14 Coolest Stainless Screws

 

Headcote #7 x 1-5/8″ – #82 Mahogany – Stainless Steel Trim Head Deck Screws – 350 pc. Deck Pack for 100 Sq. Ft. of Decking – STX82T07162 - 350 piece deck pack for 100 square feet of decking. The new design of the headcote screws now features a star drive recess to minimize the stripping of the screw head. The durable color coating helps make the screws less visible. Type 305 stainless steel provides superior protection against corrosion and staining. #7 x 1-5/8″ trim head fasteners with a type 17 auger tip.

 

Stainless Steel Screw Kit: MP9 TKI3 - No more bent, rusted, or corroded screws. Stainless steel screw kits are an upgrade to the screws that come stock with your rcgreat quality stainless steel material. Your new kit will include everything needed to do a full conversion and more. Stainless screw kits are 100% complete. All socket screws + extrasbutton screws + extrasflat head screws + extrasset screws + extrasnuts + extraswashers + extrasbondhus short arm hex wrenches, all needed sizesquality reusable plastic pit case. General screw installation & notes use either a wax or grease on the threads to help prevent stripping while going into new or hard material. Some screws that are included in rcscrewz’s kits remain phillips heads but are still stainless steel. This may include some chassis screws and differential screws. Please refer to your assembly manual for screw locations. Rcscrewz has done this for strength, as a result of rcscrewz’s field testing, on small diameter screws (2mm and 2-56″ dia). All other remain socket head.

 

Stainless #8 x 1/2″ Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point,(1/2″ To 1-1/2″ Length in Listing) 100 pieces (#8 x 1/2) - When selecting a self-drilling screw design, it is important to consider the material thickness and type of materials to be joined. The length of the drill point determines the material thickness which the screw can reliably penetrate. These work great on gutters. These #8 x 1/2 stainless teks are great to use in environments that are damp. Self-drilling screws, also known as tek screws, eliminate the need for a pre-drilled hole.

 

#10 x 3/4″ Stainless Phillips Pan Head Sheetmetal Screw (1/2″ to 2″ lengths in Listing) 100 Sheet Metal Screws (#10 x 3/4 inch) - Pan heads are slightly rounded with short vertical sides. . Phillips drives are x shaped for a phillips screw driver. Sheet metal screws have large threads for use in sheet metal sometimes also used in plastic, fiberglass, or wood.

 

6-32 x 3/8 Tamper Resistant Torx Button Head Socket Machine Screw 18-8 Stainless Steel (T-10) (20) - 3. These machine screws conform to ansi/asme b18. Tamper resistant machine screws provide an additional layer of security by their drive design, which prevents their removal with ordinary screw drivers or insert bits. 6.

 

Marafast AA188SSS92311A102P #4-40 x 3/32″ Socket Set Screw, 18-8 Stainless Screw, Plain (Pack of 100) - 15 years experience in the production of stainless steel fasteners. Package include100 pcs 10#-16 screws1 pcs magnetic hook(holds up to 12 pounds). Good corrosion resistance.

 

Stainless Steel Sheet Metal Screw, Plain Finish, Flat Head, Phillips Drive, Self-Drilling Point, 3/4″ Length, #6-20 Threads (Pack of 100) - Austenitic stainless steels are alloys of iron and carbon that contain between 16% and 30% chromium, a maximum of 0. G. Length is measured from the top of the head. They’re self-starting in thin sheet metal, but in thicker materials a drilled hole is recommended. Self-drilling points are excellent for use with sheet metal.   The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. 15% carbon, along with nickel (or manganese), and other alloying elements. 304, 316). Where the 18 refers to the % of chromium and 8 to the % of nickel contained in the material.    Austenitic stainless steels are designated by a 3 digit sae stainless steel grade beginning with the number 3 (e.   Another common naming convention for austenitic stainless steels are 18/8, 18/10, 18/0, etc. Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. The phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.     Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Sheet metal screws have a pointed end and widely spaced threads.   These properties account for their extremely wide use in practically every industry.

 

Hindley 44358 5/16″ X 6″ Stainless Steel Lag Eye Bolt Screw Thread (Pack of 10) - 31″ thread length / 0. 31″ wire diameter). 6″ h x 6. 63″ inside eye diameter / 0. -Rustproof. 5-in. 24″ wire diameter). 75″ d (4. 5-in. 5″ inside eye diameter / 0. 63″ inside eye diameter / 0. 75″ thread length / 0. 75″ shank length / 1. 75″ d (0. 75″ h x 4. X 4. 3. 5″ w x 1. 75″ thread length / 0. Generic dimensions -3. 31″ wire diameter). 33″ wire diameter). 5″ w x 2″ d (2. 75-in. 25″ w x 1. 75″ shank length / 1. 75″ thread length / 0. 25″ thread diameter / 2. 75″ inside eye diameter / 0. 5-in. 5″ h x 6. -Material stainless steel. 75″ shank length / 1. X 6. 44358 size 5/16″ x 6″ features -screw thread. 4. 25-in. X 6. 5-in. -4. 5″ w x 1. 38″ thread diameter / 2. -4-in. X 4. 25″ d (0. 75″ shank length / 1. -6-in. 4″ h x 4.

 

Senco Duraspin Exterior Trim Head Stainless Steel Screws – 08R250S – 2-1/2″ x #8 - Has a coarse 2/3 with wax lube thread and a type 17 (cut) point. There are 800 screws per tub. The finish is stainless steel with a #2 square trim head. The senco duraspin exterior trim head stainless steel screws, 2-1/2″ x #8 is designed for exterior, wood or composite application.

 

#6 X 1/2″ Stainless Philips Pan Head Sheetmetal Screw (1/2″ to 2″ lengths in Listing) 100 Sheet Metal Screws (#6 x 1/2 inch) - Phillips drives are x shaped for a phillips screw driver. Sheet metal screws have large threads for use in sheet metal sometimes also used in plastic, fiberglass, or wood. . Pan heads are slightly rounded with short vertical sides.

 

410 Stainless Steel Thread Cutting Screw, Plain Finish, Pan Head, Phillips Drive, Type F, #2-56 Thread Size, 1/4″ Length (Pack of 100) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Pan head has a flat top and short vertical sides with a rounded top edge. 410 stainless steel has high strength and hardness, and resists corrosion in mild environments. Plain surface has no finish or coating.

 

Integral Hinge Set Nylon W/Stainless Screws - 15 years experience in the production of stainless steel fasteners. Strong carry-corrosion, high temperature performance, strong anti-rust. Package include 50 pcs m4x16 screws 1 pcs magnetic hook(holds up to 12 pounds).

 

10 x 3″ Deck Screws – 1,500 Pieces – Bugle Head, Star Drive, 316 Stainless Steel (Marine Grade) , Type 17 Auger Point -BUlk Box - 1,500 piece bulk box. Type 17 point for easy entry. Coarse thread, star drive. Type 316 stainless steel for marine use. #10 x3″ stainless steel bugle head fasteners.

 

10l0l 18-8 Stainless Steel UNC Countersunk flat Head Pillips Drive Machine Screw kit, 6#-323/8 Kit(200) - Package include200 pcs 6#-32 machine screws,1 pcs hook magnet (can hold up to 12 pounds). 15 years experience in the production of stainless steel fasteners. Head hickness outer diameter0060255(inch）. Anti, corrosion, anti, rust, high temperature resistance and environmental protection.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.