Top 25 Chuck Jaws

 

NOVA 6026 Mini Spigot Chuck Accessory Jaw Set

NOVA 6026 Mini Spigot Chuck Accessory Jaw Set

NOVA 6026 Mini Spigot Chuck Accessory Jaw Set - Long nose jaws allow for a very powerful spigot grip for smaller work. 2-year warranty. Same jaw fixing system across all nova chuck models, total system interchangeability. Special nova dovetail profile, designed to maximum strength and holding in wood turning, without crushing wood fibers. All nova chuck accessory jaws are designed to hold in the expansion and contraction modes.

 

Sorby Rsj1 Patriot Chuck Jaws - 1

Sorby #Rsj1 Patriot Chuck Jaws – 1″

Sorby #Rsj1 Patriot Chuck Jaws – 1″ - Designed to work with the robert sorby patriot chuck, these 1″ jaws have fine internal and external dovetails and gripper teeth, and they are perfect for gripping miniature projects. England specifications for 1″ pin jaws, minimum external 1″ (25mm), maximum external 2″ (50mm), minimum internal 17/32″ (14mm), maximum internal 1-17/32″ (39mm).

 

Steel Dragon Tools 26242 Chuck Jaw Insert Set w Springs fits RIDGID 1224 Pipe Threading Machine

Steel Dragon Tools 26242 Chuck Jaw Insert Set w/ Springs fits RIDGID 1224 Pipe Threading Machine

Steel Dragon Tools 26242 Chuck Jaw Insert Set w/ Springs fits RIDGID 1224 Pipe Threading Machine - Steel dragon tools® 26242 chuck jaw insert set w/ springs fits ridgid® 1224 pipe threading machine(3) chuck jaws (3) springsfor use with model sdt-1224 treading machine.

 

USST KT-8300AP Alum T6061 Pointed Soft Chuck Jaws for 8 CNC Lathe Chucks 3 Tall Set of 3 Pieces

USST KT-8300AP Alum T6061 Pointed Soft Chuck Jaws for 8″ CNC Lathe Chucks, 3″ Tall (Set of 3 Pieces)

USST KT-8300AP Alum T6061 Pointed Soft Chuck Jaws for 8″ CNC Lathe Chucks, 3″ Tall (Set of 3 Pieces) - Aluminum 6061 t6. 15mm x 60 degree serrations. 2 holes. Supplies maximum concentricity on finish turning operations. If jaws are taller than standard height for your chuck, there is a loss of grip force, reduce rpm during all operations check your chuck manual to figure standards for your chuck and grip force diagrams.

 

Steelex M1058 3 Jaw Chuck 5-Inch

Steelex M1058 3 Jaw Chuck, 5-Inch

Steelex M1058 3 Jaw Chuck, 5-Inch - 5-inch 3-jaw scroll. Plain back. 2 sets of jaws. Wrench and mounting screws included. 118-inch bore.

 

123599 HUCK UNITIZED CHUCK JAW  PACK OF 1

123599, HUCK, UNITIZED CHUCK JAW, , PACK OF 1

123599, HUCK, UNITIZED CHUCK JAW, , PACK OF 1 - Product> huck tool parts. Huck tool parts & accessories. Tool parts & accessories.

 

6 6 inch 4 Jaw Independent Lathe Chuck

6″ (6 inch) 4 Jaw Independent Lathe Chuck

6″ (6 inch) 4 Jaw Independent Lathe Chuck - Flimsy parts are specifically engineered by quenching process to enhance durability. 2992″ (160mm). 1496″ (80mm). External jaw clamping range 1. 002″. Body is made of high quality nodular cast iron suitable for high rotation speed. Adjusted independently to center with superior gripping force suitable for all kinds of special shaped work pieces. Internal jaw clamping range 0. 3150″ (8mm), 3. Three mounting screws and one chuck key are included in the package. Accuracy 0. 9685″ (50mm), 6. High precision short cylindrical center mounting. Superior gripping force to meet precision machining demands.

 

HHIP 3900-4702 5C Mount 4 3-Jaw Lathe Chuck

HHIP 3900-4702 5C Mount 4″ 3-Jaw Lathe Chuck

HHIP 3900-4702 5C Mount 4″ 3-Jaw Lathe Chuck - 5c adapter with standard internal and external threads. Hole through 5c adapter is 075″ hole through chuck is 0866″. Quick set up in fixtures and 5c spindles chuck jaws are self centering, scroll type. Outside diameter clamp range is 0079-3150″ inside diameter jam range is 1181-3543″. 2 sets of solid steel jaws, both internal and external tir is 0001″.

 

USST KT-6250P Steel Soft Chuck Jaws for 6 CNC Lathe Chucks  25 Tall Set of 3 Pieces

USST KT-6250P Steel Soft Chuck Jaws for 6″ CNC Lathe Chucks , 2.5″ Tall (Set of 3 Pieces)

USST KT-6250P Steel Soft Chuck Jaws for 6″ CNC Lathe Chucks , 2.5″ Tall (Set of 3 Pieces) - Supplies maximum concentricity on finish turning operations. 15mm x 60 degree serrations. Steel (1050), can be hardened. 2 holes. If jaws are taller than standard height for your chuck, there is a loss of grip force, reduce rpm during all operations check your chuck manual to figure standards for your chuck and grip force diagrams.

 

USST RKT-8200A Aluminum 6061 T6 Round Chuck Jaws for 8 CNC Lathe Chucks 2 Tall Set of 3 Pieces

USST RKT-8200A Aluminum 6061 T6, Round Chuck Jaws for 8″ CNC Lathe Chucks, 2″ Tall (Set of 3 Pieces)

USST RKT-8200A Aluminum 6061 T6, Round Chuck Jaws for 8″ CNC Lathe Chucks, 2″ Tall (Set of 3 Pieces) - If jaws are taller than standard height and/or oversized dia- there is a loss of grip force, reduce rpm during all operations check your chuck manual to figure standards for your chuck and grip force diagrams. 2 holes. Aluminum 6061 t6. Use for holding thin walled parts to prevent shape distortion, supplies maximum concentricity on finish turning operations. 15mm x 60 degree serrations.

 

USST KT-8200F Steel Flat Soft Chuck Jaws for 8 CNC Lathe Chucks 2 Tall Set of 3 Pieces

USST KT-8200F Steel Flat Soft Chuck Jaws for 8″ CNC Lathe Chucks, 2″ Tall (Set of 3 Pieces)

USST KT-8200F Steel Flat Soft Chuck Jaws for 8″ CNC Lathe Chucks, 2″ Tall (Set of 3 Pieces) - 15mm x 60 degree serrations. Supplies maximum concentricity on finish turning operations. If jaws are taller than standard height for your chuck, there is a loss of grip force, reduce rpm during all operations check your chuck manual to figure standards for your chuck and grip force diagrams. 2 holes. Steel (1050), can be hardened.

 

Steelex M1060 3 Jaw Chuck 8-Inch

Steelex M1060 3 Jaw Chuck, 8-Inch

Steelex M1060 3 Jaw Chuck, 8-Inch - 2 sets of jaws. 255-inch bore. Wrench and mounting screws included. 8-inch 3-jaw scroll. Plain back.

 

Grizzly H8031 2-Inch 3-Jaw Micro Chuck 34-Inch by 16 TPI

Grizzly H8031 2-Inch 3-Jaw Micro Chuck, 3/4-Inch by 16 TPI

Grizzly H8031 2-Inch 3-Jaw Micro Chuck, 3/4-Inch by 16 TPI - This 3-jaw micro chuck is only 2″ in diameter and it’s reversible too get all the benefits of a large lathe chuck in a size that fits smaller lathes. Self-centering. .

 

USST KT-6200P Steel Soft Chuck Jaws for 6 CNC Lathe Chucks  2 Tall Set of 3 Pieces

USST KT-6200P Steel Soft Chuck Jaws for 6″ CNC Lathe Chucks , 2″ Tall (Set of 3 Pieces)

USST KT-6200P Steel Soft Chuck Jaws for 6″ CNC Lathe Chucks , 2″ Tall (Set of 3 Pieces) - 2 holes. If jaws are taller than standard height for your chuck, there is a loss of grip force, reduce rpm during all operations check your chuck manual to figure standards for your chuck and grip force diagrams. Supplies maximum concentricity on finish turning operations. Steel (1050), can be hardened. 15mm x 60 degree serrations.

 

NOVA 6006 Mini Cole Chuck Accessory Jaw Set

NOVA 6006 Mini Cole Chuck Accessory Jaw Set

NOVA 6006 Mini Cole Chuck Accessory Jaw Set - Suitable for lathes with minimum 8-inch diameter swing. Designed for re-chucking of bowls to remove chuck marks, add decoration or to re-shape the bottoms of bowls that have already been turned. 2-year warranty. Additional accessory rubber bumpers are available. Other nova jaw sets can be fitted to the cole jaws making a combination jaw facility.

 

Ridgid 44090 D838X Set of Chuck Jaws

Ridgid 44090 D838X Set of Chuck Jaws

Ridgid 44090 D838X Set of Chuck Jaws - Used with ridgid model 300 and 535. This product manufacture by united states. Ridgid covers its products with a lifetime warranty against defects in material or workmanship. This product is used for tools-replacement-parts. Made of alloy steel. Unmatched durability and reliability. This item is 44090 set of chuck jaws. 1/8″, 2″ capacity.

 

USST KT-8200P Steel Soft Chuck Jaws for 8 CNC Lathe Chucks 2 Tall Set of 3 Pieces

USST KT-8200P Steel Soft Chuck Jaws for 8″ CNC Lathe Chucks, 2″ Tall (Set of 3 Pieces)

USST KT-8200P Steel Soft Chuck Jaws for 8″ CNC Lathe Chucks, 2″ Tall (Set of 3 Pieces) - Supplies maximum concentricity on finish turning operations. Steel (1050), can be hardened. 15mm x 60 degree serrations. 2 holes. If jaws are taller than standard height for your chuck, there is a loss of grip force, reduce rpm during all operations check your chuck manual to figure standards for your chuck and grip force diagrams.

 

NOVA JS100N 100mm Chuck Accessory Jaw Set

NOVA JS100N 100mm Chuck Accessory Jaw Set

NOVA JS100N 100mm Chuck Accessory Jaw Set - 2-year warranty. Same jaw fixing system across all nova chuck models, total system interchangeability. Designed for expanded dovetail, reverse dovetail for gripping footed bowls. All nova chuck accessory jaws are designed to hold in the expansion and contraction modes. One of the most popular accessories for mounting 12-14-inch bowls.

 

PSI Woodworking CUG3418CC Utility Grip 4 Jaw Lathe Chuck System

PSI Woodworking CUG3418CC Utility Grip 4 Jaw Lathe Chuck System

PSI Woodworking CUG3418CC Utility Grip 4 Jaw Lathe Chuck System - Chuck is pre-threaded to 1″ x 8tpi includes 3/4″ x 16tpi adaptor. Includes screw chuck also includes an allen wrench and a set of tightening levers. This c series chuck works with all “c” series jaws. Includes #1 step jaws 3/32″ to 1-7/8″ external & 11/32″ to 3-3/8″ internal includes #2 round jaws 1-1/2″ to 3-1/8″ external & 2″ to 3-7/8″ internal. Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathes.

 

Grizzly H8045 3-Jaw Wood Chuck 6-Inch

Grizzly H8045 3-Jaw Wood Chuck, 6-Inch

Grizzly H8045 3-Jaw Wood Chuck, 6-Inch - Jaws are self-centering and synchronized. Includes tightening wrenches. Hold round stock securely with this 3-jaw chuck jaws are self-centering and synchronized includes tightening wrenches.

 

ABBOTT 15mm x 60176 Serrated Chuck Jaws - Style P - Model  KTT8S CHUCK SIZE 8 Hole Spacing 984 Height  2 Length  4 Width  15

ABBOTT 1.5mm x 60176; Serrated Chuck Jaws – Style P – Model : KTT8S CHUCK SIZE: 8″ Hole Spacing: .984″ Height : 2″ Length : 4″ Width : 1.5″

ABBOTT 1.5mm x 60176; Serrated Chuck Jaws – Style P – Model : KTT8S CHUCK SIZE: 8″ Hole Spacing: .984″ Height : 2″ Length : 4″ Width : 1.5″ - Made in usa. Jaws have 15mm pitch x 60° serrations. Jaws are made from 1018 mild steel.

 

Sherline 1140 - 3-Jaw Chuck Pin Jaws

Sherline 1140 – 3-Jaw Chuck “Pin Jaws”

Sherline 1140 – 3-Jaw Chuck “Pin Jaws” - Diagram 1you may purchase these jaws to fit an existing sherline 3-jaw chuck, or you can order a new chuck with the jaws installed. The t. One of these areas is laser engraving. These pins can be changed to give you a longer gripping area (see diagram 1). 006 or less (see diagram2). Each pin jaw set includes (3) hardened jaws (p/n 11414p), and (3) sets of each of the following lengths of 1/8″ hardened steel dowel pins 3/4″ (p/n 11526), 1″ (p/n 11524), & 1-1/4″ (p/n 11416). This allows for a larger clamping diameter range. Of these pins is. These jaws can be reversed so the pin can be on the inside (standard relationship) or the outside. That can be held is. These jaws are not designed for machining parts or other uses that require more than finger tight closing pressure to hold the part in the chuck. With the jaws mounted in their standard relationship (with the pins towards the center of the chuck), the smallest o. D. We designed our pin jaws specifically for laser engraving rings and other similar parts. R. D. The smallest i. That can be held is. Each year our machines and accessories are being purchased for use in fields and areas other than their intended use. 226″. 476″. Diagram 2 . I.

 

Large Flat Jaws Chuck

Large Flat Jaws Chuck

Large Flat Jaws Chuck - Large flat jaws for the woodriver turning chuck make it easy to finish the bottom of plates and bowls. . Grips outer edge of stock from 1-7/8″ to 8″ in diameter.

 

Grizzly H8044 6-Inch 3-Jaw Wood Chuck 34-Inch by 16 TPI

Grizzly H8044 6-Inch 3-Jaw Wood Chuck, 3/4-Inch by 16 TPI

Grizzly H8044 6-Inch 3-Jaw Wood Chuck, 3/4-Inch by 16 TPI - Includes tightening wrenches. Jaws are self-centering and synchronized and they can be reversed. Hold round stock securely with this 3-jaw chuck. Specifications size 3/4″ tpi 16. .

 

PSI Woodworking LCM18X 3 Jaw Micro Wood Lathe Chuck

PSI Woodworking LCM18X 3 Jaw Micro Wood Lathe Chuck

PSI Woodworking LCM18X 3 Jaw Micro Wood Lathe Chuck - Uses small levers to open and tighten the three jaws. . This self centering, 3 jaw micro chuck is ideal for holding small projects from the inside or outside. 2 pounds. Holds a workpiece from 3/4″ to 2-1/2″ inside diameter, and a workpiece from zero to 1-1/4″ outside diameter. The smaller diameter offers a safety feature keeping your knuckles away from the jaws when working close to the chuck. Pre cut with a 1″ x 8 tpi standard thread mount, and includes an adapter for 3/4″ x 16 tpi spindles. Weighs only 1. The provided step jaws reverse for extra versatility when securing the work piece from the outside, or inside.