Drill America DWT Series Qualtech Carbon Steel Hex Threading Die, M14 x 1.5 Size (Pack of 1)
- Made of carbon steel. No special holder is required for this type of die, any wrench large enough will suffice. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Hex die is for dressing over bruised or rusty threads. Ideal for maintenance in the shop or field.
Drill America DMS Series Bi-Metal Hole Saw, 5-1/2″ Size
- It needs just one pass to cut through studs. Can be used in a wide variety of applications. It cuts faster, smoother without as much vibration as the others due to its variable pitch teeth. Variable pitch teeth allow for cutting thru any wood, metal or plastic. Supports heavy duty cutting with its rugged constitution, which is constructed on tough metal.
Drill America MMO1/32-4FSE Solid Carbide End Mill, Polished Finish, 4 Flute, Square End, 1/8″ Cutting Length, 1/32″ Cutting Diameter, 1-1/2″ Length, 1/8″ Shank (Pack of 1)
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 4 flute single end. Round shanks allow use with a wide variety of toolholding systems. Available in polished finish. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
Drill America DWT Series Qualtech High-Speed Steel Hand Threading Tap, Uncoated (Bright) Finish, Round with Square End Shank, Bottoming Chamfer, M16 x 1.5 Size (Pack of 1)
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Round shank with square end.
Drill America KFDRSD Series Killer Force High-Speed Steel Reduced-Shank Drill Bit, Black/Gold Oxide Finish, Round with 3-Flats Shank, Spiral Flute, 135 Degrees Split Point, 1″ Size (Pack of 1)
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Ideal for drilling in low and medium tensile strength materials. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems.
Drill America DWDMM Series Qualtech High-Speed Steel Jobber Length Drill Bit, Black Oxide Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 13mm Size (Pack of 1)
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Ideal for production, maintenance or portable drilling jobs. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Round shanks allow use with a wide variety of toolholding systems.
Drill America DWDTS Series High-Speed Steel Taper Shank Drill Bit, Black Oxide Finish, 3 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 1-1/16″ Size (Pack of 1)
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Designed to perform in a broad range of materials in the iron and steel families. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
Drill America DWT Series Qualtech Carbon Steel Hex Pipe Threading Die, 1/8″-27 NPT (Pack of 1)
- Hex die is for dressing over bruised or rusty threads. Ideal for maintenance in the shop or field. No special holder is required for this type of die, any wrench large enough will suffice. Made of carbon steel. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Drill America DWD29J-BG-PC Qualtech Economy 29 Piece High-Speed Steel Jobber Length Drill Bit Set in Plastic Case, Black/Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point (Pack of 1)
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 29 piece drill bit set comes in a plastic case. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems.
Drill America DMS Series Bi-Metal Hole Saw, 5-3/4″ Size
- It cuts faster, smoother without as much vibration as the others due to its variable pitch teeth. It needs just one pass to cut through studs. Can be used in a wide variety of applications. Variable pitch teeth allow for cutting thru any wood, metal or plastic. Supports heavy duty cutting with its rugged constitution, which is constructed on tough metal.
Drill America DEWCCD Series High-Speed Steel Combined Drill Bit and Countersink, Black Oxide Finish, Round Shank, Spiral Flute, #4 Size, 2.125″ Length (Pack of 1)
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Used for producing center holes in work pieces which require machining between centers. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
Drill America DMS Series Bi-Metal Hole Saw, 5-1/4″ Size
- It cuts faster, smoother without as much vibration as the others due to its variable pitch teeth. Can be used in a wide variety of applications. It needs just one pass to cut through studs. Supports heavy duty cutting with its rugged constitution, which is constructed on tough metal. Variable pitch teeth allow for cutting thru any wood, metal or plastic.
Drill America MMO3/16-2FSE-BN Solid Carbide End Mill, Polished Finish, 2 Flute, Ball End, 5/8″ Cutting Length, 3/16″ Cutting Diameter, 2″ Length, 3/16″ Shank (Pack of 1)
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Available in polished finish. Round shanks allow use with a wide variety of toolholding systems. 2 flute single end ball. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Drill America KFD29J-PC KFD 29-Piece High-Speed Steel Jobber Length Drill Bit Set in Plastic Case, Black/Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ to 1/2″ Size
- High-speed steel (hss) provides hardness for wear resistance. Comes in a plastic storage case. Assortment of 29 jobber length drill bits includes inch sizes 1/16″ to 1/2″ in 1/64″ increments. Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging. Black and gold oxide finish resists corrosion and increases the hardness of the drill bit.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
