Top 25 Best Carbide Blades in 2019

 

Fein 63502128020 Thick Carbide Blade 3 pack - Also used for plunge cutting into drywall and cutting porous concrete blocks. Recessed for flush cutting such as along a shower floor. Perfect for your home renovation. Removes grout without damaging surrounding tiles. For removal of thick grout joints such as in foyers.

 

ROLAND CUTTER BLADES CEMENTED CARBIDE BLADE FOR VINYL FILM 5 PCS IN ONE BOX - -The primary rationale for blades of different angles is cutting depth. A lower angle (45 degree) is great for thin materials, while a steeper angle (60 degrees) has a more vertical cutting orientation that penetrates deeper -an increased amount of blade dragging through the material when cutting fine detail can cause, what they call, vinyl ears (parts lifted up). With minimal blade in the material, a 60 degree blade tends to cause fewer, if any, vinyl ears. Type machines. This blade is suitable for cutting standard vinyl, and comes in packages of 5 blades. Less of the blade’s cutting area is used, and blade life is wasted. Made of cemented carbide work in roland cutters and etc. So use a 45 degree blade always, unless a 60 degree blade is needed for thick or more custom types of cutting, if 45 degrees blades are not available -the gcc red cap blade features a standard 45-degree angle. The more horizontal cutting orientation of the 45 degree blade accurately distributes the cutting task over a larger blade area, and thus last longer (and is cheaper). -Using a 60 degree blade on everyday cutting is a waste of a blade, technically speaking.

 

6-Pack Roland Canon Refine Type Replacement Carbide Blade Set 45 degree - 45 degree angle for most standard cutting of sign vinyl. For roland, bridge, refine, us cutter, pcut type machines. Last 3 times as long. 45 degree cemented carbide blades pack of 6. Made of carbide vs metal.

 

Tungsten Carbide Blade Replacements - 2 replacement blades. Carbide blades last 5 times longer than steel blades. Lifetime warranty.

 

Bosch OSC114C-2 1-1/4-Inch Multi-Tool Carbide Tooth Plunge Cut Blade, 2-Pack - Carbide tip blade can cut both metal and wood. Bosch 12-pin oscillating interface system (ois). Tip is welded to a high-carbon steel body. Cuts hard screws, bolts, nails and other metals. Anti-vibration slots and thicker interface bracket reduces vibration.

 

Vermont American 27255 9-Inch 40T Smooth Cut Carbide Circular Saw Blade - Dyanite carbide lasts 6x longer than standard carbide. Has a total of 40 teeth. These blades have dyanite carbide teeth for superior strength and wear. King carbide blades provide the best in precision, durability and performance for the discriminating woodworker, cabinet shop or industrial application. Heavy bodies and fully hardened plates with extra-large, re-sharpenable teeth make these blades fit for professional use and won’t distort under heavy use, so they run truer and make more accurate cuts. King carbide blades provide the best in precision, durability and performance. Heavy bodies, fully hardened plates and extra-large and re-sharpenable teeth. Dyanite carbide lasts 6-times longer than standard carbide. These blades have dyanite carbide teeth made with our patented process, giving you the best carbide on the market for superior strength, wear, edge retention and impact resistance.

 

Ryobi HPL51K Planer (2 Pack) Replacement 3-1/4″ Carbide Blade # 690861001-2pk - Includes (2), 3-1/4″ carbide blade # 690861001 genuine oem replacement part new, oem bulk packed please refer to list below for compatibility ryobi hpl51k corded hand.

 

Freud DS0606CW Diablo 6-Inch 6-TPI Carbide-Tipped Reciprocating Saw Blade - Freud’s tico hi-density carbide teeth deliver 10 times the cutting life of standard reciprocating blades. Blade features oversized demolition blade body that has increased height for straighter cuts with less vibration. All this adds up to more cuts for your buck. Perma-shield non-stick coating for less heat, gumming and corrosion.

 

Bosch PA1202 Pair of Woodrazor Tungsten Carbide Planer Blades - Woodrazor tungsten carbide planer blades. Fits bosch planers 1594, 3296, 3296k, 3365, 53514, 53518. Fits also black&decker 7696, dewalt dw6677, dw678, dw680, freud fe82, hitachi p20da, makita n1900b, metabo 0882, porter cable 9125/125, skil 1555/hd1555.

 

Skil 75518 5-1/2-in 18-Tooth Carbide Blade for HD5510 - – 5-1/2″, 18t, 1/2″ arbor, sharp cutting edges for fast smooth cuts, clear anti-stick coating to resist heat friction and binding, tungsten carbide lasts up to 60x longer than steel blades.

 

Red Devil 3012 2-Inch Carbide Blade - Lasts up to 10 times longer. Twice as strong as conventional blades. Resists corrosion. Scrapes any tough surface without gouging.

 

Fein 63502118070 Medium Thickness Carbide Blade 10 pack - Removes grout without damaging surrounding tiles. Perfect for your home renovation. Segmented and recessed for corners and flush cutting applications. Also used for plunge cutting into drywall and cutting porous concrete blocks. For removal of standard size grout joints.

 

Bosch OSC138RF 1-1/4-Inch Carbide Grit Plunge Blade - High-quality carbide grit and diamond-grit blades deliver great performance. Segment blades and a triangle rasp ensure bosch grinding products can perform any application with precision in tight spaces. Applications for this bosch range from grout removal between closely set tiles to cutting abrasive materials.

 

Hole Pro BT-002: Tungsten Carbide Blade Set – for X-Models ONLY NOT FOR T-200 Model - Blades have a tungsten carbide tip for longer life. Used with the x-148, x-230, x-230+, x-305, x-425, adjustable hole cutters. Do not fit the hole pro model t-200. Cuts sheetrock, mdf, plaster, plywood, fiberglass, hardi fiber-cement board, & similar materials.

 

DeWalt Carbide Edge Utility Blades 50/Pk - A complete start-up kit offering the breadth of accessories helpful for wide assortment of tasks. Features for sawing, cutting, scraping, shaping, polishing and removing grout. Quick blade release mechanism. Fits with mastercraft / bosch / milwaukee / skil / ridgid / fein / black & decker / rockwell / dewalt / einhell / porter cable / worx / craftsman multi tool.

 

Stanley 15-410 Rod Saw – Carbide Grit Blade, Hacksaw Blade - Stanley, black & decker. Makes thin straight cuts in ceramic, hardened steel, cast iron and masonry. Limited lifetime warranty. Tungsten carbide particles enable blade to cut on both forward and reverse strokes. Fits standard hacksaw frame.

 

Quad Trimmer With Tungsten Carbide Blades - Trim pneumatic quad pro trimmer with carbide blades features in one pass it trims both sides of the both sides of edgebanding with a comfotable and ergonomic design the quad trimmer trims in all directions for a super smooth finish super smooth action new carbide blades last 5x longer than steel blades replaceable blades comfortable, ergonomic design. Trim pneumatic quad pro trimmer with carbide bladesthe pneumatic quad trimmer makes trimming edgebanding quick and easyfastcap qpro. Fastcap qpro.

 

Imperial Blades-IBOA620-1 Made in the U.S.A. ONE FIT Triangular RASP Carbide Blade Fits: Fein, Bosch, Rockwell, DeWalt, Milwaukee, Makita & More 1-Pk - Features our one fit system allowing our blades to fit 98% of multi-tools/oscillating tools on the market. Universal fit triangular rasp carbide blade 1-pk. A. Use this triangular carbide blade for grinding or rasping. S. This aggressive material remover can work over large areas. Imperial blades-iboa620-1-made in the u. Cut wood, hardened adhesives, thin set and masonry.

 

Dremel MM485B Universal Carbide Flush Cut Blade, 3-Pack - Now users can cut hardwoods, nails, screws, stainless steel bolts, galvanized pipe, plaster & lathe, cement board, fiber board, sheet metal, slate, ceramic tile and more. Universal quick-fit system allows this blade to fit nearly every oscillating tool on the market. Its wide 1-1/4-inch blade speeds through long cuts and can make plunge cuts up to 1-11/16-inches deep. . The dremel mm485 carbide flush cutting blade is the first oscillating cutting blade with high-performance carbide teeth.

 

Milwaukee 48-00-1430 9-Inch Tungsten Carbide Sawzall Blades, 3-Pack - Measures 9 inches in length. The product is manufactured in united kingdom. The product is durable. 5-year limited manufacturer’s warranty. Designed to cut through hardwood flooring, cast iron, stainless steel, fiberglass materials, ceramic tile, stone, plaster, and more. 1/2-inch universal tang fits all sawzalls. The product is easy to use. Tungsten carbide blades built for extremely tough materials.

 

Black & Decker BDCMTTS Matrix Saw Replacement 3-3/8″ 24t Carbide Blade # 90585148 - Includes (1), 3-3/8″ 24t carbide blade # 90585148 genuine oem replacement part new, oem bulk packed please refer to list below for compatibility black and decker bdcmtts type 1 trim saw multi-tool attachment.

 

Fein 63502125020 Thin Carbide Blade 3 pack - For removal of thin grout joints sucha s 4 x 4 tiles. Recessed for flush cutting such as along a shower floor. Removes grout without damaging surrounding tiles. Perfect for your home renovation. Also used for plunge cutting into drywall and cutting porous concrete blocks.

 

FEIN THICK CARBIDE BLADE- - For use with the fein multimaster tool. Thick carbide saw blade for removing grout, cutting out tile joints, and cutting plaster, porous concrete and similar construction materials.

 

Ryobi HPL51K Planer (10 Pack) Replacement 3-1/4″ Carbide Blade # 690861001-10pk - Fits fein, bosch, makita, dewalt, rockwell, porter-cable, milwaukee, craftsmen, genesis, & more. One fit arbor. Adaptor included to fit dremel quick release and old rockwell. Made in usa.

 

3-Pack 45 Degree Roland Type Cemented Carbide Blade Set - Pack of 3 roland cemented carbide blades. These blades are compatible with the us cutter mh series vinyl cutters, the pcut cutters, the laserpoint cutters, and the copam cutters. 25, 450-1500. 45 degrees. Knifepoint offset 0. .

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.