18-8 Stainless Steel Pan Head Machine Screw, Black Oxide Finish, Meets DIN 7985, #3 Phillips Drive, M6-1 Thread Size, 25 mm Length, Fully Threaded, Imported (Pack of 25)
- Wire cable with loop for convenient hanging. Metric gauges are black oxide. Accurate and easy-to-use thread verifier for both nuts and bolts. Thread sizes are permanently stamped on each gauge. Each included size has a nut and bolt checker on the same gauge.
McGard 65554GD Chrome/Gold SplineDrive Wheel Installation Kit (M12 x 1.25 Thread Size) – for 5 Lug Wheels
- Every lug nut and wheel lock is fully machined from restricted chemistry steel made specifically for mcgard and through-hardened for its unsurpassed level of safety. Like all mcgard lug nuts, the chrome/gold plating is guaranteed for life not to rust, chip or peel. The convenient way to order tuner wheel locks and lug nuts. Mcgard manufactures wheel locks and lug nuts in the usa to meet or exceed oem standards for safety and durability. A no-compromise design engineered to fit small diameter recesses in tuner style wheels. Kit contains all the hardware that you need to install 4 wheels and tires. Splinedrive lug nuts combine style and performance. This product may contain globally sourced materials/components. Splinedrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30 percent lighter in weight. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. The computer generated key designs allow for an infinite number of key patterns.
Steel Fully Threaded Rod, Galvanized, 3/4″-10 Thread Size, 72″ Length, Right Hand Threads
- Steel is often used in applications where strength is the primary consideration. Both have threads along part or all of their length. It is galvanized for corrosion resistance. Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components. Studs are also available with a perforated base, weld projections, or a press-in captive head for securing to the surface of a component. The difference between rods and studs is length in general, a stud is up to 1 foot long, and a rod is more than 1 foot long. This fully threaded rod is made of galvanized steel, has 3/4″-10 right-hand threads, and is 72″ long. Those that are partially threaded have equal or unequal thread lengths on one or both ends.
WYNNsky Industrial Air Plug Set, 3/8 Inch Body Size, 3/8 Inch NPT Male Threads Size, 20 Pieces Steel Air Compressor Accessories Fittings
- Max working pressure of 300psi. General using this plug can be connected with other brands’ coupler if the type and body size is same. Steel material features higher corrosion resistance and longer life than aluminum material. Wynnsky we’re committed to providing outstanding value, top customer service and long-lasting, high-quality products to our customer. Plug specifications industrial style plug, 3/8 inch body size, 3/8 inch male threads size.
Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Slotted Drive, Type F, 5/16″-18 Thread Size, 1″ Length (Pack of 25)
- Steel is often used in applications where strength is the primary consideration. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Zinc plating resists corrosion and has a reflective appearance. Slotted drive has a linear slot for use with a flat-blade driver. Hex washer head has a flange for additional grip with the mating surface.
Gorilla Automotive 76644N “The System” Duplex Acorn Wheel Locks (14mm x 1.50 Thread Size) – For 6 Lug Wheels
- An external security pattern makes the gorilla lock virtually impossible to remove without the matching key. The original design that set the standard for wheel security, gorilla locks are the most advanced and unique locks on the market today. Made from case-hardened steel and chrome plated for lasting beauty, these locks are designed for unsurpassed security.
Hilitchi 460-Piece Alloy Steel Socket Cap Screws Hex Head Bolt Nuts Assortment Kit with Box, M3 M4 M5 Thread Size, Black Oxide Finish
- Material high quality 129 grade alloy steel different size m4 m5 m6. Package quantity 460-piece. This set is organized by size / type in a transparent storage case for quick access and protection. High quality hex socket head cap screws nuts kit. Drive type hex socket head style flat head.
Steel Pan Head Machine Screw, Black Oxide Finish, Meets DIN 7985, #3 Phillips Drive, M6-1 Thread Size, 35 mm Length, Fully Threaded, Import (Pack of 50)
- Long life and high overall material removal. Aggressive grinding thanks to cyclone technology (exclusive abrasive grain blend). Great for stock removal, edge breaking and blending applications. Runs cool due to turbofan backing pad design. Safe to use on all metals, including stainless steel, aluminum and other sensitive alloys.
1/4-20 x 1-1/2″ Button Head Torx Security Machine Screw Bolt Screws Stainless Steel Tamper Resistant, Qty 10 Thread Size 1/4-20 x 1-1/2″ Length by Fastenere
- These tamper resistant screws are suitable for providing tamperproof fastening for a wide range of applications. Fastenere specialize in tamper resistant screws as well as security fasteners, spanners, nuts, bolts and more. Tamper pruf resistant screws will allow you to save thousands of dollars by protecting you from such things as theft, vandalism, corrosion, and tampering. Our tamper resistant screws provide a higher level of security for you with their drive design, which prevents removal with normal screw drivers. , We supply the toughest and most durable security screws around. We offer a large number of head-styles, driver kits and matching tools for installation and removal. They are available in both sheet metal and machine threads. At fastenere inc.
18-8 Stainless Steel Fully Threaded Rod, Meets DIN 975, M12-1.75 Thread Size, 1 m Length, Right Hand Threads
- Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components. The material may be slightly magnetic. The difference between rods and studs is length in general, a stud is up to 1 foot long, and a rod is more than 1 foot long. Studs are also available with a perforated base, weld projections, or a press-in captive head for securing to the surface of a component. Both have threads along part or all of their length. 75 right-hand threads, and is 1 m long. Those that are partially threaded have equal or unequal thread lengths on one or both ends. It meets deutsches institut für normung (din) 975 specifications. This fully threaded rod is made of 18-8 stainless steel for corrosion resistance, has m12-1.
Gorilla Automotive 21122HT Small Diameter Acorn Chrome 4 Lug Kit (12mm x 1.25 Thread Size ) – Pack of 16
- Available in all popular styles and sizes. Gorilla automotive carries a complete line of lug nuts with unfailing quality and finish controlled through every step of manufacturing to deliver lug nuts that outperform. Gorilla features lug nuts with long lasting durability and precision engineered to meet manufacturer’s specification.
RAYS W1712125B Black (M12 x 1.25 Thread Size) Hex Lock and Nut Set
- 210″ overall length/110″ thread length. 16 pieces nut with 4 locks. Cone seat. Set of 20 bolt lugs with key. 17mm & 19mm dual hex key.
410 Stainless Steel Self-Drilling Screw, Plain Finish, Modified Truss Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 1″ Length (Pack of 25)
- Modified truss head is extra wide with a low-profile dome and integral round washer. Plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments.
POWERTEC QTB1008 T-Slot Bolts 1/4″-20 Thread Size T-Bolt 1.5 Inch Long – 20 Pack
- Bolt size and thread length 1 5″ | t-shaped heads 13/16″ by 17/32″ by 7/64″ thick | 1/4″-20 all thread. Includes (20) tee bolts 1/4″-20 thread bolt and 1-1/2 long. Design able to withstand strong torque with heavy usage, and won’t easily strip, nor over-tighten. Function essential jig and fixture hardware designed with precision machined t-heads that fit inside routed grooves and t-slots, allowing the tightening and customization of your own jigs an easy task. Quality t-bolts are made from high quality stainless steel and zinc plated for corrosion resistance, rust protection and long lasting durability.
Steel Self-Drilling Screw, Black Phosphate Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 3/4″ Length (Pack of 100)
- Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Steel is often used in applications where strength is the primary consideration. Modified truss head is extra wide with a low-profile dome and integral round washer. Black phosphate coating provides corrosion resistance and lubricity.
Gorilla Automotive 91733 Acorn Bulge Chrome Lug Nut and Lock System (12mm x 1.50 Thread Size)
- The best selling gorilla locks and lug nuts are combined into one convenient and economical package. Lug wrench adapter also included. Each chrome lug nut and lock system includes 16 lug nuts and 4 wheel locks.
Class 4.6 Steel Fully Threaded Rod, M12-1.75 Thread Size, 1 m Length, Right Hand Threads
- 6 steel, has m12-1. Both have threads along part or all of their length. The difference between rods and studs is length in general, a stud is up to 1 foot long, and a rod is more than 1 foot long. Class 4. Those that are partially threaded have equal or unequal thread lengths on one or both ends. 6 steel, composed of either low or medium carbon steel, is often used in applications where toughness is the primary consideration. Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components. This fully threaded rod is made of class 4. 75 right-hand threads, and is 1 m long. Studs are also available with a perforated base, weld projections, or a press-in captive head for securing to the surface of a component.
Gorilla Automotive 41187B Acorn Bulge Seat Lug Nuts (1/2″ Thread Size)
- Available for all popular styles and sizes. Gorilla automotive carries a complete line of lug nuts with unfailing quality and finish controlled through every step of manufacturing to deliver lug nuts that outperform. Gorilla features lug nuts with long lasting durability and precision engineered to meet manufacturer’s specification.
ROADFAR 24pcs Wheel Lug Nuts M14x2.0 Thread-Size Close End Compatible with Ford Expedition/Ford F-150/Lincoln Mark LT/Lincoln Navigator 1997-2014 with 2 Keys
- Black chrome lug nuts replacement for, ford expedition/ford f-150/lincoln mark lt/lincoln navigator 1997-2014(please refer to the compatibility list for details). Screw nuts function, nuts are made up of two parts, each of which has a staggered cam, because the internal wedge design slope angle is larger than that of bolts, this combination will closely bite into a whole when vibration occurs, the raised part of anti-loosening nut staggers with each other, resulting in lifting tension, so as to achieve perfect anti-loosening effect. Wheel nuts specifications, 14×20 thread size, 15cm(length)11cm(width)8cm(height), 51mm tall, 3/4″ hex size, close end bulge acorn style. After-sale warranty, 12-months defects liability period and professional customer service center to provide technical assistance for you. Premium material, our lug nuts are made of cnc billet aluminum, which is conical seat with strength beauty and great fastening function.
WYNNsky Air Hose Fittings, AMT Universal Air Coupler and I/M Industrial Type Air Plug Kit, 1/4 Inch Threads Size, 1/4 Inch Body Size, 14 Pieces Air Compressor Accessories Fittings Kit
- Prodcut design there is six locking balls in the coupler which hold the plug securely, push-on style coupler, insert plug into coupler for fully automatic, quick coupling action without pulling sleeve back. Product using universal coupler accept the three most popular interchange, i/m, aro and t type, which is perfect for shops where multiple plugs are used. Material body of the coupler is made of aluminium with red coating, sleeve of the coupler is made of aluminium with black coating, the plug is made of aluminium with red coating. Common using the standardized fittings can be used universally, which are interchangeable and compatible with other manufacturers. Product including 2pcs 1/4 inch fnpt universal air coupler, 2pcs 1/4 inch mnpt universal air coupler with 1/4 inch body size, 6pcs 1/4 inch mnpt air plug, 4pcs 1/4 inch fnpt air plug, all air couplers and plugs are 1/4 inch body size which is most common size.
McGard 65610BK SplineDrive Black (M14 x 1.5 Thread Size) Wheel Installation Kit for 6-Lug Wheels
- The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. Like all mcgard lug nuts, the chrome/black plating is guaranteed for life not to rust, chip or peel. Splinedrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. Every lug nut and wheel lock is fully machined from restricted chemistry steel made specifically for mcgard and through-hardened for its unsurpassed level of safety. Contains all the hardware that you need to install 4 wheels and tires. A no-compromise design engineered to fit small diameter recesses in tuner style wheels. The convenient way to order tuner wheel locks and lug nuts. Why settle for ordinary lug nuts splinedrive lug nuts combine style and performance. The computer generated key designs allow for an infinite number of key patterns. In addition they are 30 percent lighter in weight. Mcgard manufactures wheel locks and lug nuts in the usa to meet or exceed oem standards for safety and durability. This product may contain globally sourced materials/components.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
