-5/8″ overall length h2 limit thread forming roll threading tap. 0-80 thread forming tap.
M1.4 X 5.5mm Plastic Thread Forming Screw Stainless Steel Pan Head Torx Drive (100 Pcs) – M14-55-P-SS-PT
- Thread pitch 05. Head pan head torx drive. Thread size m14. Threaded length 55mm. Material stainless steel.
Dormer Applix 1681AP High Speed Steel High Performance Thread Forming Multi-Application Lube Grooves Taps, TiN Coated, Round with Square End, Single-End, Semi Bottom, 1/2″ Size, 13 UNC TPI
- Round shanks with square end allow use with a wide variety of toolholding systems. Single end. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Titan TT92871 High Speed Steel Thread Forming Plug Tap, TIN Coated, 1/4″ – 20″, H3 Limit, 0.255″ Shank Diameter, 1″ Thread Length, 2-1/2″ Overall Length
- Features include “lube grooves” for lubrication and venting in blind holes, and a tool life 3-4 times (or more) than cutting taps. For use with brass, copper, lead, stainless steels, carbon steel and leaded steel and zinc. Thread forming taps have no flutes or cutting edges and provide chipless tapping. Ductile materials producing stringy chips are a good candidate for forming. .
Morse Cutting Tools 36381 Thread Forming Taps, High-Speed Steel, Bright Finish, Bottoming Style, H3 Pitch Diameter Limit, #4-40 Size
- Recommended for a wide variety of ductile materials. Thread forming taps cold form rather than cut the threads. Advantages include no chips to dispose of, stronger higher quality threads, increased tapping speeds, longer tap life and reduced tap breakage. Lube grooves provide a path for lubrication and act as vents to relieve pressure in blind hole tapping.
#8-32 x 1/4 Coarse Thread Taptite Thread Forming Screw Phillips Hex Washer Head with Serration Low Carbon Steel Zinc Plated Pk 100
- All asmc industrial fasteners are fully traceable and lot-controlled. Pictures are representative of item, but are not of the actual item product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc, may differ from picture products are guaranteed to meet the specifications to which they are manufactured specifications allow for tolerances in dimension and shape, which can vary from lot to lot. All asmc industrial fasteners are guaranteed to be of the highest quality. Please see the specifications in the table above for full details if you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order.
Titan TT92808 High Speed Steel Thread Forming Bottom Tap, TIN Coated, 2″ – 56″, H2 Limit, 0.141″ Shank Diameter, 7/16″ Thread Length, 1-3/4″ Overall Length
- Thread forming taps have no flutes or cutting edges and provide chipless tapping. Features include “lube grooves” for lubrication and venting in blind holes, and a tool life 3-4 times (or more) than cutting taps. For use with brass, copper, lead, stainless steels, carbon steel and leaded steel and zinc. Ductile materials producing stringy chips are a good candidate for forming. .
M1.4 X 4mm Plastic Thread Forming Screw Zinc Plated Steel Pan Head Torx Drive (100 Pcs) – M14-40-P-Z-PT
- Material zinc plated steel. Thread pitch 03. Thread size m14. Threaded length 6mm. Head pan head torx drive.
Dormer E064 Powdered Metal Thread Forming Tap, Gold Oxide Finish, Round Shank With Square End, Modified Bottoming Chamfer, #6-32 Thread Size
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. Powdered metal substrate offers superior performance that approaches that of solid carbide tools but with the toughness and shock-reistance of high-speed steel.
Morse Cutting Tools 96453 Thread Forming Taps, High-Speed Steel, Titanium Nitride Finish, Bottom Style, D8 Pitch Diameter Limit, M6 x 1.00 Size
- Thread forming taps cold form rather than cut the threads. Advantages include no chips to dispose of, stronger higher quality threads, increased tapping speeds, longer tap life and reduced tap breakage. Lube grooves provide a path for lubrication and act as vents to relieve pressure in blind hole tapping. Recommended for a wide variety of ductile materials. .
Thread Forming Tap, Mbot, VC10, TiCN, #2-56
- 141″. This thread forming tap comes with modified bottoming type and high performance style. It is made of vc-10 material, finish ticn, size #2, pitch 56, thread unc, pitch diameter limit is h2, standard projection, shank diameter is 0. Ideal for use with aluminum, low to high carbon steel, die steel and stainless steel, tolerance 3b, ansi standards 14050.
Morse Cutting Tools 36390 Thread Forming Taps, High-Speed Steel, Bright Finish, Bottoming Style, H5 Pitch Diameter Limit, #6-32 Size
- Recommended for a wide variety of ductile materials. Thread forming taps cold form rather than cut the threads. Lube grooves provide a path for lubrication and act as vents to relieve pressure in blind hole tapping. . Advantages include no chips to dispose of, stronger higher quality threads, increased tapping speeds, longer tap life and reduced tap breakage.
Union Butterfield 3300(M) High-Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, M4-0.70 Thread Size
- High-speed steel for compatibility with a variety of materials. Produces ansi standard right-hand threads in metric sizes. Round shank with square end helps to minimize rotation in the tool holder. Cold-forms threads in through holes and blind holes without producing chips. Rol-form design includes oil grooves in larger sizes to improve coolant flow.
Thread Forming Screw, Pan, #0-42, 3/8L, PK50
- Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Steel is often used in applications where strength is the primary consideration. Thread rolling screw recommended for use in plastic. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Zinc plating resists corrosion and has a reflective appearance.
OSG Tap And Die – 1405010808 – Tap, Right Hand, Thread Forming, 3/8-16, Powdered Metal, TiCN Finish
- This osg exotap® nrt® high-performance form tap is suitable for use with materials less than 32 rc. Thread rolling screw recommended for use in plastic. Black oxide finish offers mild corrosion resistance and lubricity. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Steel is often used in applications where strength is the primary consideration.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
