17 Best and Coolest Lathes

 

Delta Industrial 46-460 12-12-Inch Variable-Speed Midi Lathe

Delta Industrial 46-460 12-1/2-Inch Variable-Speed Midi Lathe

Delta Industrial 46-460 12-1/2-Inch Variable-Speed Midi Lathe - Large 12-1/2-inch swing capacity provides the largest capacity in its class. Electronic variable speed with three-pulley speed ranges provide the required speeds needed to turn a project without changing belt position. Forward and reversing function allows the turner to achieve a superior finish sanding a turned piece with the grain causes the wood fibers to lay down and remain rough. Patented belt tensioning system for easy and quick speed changes and sets the belt at the correct tension every time for maximum power transfer and longer tool life. Powerful 1 hp max, 1,725 rpm motor.

 

PSI Woodworking LCENT4 4 Piece Wood Lathe Center Set for 2 MT

PSI Woodworking LCENT4 4 Piece Wood Lathe Center Set for #2 MT

PSI Woodworking LCENT4 4 Piece Wood Lathe Center Set for #2 MT - 1-inch diameter headstock spur center for standard spindles. 5/8-inch diameter headstock spur center for narrow spindles. Live ball bearing tailstock center with cup and point. Packaged in 2 wood boxes. Hollow center for drilling 5/16-inch (#2 mt) through holes (for lamps, etc).

 

NOVA 46301 Comet II Variable Speed Midi Lathe with Free G3 Chuck 12 x 165 NOVA Silver

NOVA 46301 Comet II Variable Speed Midi Lathe with Free G3 Chuck, 12″ x 16.5″, NOVA Silver

NOVA 46301 Comet II Variable Speed Midi Lathe with Free G3 Chuck, 12″ x 16.5″, NOVA Silver - 3″ faceplate, handwheel unit, 6″ tool rest, spur-drive center, live tailstock center, knockout bar, manual with parts breakdown and fasteners. Distance between centers 165″. Swing over bed 12″. 250-4000rpm, 1″x8tpi rh, 2mt hollow. 3″ faceplate, handwheel unit, 6″ toolrest, spur-drive center, live tailstock center, knockout bar, manual with parts breakdown and fasteners. 3/4hp 120v single phase, 60hz variable speed.

 

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System - Includes #2 round jaws, for dowels 7/8-to-1-1/2-inch holes 1-1/4-to-2-inch. Includes pin jaws which hold inside holes 1-to-2-1/4-inch, and a screw chuck. Includes #1 step jaws for dowels 3/32-to-1-3/8-inch, holes 11/16-to-2-3/8-inch. Includes four (4) self-centering jaw sets to hold round and square stock for turning, pre-threaded for 1x8tpi, and has an adapter for 3/4x16tpi spindles. Includes #3 round jaws, external grip 3-1/16-to-4-3/8-inch.

 

PSI Woodworking LCBEAD4 4 Piece HSS Bead Cutting Lathe Chisel Set

PSI Woodworking LCBEAD4 4 Piece HSS Bead Cutting Lathe Chisel Set

PSI Woodworking LCBEAD4 4 Piece HSS Bead Cutting Lathe Chisel Set - This set includes tools to create 3mm, 6mm, 8mm and 10mm beads. Produces excellent well formed beads you can be proud of. Turn beads like at expert take the mystery and skill out of cutting perfect beads to exact sizes with this 4 piece hss bead cutting chisel set. . The tools are about 14″ long with hss blades and hardwood handles. Packaged in an attractive wood carrying case.

 

2 Axis Digital Readout Dro for Milling Lathe Machine with Precision Linear Scale

2 Axis Digital Readout Dro for Milling Lathe Machine with Precision Linear Scale

2 Axis Digital Readout Dro for Milling Lathe Machine with Precision Linear Scale - Please leave a massage what travel length do you request and what machine do you install on. The linear scale must choose from 50-1000mm travel length, for over 1000mm ,it cost extra. It is compete dro kits with parts for mounting. This order includes 2 pieces 5 micron linear scale and 1 pieces 2 axis dro. Slim linear encoder in stock, please contact if you request.

 

Uxcell CNC Lathe HSS Square Cutting Tool Bits Bar 4 Piece 8mm x 8mm x 200mm

Uxcell CNC Lathe HSS Square Cutting Tool Bits Bar, 4 Piece, 8mm x 8mm x 200mm

Uxcell CNC Lathe HSS Square Cutting Tool Bits Bar, 4 Piece, 8mm x 8mm x 200mm - Parallelogram design. High speed steel tool bit for lathe. Used for fabrication of cutting tools for milling, turning, parting, engraving, drilling, punching, etc. Product name lathe hss tool bit material hss.

 

Triton Industrial Tools 5 Pc Premium HSS 60° Center Drill Combined Drill Countersink Lathe Tool Set

Triton Industrial Tools 5 Pc Premium HSS 60° Center Drill Combined Drill & Countersink Lathe Tool Set

Triton Industrial Tools 5 Pc Premium HSS 60° Center Drill Combined Drill & Countersink Lathe Tool Set - & countersink lathe tool set. Triton industrial tools 5 pc premium hss 60° center drill combined drill.

 

NEWLY DESIGNED LED Multipurpose Worklight Multifunctional Use on Sewing Machines Lathes Drill Presses Workbenches 30 Daylight LEDs Secure MAGNETIC MOUNT 12 Flexible Gooseneck Arm

NEWLY DESIGNED LED Multipurpose Worklight, Multifunctional, Use on Sewing Machines, Lathes, Drill Presses, Workbenches, 30 “Daylight” LED’s, Secure MAGNETIC MOUNT, 12″ Flexible Gooseneck Arm

NEWLY DESIGNED LED Multipurpose Worklight, Multifunctional, Use on Sewing Machines, Lathes, Drill Presses, Workbenches, 30 “Daylight” LED’s, Secure MAGNETIC MOUNT, 12″ Flexible Gooseneck Arm - Add light to your subject â–º the faj multipurpose led light brightens your work surface so you can perform all of your projects easily without straining your eyes with its clean, clear, crisp white light, the faj multipurpose led light will illuminate even the darkest of work areas while guaranteed not to flicker, pulsate, or dim with use. Magnetic mount and flexible neck â–º the faj multipurpose led light is the solution to all of your needs simply place the magnet on a metal surface and have the confidence that it will not slide nor move the 12″ flexible neck allows the light to be adjusted exactly to where you need it to be with no sagging or drooping simply set the light in its desired place and get to work. Cost efficient â–º the faj multipurpose led light is not only a multipurpose, functional light, it is a smart investment in savings led lights have shown to save upwards of 75% of traditional lighting costs in addition to the savings, the life expectancy of led lights can be upwards of 50x that of incandescent lights add light to your subject at the fraction of the cost. 100% lifetime money back guarantee â–º at faj, we stand behind our product and offer a 100%, lifetime money back guarantees for the lifetime of the product. Verstility in design â–º the faj multipurpose led light is easily attached and removed with its ultra-strong magnetic base whether being used on a sewing machine, drill press, lathe, or other metal surface, the light is sure to be secure in addition, rest assured that the magnet will leave no permanent marks to remove or difficult clamp to detach and best of all no batteries to deal with.

 

SHOP FOX W1752 Mini Wood Lathe

SHOP FOX W1752 Mini Wood Lathe

SHOP FOX W1752 Mini Wood Lathe - Includes live center, spur center, 3-inch face plate, and tool rest. This stable bench-top wood lathe has six speeds ranging from 480 to 4023 rpm, providing the flexibility for any turning project. All cast iron construction and a 1/2 hp motor provide plenty of power and stability to turn bowls up to 10-inch wide and spindles up to 15-1/2-inch long, or 38-inch long with the optional extended bed.

 

PSI Woodworking CUG3418CC Utility Grip 4 Jaw Lathe Chuck System

PSI Woodworking CUG3418CC Utility Grip 4 Jaw Lathe Chuck System

PSI Woodworking CUG3418CC Utility Grip 4 Jaw Lathe Chuck System - Includes screw chuck also includes an allen wrench and a set of tightening levers. Chuck is pre-threaded to 1″ x 8tpi includes 3/4″ x 16tpi adaptor. This c series chuck works with all “c” series jaws. Includes #1 step jaws 3/32″ to 1-7/8″ external & 11/32″ to 3-3/8″ internal includes #2 round jaws 1-1/2″ to 3-1/8″ external & 2″ to 3-7/8″ internal. Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathes.

 

PSI Woodworking LCTEN HSS Wood Lathe Tenon Tool

PSI Woodworking LCTEN HSS Wood Lathe Tenon Tool

PSI Woodworking LCTEN HSS Wood Lathe Tenon Tool - Only 1/16″ thick get a clean, sharp and accurate 90 degree inside angle corner for delicate turnings. . A must tool for any pen maker for cutting perfect tenons on pen center bands. The blade is 1-1/4″ wide and 5″ long with a 4″ wood handle. High speed tenon tool # lcten.

 

PSI Woodworking LCMINI2 Mini 5-Piece HSS Wood Lathe Chisel Turning Set

PSI Woodworking LCMINI2 Mini 5-Piece HSS Wood Lathe Chisel Turning Set

PSI Woodworking LCMINI2 Mini 5-Piece HSS Wood Lathe Chisel Turning Set - Fantastic buy for five essential chisels. Comes in an attractive wooden display box. Chisels are 10-inch in overall length, with 4-inch blades. Premium long lasting hss blades with beautifully turned and stained hardwood handles and brass ferrules. Includes-1/4-inch roughing gouge, 1/8-inch spindle gouge,-1/4-inch round nose scraper, 3/32-inch parting tool,-1/4-inch skew chisel.

 

Anytime Tools 5 Lathe Mill CENTER DRILL COUNTERSINK Bit Tooling SET

Anytime Tools 5 Lathe Mill CENTER DRILL COUNTERSINK Bit Tooling SET

Anytime Tools 5 Lathe Mill CENTER DRILL COUNTERSINK Bit Tooling SET - . Sizes 1, 2, 3, 4 and 5, 60° tip angles. Top quality m2 hss drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes in stock.

 

SHOP FOX W1704 13-Horsepower Benchtop Lathe

SHOP FOX W1704 1/3-Horsepower Benchtop Lathe

SHOP FOX W1704 1/3-Horsepower Benchtop Lathe - 12-inch distance between centers. Motor 1/3 hp, 2 amp, 110v, single-phase, 60 hz. Includes two tool rests. 8-inch swing over bed. Cast iron construction and infinitely variable speed control.

 

PSI Woodworking LCENTSS22 No 2 MT with  1-Inch Crown Super Wood Lathe Drive Center

PSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive Center

PSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive Center - Spring loaded point simplifies spindle centering and retracts to avoid spitting your work when tailstock pressure is applied. The psi super center crown compatible with headstocks with #2mt spindles. Get a better bite on your spindle with more teeth for a strong grip while still providing equal pressure and a positive drive. 45-by-15-by-15-inches with 1-inch crown. Ships in plastic production sleeves at 48-ounces.

 

Jet JWL-1015 Wood Working Lathe

Jet JWL-1015 Wood Working Lathe

Jet JWL-1015 Wood Working Lathe - Start here. This sturdy, smooth-running 15″ mini-lathe has the power, precision and versatility to turn out any number of projects. When you’re ready to make your ideas a reality. . The new jet 1015 is an ideal choice for the novice woodturner looking for an affordable, user-friendly first lathe, as well as the advanced enthusiast or professional who wants to add a full-featured mini-lathe to the shop.