19 Greatest Power Drill Augers

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Single-spur cutting edge scribes the circumference of the hole for a smoother finish. Full-length heat treatment guards against bending and strengthens the twist. Fast boring in hard and soft woods bits have a 4-1/2″ twist length and a 7-1/2″ overall length. Wide lands keep the bit straight as it bores through the hole. Solid center design provides extra rigidity while boring.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Solid center design provides extra rigidity while boring. Coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2-inch twist length and a 7-1/2-inch overall length. Single-spur cutting edge scribes the circumference of the hole for a smoother finish. Wide lands keep the bit straight as it bores through the hole the flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter, producing a faster, cleaner cut.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Wide lands keep the bit straight as it bores through the hole. Full-length heat treatment guards against bending and strengthens the twist. Single-spur cutting edge scribes the circumference of the hole for a smoother finish. Solid center design provides extra rigidity while boring. Fast boring in hard and soft woods bits have a 4-1/2″ twist length and a 7-1/2″ overall length.

 

3 Pack Irwin 43805 Power Drill Auger Bit Extension

3 Pack Irwin 43805 Power Drill Auger Bit Extension

3 Pack Irwin 43805 Power Drill Auger Bit Extension - 11/16″. Irwin 43805 auger bit extensions extension adds 18″ to regular bit length six-flatted shank provides better chuck grip and reduces slippage hex key included compatible 5/16″ hex auger 23/64″ minimum hole dia.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Full-length heat treatment guards against bending and strengthens the twist. Single-spur cutting edge scribes the circumference of the hole for a smoother finish. Fast boring in hard and soft woods bits have a 4-1/2″ twist length and a 7-1/2″ overall length. Wide lands keep the bit straight as it bores through the hole. Solid center design provides extra rigidity while boring.

 

I-100 Power Drill Auger Bit by Irwin Tools

I-100 Power Drill Auger Bit by Irwin Tools

I-100 Power Drill Auger Bit by Irwin Tools - Solid center design provides extra rigidity while boringwide lands keep the bit straight as it bores through the holesingle-spur cutting edge scribes the circumference of the hole for a smoother finishfast boring in hard and soft woods. Bits have a 4-1/2 twist length and a 7-1/2 overall lengthfull-length heat treatment guards against bending and strengthens the twist.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Solid center design provides extra rigidity while boring. Single-spur cutting edge scribes the circumference of the hole for a smoother finish. Fast boring in hard and soft woods bits have a 4-1/2″ twist length and a 7-1/2″ overall length. Wide lands keep the bit straight as it bores through the hole. Full-length heat treatment guards against bending and strengthens the twist.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Solid center design provides extra rigidity while boring. Wide lands keep the bit straight as it bores through the hole. Fast boring in hard and soft woods bits have a 4-1/2″ twist length and a 7-1/2″ overall length. Full-length heat treatment guards against bending and strengthens the twist. Single-spur cutting edge scribes the circumference of the hole for a smoother finish.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - #i-100, 7/16″ solid center auger bit, 4-1/2″ twist length, 7-1/2″ overall length, provides extra rigidity while boring, wide lands keep the bit straight as it bores through the hole, the flutes are ground behind the lands to funnel the chips to the.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Fast boring in hard and soft woods bits have a 4-1/2″ twist length and a 7-1/2″ overall length. Solid center design provides extra rigidity while boring. Wide lands keep the bit straight as it bores through the hole. Single-spur cutting edge scribes the circumference of the hole for a smoother finish. Full-length heat treatment guards against bending and strengthens the twist.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Single-spur cutting edge scribes the circumference of the hole for a smoother finish. Solid center design provides extra rigidity while boring. Coarse screw point provides fast boring in hard and soft woods. Wide lands keep the bit straight as it bores through the hole the flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter, producing a faster, cleaner cut. All bits have a 4-1/2-inch twist length and a 7-1/2-inch overall length.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Wide lands keep the bit straight as it bores through the hole. Fast boring in hard and soft woods bits have a 4-1/2″ twist length and a 7-1/2″ overall length. Single-spur cutting edge scribes the circumference of the hole for a smoother finish. Full-length heat treatment guards against bending and strengthens the twist. Solid center design provides extra rigidity while boring.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Full-length heat treatment guards against bending and strengthens the twist. Wide lands keep the bit straight as it bores through the hole. Solid center design provides extra rigidity while boring. Fast boring in hard and soft woods bits have a 4-1/2″ twist length and a 7-1/2″ overall length. Single-spur cutting edge scribes the circumference of the hole for a smoother finish.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Fast boring in hard and soft woods bits have a 4-1/2″ twist length and a 7-1/2″ overall length. Wide lands keep the bit straight as it bores through the hole. Full-length heat treatment guards against bending and strengthens the twist. Solid center design provides extra rigidity while boring. Single-spur cutting edge scribes the circumference of the hole for a smoother finish.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - All bits have a 4-1/2″ twist length and a 7-1/2″ overall length. Single spur cutting edge scribes the circumference of the hole coarse screw point provides fast boring in hard and soft woods. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Solid center design provides extra rigidity while boring. Fast boring in hard and soft woods bits have a 4-1/2″ twist length and a 7-1/2″ overall length. Wide lands keep the bit straight as it bores through the hole. Single-spur cutting edge scribes the circumference of the hole for a smoother finish. Full-length heat treatment guards against bending and strengthens the twist.

 

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit

I-100 Power Drill Auger Bit - Solid center design provides extra rigidity while boring. Wide lands keep the bit straight as it bores through the hole the flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter, producing a faster, cleaner cut. All bits have a 4-1/2-inch twist length and a 7-1/2-inch overall length. Coarse screw point provides fast boring in hard and soft woods. Single-spur cutting edge scribes the circumference of the hole for a smoother finish.

 

Irwin 43805 Power Drill Auger Bit Extension by Irwin Tools

Irwin 43805 Power Drill Auger Bit Extension by Irwin Tools

Irwin 43805 Power Drill Auger Bit Extension by Irwin Tools - Irwin 43805 auger bit extensions extension adds 18″ to regular bit length six-flatted shank provides better chuck grip and reduces slippage hex key included compatible 5/16″ hex auger 23/64″ minimum hole dia. 11/16″.

 

I-100 Power Drill Auger Bit by Irwin Tools

I-100 Power Drill Auger Bit by Irwin Tools

I-100 Power Drill Auger Bit by Irwin Tools - Bits have a 4-1/2 twist length and a 7-1/2 overall lengthfull-length heat treatment guards against bending and strengthens the twist. Solid center design provides extra rigidity while boringwide lands keep the bit straight as it bores through the holesingle-spur cutting edge scribes the circumference of the hole for a smoother finishfast boring in hard and soft woods.