21 Most Wanted Collet Sizes

 

G CAPORALI SRL 5C Square Collet - Size 14 EXTERNAL THREAD 1240 x 20 RH INTERNAL THREAD 1047 x 24 RH

G. CAPORALI SRL 5C Square Collet – Size: 1/4″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH

G. CAPORALI SRL 5C Square Collet – Size: 1/4″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH - Precision ground to close tolerance. Made of highest grade steel available.

 

T&O ER-16 Collet Chuck - Taper 12 Straight Shank Shank Length  4 COLLET SIZE ER-16

T&O ER-16 Collet Chuck – Taper: 1/2″ Straight Shank Shank Length : 4″ COLLET SIZE: ER-16

T&O ER-16 Collet Chuck – Taper: 1/2″ Straight Shank Shank Length : 4″ COLLET SIZE: ER-16 - Made of highest grade steel available. Clamping nut diameter 7/8″.

 

G CAPORALI SRL 5C Square Collet - Size 1116 EXTERNAL THREAD 1240 x 20 RH INTERNAL THREAD 1047 x 24 RH

G. CAPORALI SRL 5C Square Collet – Size: 11/16″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH

G. CAPORALI SRL 5C Square Collet – Size: 11/16″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH - Precision ground to close tolerance. Made of highest grade steel available.

 

Techniks 1911-4036 0-6 ANSI Rigid Tap Collet Size 1

Techniks 19/11-4036 0-6″ ANSI Rigid Tap Collet Size 1

Techniks 19/11-4036 0-6″ ANSI Rigid Tap Collet Size 1 - For ansi tap sizes 0-#6 & m16-m35 metric shanks. For use with size 1 holders. Quick-change style. Change worn taps in seconds. Our part # tec-19/11-4036.

 

QA-1 Quick Change Tap AdapterCollet Size 1 Tap size 14 or 14

QA-1 Quick Change Tap Adapter/Collet Size 1 (Tap size 14 or 1/4″)

QA-1 Quick Change Tap Adapter/Collet Size 1 (Tap size 14 or 1/4″) - When paired with quick change holders, these greatly reduce change-over time. The qa-1 is a rigid (no clutch) quick change positive drive tap adaptor that is ideal for mass production tapping applications. Equivalent to collis # 78915 us shop tools # bz00-025p techniks # 19/11-4063.

 

T&O ER-40 Spring Collet Chuck Set - Taper 40 NS COLLET SIZE ER-40

T&O ER-40 Spring Collet Chuck Set – Taper: 40 N.S. COLLET SIZE: ER-40

T&O ER-40 Spring Collet Chuck Set – Taper: 40 N.S. COLLET SIZE: ER-40 - Tools never get stuck in holder due to “built-in self-releasing system”. A must when you need to hold tools accurately and rigidly. Unique 8° taper affords highest gripping power. Concentricity guaranteed to 0005″. Wide holding range of 0394″ on each collet.

 

G CAPORALI SRL 5C Square Collet - Size 58 EXTERNAL THREAD 1240 x 20 RH INTERNAL THREAD 1047 x 24 RH

G. CAPORALI SRL 5C Square Collet – Size: 5/8″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH

G. CAPORALI SRL 5C Square Collet – Size: 5/8″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH - Precision ground to close tolerance. Made of highest grade steel available.

 

TTC Production R8 Round Collet - SIZE 1

TTC Production R8 Round Collet – SIZE: 1″

TTC Production R8 Round Collet – SIZE: 1″ - Hardened and ground. Thread 7/16″-30. Runout 0005″.

 

Techniks 1911-4063 14 ANSI Rigid Tap Collet Size 1

Techniks 19/11-4063 1/4″ ANSI Rigid Tap Collet Size 1

Techniks 19/11-4063 1/4″ ANSI Rigid Tap Collet Size 1 - Change worn taps in seconds. Quick-change style. Our part # tec-19/11-4063. Foransi tap sizes 1/4″ & m6, m63 metric shanks. For use with size 1 holders.

 

T&O ER-40 Spring Collet Chuck Set - Taper 5 MT COLLET SIZE ER-40

T&O ER-40 Spring Collet Chuck Set – Taper: 5 MT COLLET SIZE: ER-40

T&O ER-40 Spring Collet Chuck Set – Taper: 5 MT COLLET SIZE: ER-40 - Wide holding range of 0394″ on each collet. Unique 8° taper affords highest gripping power. Tools never get stuck in holder due to “built-in self-releasing system”. A must when you need to hold tools accurately and rigidly. Concentricity guaranteed to 0005″.

 

TTC 5C Hex Collet - Size 18 EXTERNAL THREAD 1240 x 20 RH INTERNAL THREAD 1047 x 24 RH

TTC 5C Hex Collet – Size: 1/8″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH

TTC 5C Hex Collet – Size: 1/8″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH - Made of highest grade steel available. Precision ground to close tolerance.

 

T&O ER-40 Spring Collet Chuck Holder - Taper 1-14Straight Shank COLLET SIZE ER-40

T&O ER-40 Spring Collet Chuck Holder – Taper: 1-1/4″Straight Shank COLLET SIZE: ER-40

T&O ER-40 Spring Collet Chuck Holder – Taper: 1-1/4″Straight Shank COLLET SIZE: ER-40 - Concentricity guaranteed to 0005″. Unique 8° taper affords highest gripping power. Wide variety of holders to be used on various machine tools. A must when you need to hold tools accurately and rigidly. Wide holding range of 0394″ on each collet.

 

TTC 5C Hex Collet - Size 34 EXTERNAL THREAD 1240 x 20 RH INTERNAL THREAD 1047 x 24 RH

TTC 5C Hex Collet – Size: 3/4″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH

TTC 5C Hex Collet – Size: 3/4″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH - Made of highest grade steel available. Precision ground to close tolerance.

 

5-C Expanding Collets Size 3  750 - 1437 Range 1-12 Dia  1 Lgth  750 Min Mach Dia

5-C Expanding Collets Size: 3 / .750 – 1.437″ Range (1-1/2″ Dia. / 1″ Lgth. / .750″ Min. Mach Dia.)

5-C Expanding Collets Size: 3 / .750 – 1.437″ Range (1-1/2″ Dia. / 1″ Lgth. / .750″ Min. Mach Dia.) - Machinable to any configuration within their stock and minimum machinable diameters. Allows “internal chucking” within the range. Once seated in spindle and machined to size, these collets can hold concentricity well within. 0005″. 0005″. The most effective and accurate means of internal chucking for short runs to mass production. 750″ through 1. Applicable on any manual or cnc lathe, milling machine or grinder with a 5c spindle. 437″. Heads are machinable. Shanks are precision ground to maintain concentricity with +/-.

 

T&O ER-16 Mini milling drilling extension set - Taper 34 Straight Shank Length  6 COLLET SIZE ER-16

T&O ER-16 Mini milling & drilling extension set – Taper: 3/4″ Straight Shank Length : 6″ COLLET SIZE: ER-16

T&O ER-16 Mini milling & drilling extension set – Taper: 3/4″ Straight Shank Length : 6″ COLLET SIZE: ER-16 - Short collet design for less overhang and prevents tool breakage. Concentricity 0004″ at 2″ from collet line. Small nose diameter for hard to reach places. Capacity 020″, 393″. Range per collet 0394″.

 

T&O ER-40 Spring Collet Chuck Set - Taper R8 COLLET SIZE ER-40

T&O ER-40 Spring Collet Chuck Set – Taper: R8 COLLET SIZE: ER-40

T&O ER-40 Spring Collet Chuck Set – Taper: R8 COLLET SIZE: ER-40 - Tools never get stuck in holder due to “built-in self-releasing system”. A must when you need to hold tools accurately and rigidly. Unique 8° taper affords highest gripping power. Wide holding range of 0394″ on each collet. Concentricity guaranteed to 0005″.

 

TTC 5C Hex Collet - Size 716 EXTERNAL THREAD 1240 x 20 RH INTERNAL THREAD 1047 x 24 RH

TTC 5C Hex Collet – Size: 7/16″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH

TTC 5C Hex Collet – Size: 7/16″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH - Precision ground to close tolerance. Made of highest grade steel available.

 

Warrior Free Shipping 10pcs Tig Collet 10N24 size 332 24mm50mm Copper material

Warrior Free Shipping 10pcs Tig Collet 10N24 size 3/32″ 2.4mm*50mm Copper material

Warrior Free Shipping 10pcs Tig Collet 10N24 size 3/32″ 2.4mm*50mm Copper material - 4mm50mm material copper package including 10pcs 2. Details suitable for wp-17/18/26 tig welding torch tig parts 10n24, size 3/32″ 2. 4mm 10n24.

 

TTC Hex for 5C Collets - Size Hex

TTC Hex for 5C Collets – Size: Hex

TTC Hex for 5C Collets – Size: Hex - Precision ground, parallel and square to within 0005″. Capacity 1/16″ thru 1-1/8″. For simplified set-ups on drill presses, milling machines, lathes and surface grinders. Made of high quality tool steel, hardened. Quick acting collet closer (#cb5l) is interchangeable on either collet block.

 

TTC 5C Hex Collet - Size 14 EXTERNAL THREAD 1240 x 20 RH INTERNAL THREAD 1047 x 24 RH

TTC 5C Hex Collet – Size: 1/4″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH

TTC 5C Hex Collet – Size: 1/4″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH - Precision ground to close tolerance. Made of highest grade steel available.

 

TTC 5C Hex Collet - Size 78 EXTERNAL THREAD 1240 x 20 RH INTERNAL THREAD 1047 x 24 RH

TTC 5C Hex Collet – Size: 7/8″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH

TTC 5C Hex Collet – Size: 7/8″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH - Made of highest grade steel available. Precision ground to close tolerance.