Irwin Lock-n-Load Quick Change Extension Bit Holder 150mm 1/4in
- Irwin lock-n-load quick change extension bit holderspecifications insert bit standard 1/4 in. Draper, sealey, bahco, stanley and much more. Uk’s no 1 hand and power tool seller. Best brands at best prices.
Southwire Tools & Equipment FQCE36 Flexible Quick Change Drill Bit Extension
- Flexible quick connect extension. For use with up to 3/4″ short auger bit. Allows for extenstion of drill bits.
Insty-Bit Quick Change Extension 12”
- Chuck’s small 5/8″ diameter fits through slim holes for increased versatility. True one-handed operation, simply push the bit into the chuck. Will accept any 1/4″ (6 mm) hex shank accessory, with or without a power groove. Only chuck that holds all screwdriver bits 1″ and longer. Replaces all magnetic and non-magnetic bit holders. Just pop any of your existing 1/4″ hex-shank drill bits or driver bits into one of these extensions. Works in all corded and cordless drills. Ideal for use with high speed drill bits, spade bits, hole saws, screwdriver bits and all 1/4″ hex shank power tool accessories. Can’t quite fit your drill into that narrow space no need to get a whole new set of long bits. Black oxide finish with plated steel chuck give excellent corrosion resistance. Each extension includes a 1″ #1 plain hex phillips bit and a 2″ #2 power groove phillips bit. Positive action doesn’t let go until you want it to. The 12″ extension allows most people to reach an 8′ ceiling without a ladder, and you can even line them all up for 21″ of reach not for use with impact tools. Only chuck that accepts all standards, ansi, jis and din. Quick change hex-shank and hardened extensions optimize drill torque. Fits all keyed and keyless chucks. Patented all-hex design holds bits tight, even when removing bits from holes.
Generic YCUS150720-091 rew Tiper 1/4 Hex 1/4 Hex Shank 2″ 4″ 6″ 3pc Magnetic Bit Quick Change Extensions Holder Screw Tip 3pc Magneti
- Description 3pc magnetic bit extensions magnetized ends hold bits securely for hard to reach screws and nuts hex shank chucks firmly into drills useful in hand-held drivers accepts any 1/4″ hex bits includes (1) 2¡± extension (1) 4¡± extension (1) 6¡± extension.
Insty-Bit® Quick Change Extension 6″
- Only chuck that accepts all standards, ansi, jis and din. Quick change hex-shank and hardened extensions optimize drill torque. Just pop any of your existing 1/4″ hex-shank drill bits or driver bits into one of these extensions. Replaces all magnetic and non-magnetic bit holders. Each extension includes a 1″ #1 plain hex phillips bit and a 2″ #2 power groove phillips bit. Black oxide finish with plated steel chuck give excellent corrosion resistance. Ideal for use with high speed drill bits, spade bits, hole saws, screwdriver bits and all 1/4″ hex shank power tool accessories. Only chuck that holds all screwdriver bits 1″ and longer. Works in all corded and cordless drills. Will accept any 1/4″ (6 mm) hex shank accessory, with or without a power groove. Patented all-hex design holds bits tight, even when removing bits from holes. Positive action doesn’t let go until you want it to. True one-handed operation, simply push the bit into the chuck. Can’t quite fit your drill into that narrow space no need to get a whole new set of long bits. Chuck’s small 5/8″ diameter fits through slim holes for increased versatility. The 12″ extension allows most people to reach an 8′ ceiling without a ladder, and you can even line them all up for 21″ of reach not for use with impact tools. Fits all keyed and keyless chucks.
12inch Quick Change Extension
- Quick change extensions are available in 6inch and 12inch lengths. These hex shank drill extensions accept any standard quick change hex shank bit. Please choose size under product options above. Each extension features a recessed black sleeve to prevent accidental releases, and a slim tapered quick release chuck to help guide through holes as small as 11/16inch in diameter. They’re most commonly used with quick change spade bits to drill deep holes in woodand other materials.
Greenlee 921 Quick Change Extension Kit by Greenlee
- 4 piece kit with 2 extensions, auger bit and grip pullflexible shaft allows easy access to difficult and tight areasconvenient 1/4-inch quick connect receiver accepts most standard quick change accessoriesmultiple extensions can be easily joined to create the perfect length for any jobuse with any 1/4-inch quick change accessory 3/4-inch diameter and under.
Irwin Lock-n-Load Quick Change Extension Bit Holder 140mm 3/8in
- The irwin lock-n-load quick change extension bit holders have a lock-n-load and system for one-handed quick release. Length 140mm. Irwin industrial tools ltd. A carbon steel construction sleeve and body ensure durability and long life. Insert bit 3/8 inch. The jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits. , a newell rubbermaid company, produces high-quality hand tools and power tools accessories for metalworking and woodworking professionals.
Irwin Lock-n-Load Quick Change Extension Bit Holder 65mm 1/4in
- Irwin lock-n-load quick change extension bit holder specifications insert bit standard 1/4. Best brands at best prices. Draper, sealey, bahco, stanley and much more. Uk’s no 1 hand and power tool seller.
IRWIN Tools 1869518 Impact Performance Series Quick Change Bit Extension, 1/4-Inch Shank, 18-Inch Length
- Black oxide finish resists corrosion and increases life of extension. Built for maximum durability and long life with impact drivers. Patented jaw design is compatible with all 1/4″ hex shank accessories including insert bits. Large chuck withstands higher torque demands of impact drills.
Extension 5-1/2 Inch For 3/8 Inch Quick Change Bit-2pack
- Lock-n-load quick change extensions features carbon steel construction sleeve and body for durability and life lock-n-load system for one-handed quick release patented jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits 1/4 inch quick change range now holds insert bits magnetic for holding. .
Irwin Tools 4935651 Lock-n-Load Quick Change Extension, 3/8″, 2-3/4″
- Lock-n-load quick change extensions. 1/4″ quick change range now holds insert bits magnetic for holding. Carbon steel construction sleeve and body for durability and life. Patented jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits. Lock-n-load system for one-handed quick release.
Irwin Tools 4935653 Lock-n-Load Quick Change Extension, 12 by Irwin Tools
- Lock-n-load quick change extensionscarbon steel construction sleeve and body for durability and lifelock-n-load system for one-handed quick releasepatented jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits1/4 quick change range now holds insert bits magnetic for holding.
Kempston 88019 Quick Change Extension Sys Kit
- Use with any type of bit with a 1/4″ quick change hex such as spade bits or auger bits, drill bits. For use when drilling between studs and joists and pulling pull wire through them with the kit conveniently create the right length for the job 18 ” or 36 “sections for different size combinations. Kempston patent pending quick connect extension and installation kit can quickly and easily switch from drilling to pulling with the quick change pulling grip.
Extension 12 Inch For 3/8 Inch Quick Change Bit
- . Lock-n-load quick change extensions features carbon steel construction sleeve and body for durability and life lock-n-load system for one-handed quick release patented jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits 1/4 inch quick change range now holds insert bits magnetic for holding.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
