Kett Tool: 250-5 (1/4″ Jacobs chuck)
- Specifications head 250-5 ( 1/4 jacobs chuck). Description this is a jacobs chuck that goes with pd-1001 pneumatic drill. The chuck can me mated to most pneumatic and electric drills.
Kett Tool Kit #400 (PN-1020 & 42-20)
- It can make tight curves up to 5/8 raduis. It will cut 18 gauge mild steel and most grades of stainless to 20 gauge at 40 per minute. Description at home on intricate curves on flat or corrugated metal, one hand is all it takes to make perfect cuts every time. Specifications head 1020 head 42-20 shear attachment motor 253-58 cattying case 251-4. The variable speed, 90 psi, pneumatic motor, cuts up to 2500 rpm. This kit now has new pn-1020 nibbler using the 253-58 motor with ergonomic handle.
Kett Tool Saw Blade: 2-1/2″ (157-610) 12 pack
- Number of teeth 100 tpi 0. 06 bore 7/16 maximum depth of cut 5/8 blade cuts the following materials mild steel 24 gauge and lighter fiberglass.
Kett Tool Carbide Grit saw blade 3-12″ (157-800)
- Carbide grit saw blade bore 7/16 depth of cut 1-1/16 blade cuts the following materials fiberglass plastics, plain as lucite, plexiglas and decorative laminates as consoweld, formica, micarta, texolite and panelyte.
Kett Tool Saw Blade: 3-1/2″ (157-810) 12 pack
- 09 bore 7/16 maximum depth of cut 1-1/16 blade cuts the following materials hard aluminum fiberglass alliance wall, color wall, mirawal and similar single faced metal laminated panels plastics, plain as lucite, plexiglas and decorative laminates as consoweld, formica, micarta, texolite and panelyte. Number of teeth 100 tpi 0.
Kett Tool 46-20L Complete 18 Gauge Profile Shear Head, Left Hand Cutting
- Kett 46-20l shear head for the kd-446l profile shear with left hand blades. Cuts profile and flat materials up to 18 gauge, spiral duct, wire mesh and many other materials. The blades are made of high quality steel, heat treated and precision ground. . These snips are extremely light and maneuverable at 5 pounds, the kd-446l can cut tight curves at a radius of three inches.
Kett Tool Saw Blade: 3-1/2″ (157-86) 12 pack
- 16 bore 7/16 maximum depth of cut 1-1/16 blade cuts the following materials fiberglass plywood, hardboard, pressed board, etc. Plastics, plain as lucite, plexiglas and decorative laminates as consoweld, formica, micarta, texolite and panelyte. Number of teeth 60 tpi 0.
Kett Tool 70-20 Shear Head
- Description scissor shear head top stationary blade, used on kd-270, p-570, p-1070 and discontinued k-170 and k-270 shears. .
Kett Tool 41-20 Shear Head
- Description 24 gauge steel scissor shear head, used on kd-441 , p-541, p-1041 , km-441 and discontinued e-141 and kc-141 shears. .
Kett Tool KC102 Intermediate 18 Gauge Blade Kit F & K200
- Item weight, 001 lbs. Great gift idea. Package quantity 1. Satisfaction ensured. Excellent quality.
Kett Tool AN3500 Heavy Duty Electric Nibbler
- The hn2 uses a 1-1/4 horsepower, 6 amp electric motor that cuts 10 gauge c. R. The plunger, die holder and punch have been completely re-designed a screw-on punch retainer provides easy access to the punch. Just unfasten two screws and pick out the punch from the external t-slot. The bronze slider has been replaced by a heavy-duty roller bearing. Replacing the punch is now a breeze, no more tedious aligning access holes and working inside the tool. It also serves as an additional support when servicing the tool in an upside down position. Mild steel and most grades of stainless to 12 gauge at 90 per minute, with a cutting radius of 6. When the first edge gets dull, just turn it around and get double punch life. Description new and imporoved design over the hn, an3000 nibbler. The new style symmetrical-punch provides two cutting edges. R. Specifications cuts up to 10 gauge c. Mild steel cuts up to 12 gauge of most stainless steel 1/4 hp, 6 amp electric motor cutting speed 90 per minute cutting radius 6. For better tool handling, the front handle with a comfortable non-flip rubber grip has been added. These changes have resulted in smoother operation and better parts life. The old bulky cast plunger has been replaced by a lighter yoke.
Kett Tool Saw Blade: 1-1/2″ (157-22) 12 pack
- Stationary bottom blade. Cutting a wide range of pliable materials such as carpet, carpet underlayment, foam rubber, linoleum, vinyl, woven wood fabric, chip board. The cutting blades are the finest a-2 tool steel, and can easily be replaced.
Kett Tool Saw Blade: 2″ (157-53) 12 pack
- Number of teeth 30 tpi 0. 21 bore 7/16 maximum depth of cut 3/8 blade cuts the following materials soft aluminum copper and lead fiberglass plywood, hardboard, pressed board, etc.
Kett Tool Spindle Wrench: (149-6)
- Includes 60-22l left blade, 60-21 center blade, 60-22r right blade. Full set of 18 gauge replacement shear blades. Original kett replacement item, accept no substitutes.
Kett Tool Saw Blade: 1-1/2″ (157-23) 12 pack
- Number of teeth 30 tpi 0. 1 bore 1/4 maximum depth of cut 3/16 blade cuts the following materials hard aluminum brass fiberglass alliance wall, color wall, mirawal and similar single faced metal laminated panels plastics, plain as lucite, plexiglas and decorative laminates as consoweld, formica, micarta, texolite and panelyte.
Kett Tool KSV-32 Vacuum Saw Unit with 3 High Speed Steel Blades, 1 Carbide Abrasive Blade and Wrenches
- 2-1/2-inch carbide abrasive blade for fast cutting of drywall, fiberglass and plaster products with dust control. Includes 3 high speed steel blades. Cast aluminum saw head accepts the nose from your shop vacuum to collect debris as you cut.
Kett Tool Saw Blade: 2-1/2″ (157-68Z) 12 pack
- 08 bore 7/16 maximum depth of cut 5/8 blade cuts the following materials plastics, plain as lucite, plexiglas and decorative laminates as consoweld, formica, micarta, texolite and panelyte. Number of teeth 80 tpi 0.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
