1/4″ 2-Flute Solid Carbide Straight Plunge Cutting Router Bit–1/4″ Shank
- 2 flutes. 2-1/2 overall length. Solid carbide.
Amana Tool 45205 Solid Carbide Straight Plunge High Production 1/4 D x 1 CH x 1/4 Inch SHK Router Bit
- Straight plunge cutting router bits-1/4 shank-2 flute, high production.
10pcs 8.1mm – 9mm Set Solid Carbide Straight Shank Twist Drill Bit
- 8mm , 8. If there is anything you need, do not hesitate to contact us. 6mm , 8. 3mm , 8. Brand new 10pcs 8. 9mm , 9mm (1pcs of each). There are a variety of sizes available but they are not all listed. 1mm, 9mm set solid carbide straight shank twist drill bit , meterial solid carbide , sizes include 8. 5mm , 8. 2mm , 8. 1mm , 8. Please check out our store for other size. 4mm , 8. 7mm , 8.
Amana Tool 43824 Solid Carbide Straight Plunge 1/4 D x 1 CH x 1/4 SHK x 2-1/2 Inch Long Router Bit
- Smooth and precise cut exceptional chip ejection to allow cleaner and more constant cutting. Cmt bits were rated the best overall in comparison to other brand (test by wood magazine). To be used on wood and wood composites. Solid carbide. Makes right-angle joints, box joints, mortise and tenons, rabbets, union, tongue and groove joints.
EnPointâ„¢ Teflon Coating Carbide 2 Flutes Straight Flush Tim Bit 1/4″ Shank 3/8″ Cut Dia 30mm Cut Height CNC Flakeboard Plywood Dado Plunge Router Bit Woodwork Grooving Slotting Cutter
- For straight and square cuts, making dadoes and grooves two cuts yield a smooth surface. Carbide-tipped cutting edge for a tendency to stay sharper and clean edges. Plunging tight corners and confined areas, sign-making, routing letter edges. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Teflon painting on the tool bit for preventing stickness, thus easier and smoother chip evacuation.
CMT 811.020.11, Solid Carbide Straight Bit, 1/4-Inch Shank, 2mm Diameter
- To be used on wood and wood composites. Cmt bits were rated the best overall in comparison to other brand (test by wood magazine). Smooth and precise cut exceptional chip ejection to allow cleaner and more constant cutting. Makes right-angle joints, box joints, mortise and tenons, rabbets, union, tongue and groove joints. 5/32-inch cutting length, 1-1/2-inch length 2 cutting edges.
DeWalt DW6120 Carbide Straight Double Flute Bit 1/4″
- Straight double flute bit 1/4″. Sizes include 31mm , 32mm , 33mm , 34mm , 35mm , 36mm , 37mm , 38mm , 39mm , 4mm (1pcs of each). Meterial solid carbide.
CMT 811.032.11, Solid Carbide Straight Bit, 1/4-Inch Shank, 1/8-Inch Diameter
- Smooth and precise cut exceptional chip ejection to allow cleaner and more constant cutting. Makes right-angle joints, box joints, mortise and tenons, rabbets, union, tongue and groove joints. 3/8-inch cutting length, 1-3/4-inch length, 2 cutting edges. To be used on wood and wood composites. Cmt bits were rated the best overall in comparison to other brand (test by wood magazine).
CMT 811.080.11, Solid Carbide Straight Bit, 1/4-Inch Shank, 5/16-Inch Diameter
- 3/4-inch cutting length, 2-inch length, 2 cutting edges. To be used on wood and wood composites. Cmt bits were rated the best overall in comparison to other brand (test by wood magazine). Makes right-angle joints, box joints, mortise and tenons, rabbets, union, tongue and groove joints. Smooth and precise cut exceptional chip ejection to allow cleaner and more constant cutting.
CMT 651.695.11 Insert Carbide Straight Bit with 3/8-Inch Diameter with 1/2-Inch Shank
- For work in laminated stock and hard and soft wood. 1-3/16-inch cutting length, 3-5/32-inch overall length. Super-strength steel body and 1 carbide-tipped cutting edge. Use in cnc or portable routers. Ideal for fast plunge cuts and other grooving applications.
CMT 811.060.11, Solid Carbide Straight Bit, 1/4-Inch Shank, 6mm Diameter for ply-groove
- Smooth and precise cut exceptional chip ejection to allow cleaner and more constant cutting. Cmt bits were rated the best overall in comparison to other brand (test by wood magazine). Makes right-angle joints, box joints, mortise and tenons, rabbets, union, tongue and groove joints. To be used on wood and wood composites. 5/8-inch cutting length, 2-inch length 2 cutting edges.
CMT 811.064.11, Solid Carbide Straight Bit, 1/4-Inch Shank, 1/4-Inch Diameter
- To be used on wood and wood composites. Cmt bits were rated the best overall in comparison to other brand (test by wood magazine). 3/4-inch cutting length, 2-inch length, 2 cutting edges. Smooth and precise cut exceptional chip ejection to allow cleaner and more constant cutting. Makes right-angle joints, box joints, mortise and tenons, rabbets, union, tongue and groove joints.
Vermont American 23014 VA Carbide Straight Set, 6-Piece
- Controlled depth of cut minimizes kickback. Precision ground carbide edges stay sharper. Includes 1 each 1/4-inch straight, 5/16-inch straight, 3/8-inch straight, 1/2-inch straight, 5/8-inch straight, 3/4-inch straight. Heat treated shanks for durability.
Kodiak Cutting Tools KCT140336 USA Made Solid Carbide Straight Flute Drill, 2 Flute, 1-1/8″ Length of Cut, 2-1/2″ Overall Length, 7/32″ Diameter
- . 7/32 inch diameter solid carbide drill, straight flute 1-1/8″ length of cut 2-1/2″ overall length 2 flute straight flute drill bit, carbide.
Amana Tool 43720 Solid Carbide Single Flute Straight Plunge High Production 1/4 D x 1 Inch CH x 1/4 SHK Router Bit
- Produced from a premium ultra-fine nano grade solid carbide for maximum tool strength and durability. There is a 5 degree slope with the chip groove, which is conductive to chip evacuation. Used for engraving and cutting a wide variety of materials bubble teflon plate, acrylic, fiber board, plywood, multilayer board, solid wood, sandwich panels and pvc etc. Solid carbide. High precision grinding and excellent surface finish a long cutting life with minimal sharpening, and also capable of cutting mortises.
CMT 811.032.11, Solid Carbide Straight Bit, 1/4-Inch Shank, 1/8-Inch Diameter by CMT
- 3/8-inch cutting length, 1-3/4-inch length, 2 cutting edgessmooth and precise cut exceptional chip ejection to allow cleaner and more constant cuttingto be used on wood and wood compositesmakes right-angle joints, box joints, mortise and tenons, rabbets, union, tongue and groove jointscmt bits were rated the best overall in comparison to other brand (test by wood magazine).
EnPointâ„¢ Woodworking Carbide 2-Flute Straight Grooving End Mill 15/64″ 6mm Shank 6mm Cut Dia 22mm Flute Precision Ground Straight Router Bit CNC Engraving Tool Bit for Joinery MDF Panel
- Produced from a premium ultra-fine nano grade solid carbide for maximum tool strength and durability. High precision grinding and excellent surface finish a long cutting life with minimal sharpening, and also capable of cutting mortises. There is a 5 degree slope with the chip groove, which is conductive to chip evacuation. Designed with 2 carbide flutes, it has precision ground for the smoothest possible cuts. Used for engraving and cutting a wide variety of materials bubble teflon plate, acrylic, fiber board, plywood, multilayer board, solid wood, sandwich panels and pvc etc.
CMT 651.727.11 Insert Carbide Straight Bit with 1/2-Inch Diameter with 1/2-Inch Shank
- Use in cnc or portable routers. 1-31/32-inch cutting length, 4-1/16-inch overall length. Super-strength steel body and 1 carbide-tipped cutting edge. For work in laminated stock and hard and soft wood. Ideal for fast plunge cuts and other grooving applications.
CMT 811.564.11, Solid Carbide Straight Bit, 1/2-Inch Shank, 1/4-Inch Diameter for Incra Jigs
- Cmt bits were rated the best overall in comparison to other brand (test by wood magazine). 3/4-inch cutting length, 2-1/4-inch length, 2 cutting edges. Smooth and precise cut exceptional chip ejection to allow cleaner and more constant cutting. To be used on wood and wood composites. Makes right-angle joints, box joints, mortise and tenons, rabbets, union, tongue and groove joints.
SKIL 91001 Carbide Straight Bit Set, 3-Piece
- Founded in 1924 as the michel electric handsaw company and renamed skilsaw, inc. In 1926, skil has become one of the most recognized and powerful brands in the power tool industry. From circular saws and jigsaws to sanders and drills, skil power tools are engineered to deliver the high-performance and durability that today’s growing population of do-it-yourselfers demand. Skil power tools are products of the robert bosch tool corporation. Every product of the growing line of skil tools is the result of extensive end-user research, consumer input, computer assisted design and rigorous testing, both in our laboratories and in the field.
EnPointâ„¢ Woodworking Carbide 2-Flute Straight Grooving Milling Bit 1/8″ Shank 1/8″ Cutter Dia 22mm Flute length Precision Ground Straight Bits Cutting Joinery Grooves Rabbets CNC Engraving Tool Bit for Acrylic PVC MDF Plywood Solid Wood Panels
- There is a 5 degree slope with the chip groove, which is conductive to chip evacuation. Designed with 2 carbide flutes, it has precision ground for the smoothest possible cuts. High precision grinding and excellent surface finish long cutting life with minimal sharpening, and also capable of cutting mortises. Produced from a premium ultra-fine nano grade solid carbide for maximum tool strength and durability. Used for engraving and cutting a wide variety of materials bubble teflon plate, acrylic, fiber board, plywood, multilayer board, solid wood, sandwich panels and pvc etc.
CMT 811.081.11, Solid Carbide Straight Bit, 1/4-Inch Shank, 5/16-Inch Diameter for Leigh Jig
- Smooth and precise cut exceptional chip ejection to allow cleaner and more constant cutting. Makes right-angle joints, box joints, mortise and tenons, rabbets, union, tongue and groove joints. 1-inch cutting length, 2-3/16 inch length, 2 cutting edges. Cmt bits were rated the best overall in comparison to other brand (test by wood magazine). To be used on wood and wood composites.
CMT 812.060.11, Solid Carbide Straight Bit, 1/4-Inch Shank, 15/64-Inch Diameter
- To be used on wood and wood composites. Cmt bits were rated the best overall in comparison to other brand (test by wood magazine). Makes right-angle joints, box joints, mortise and tenons, rabbets, union, tongue and groove joints. 1-inch cutting length, 2-3/8-inch length, 2 cutting edges. Smooth and precise cut exceptional chip ejection to allow cleaner and more constant cutting.
EnPointâ„¢ Woodworking Carbide 2-Flute Straight Grooving CNC Milling Bit 5/32″ 4mm Shank 4mm Cutter Dia 22mm Flute Precision Ground Straight Bits Cutting Joinery Grooves Rabbets Engraving Tool Bit for Acrylic PVC MDF Plywood Solid Wood Panels
- There is a 5 degree slope with the chip groove, which is conductive to chip evacuation. High precision grinding and excellent surface finish a long cutting life with minimal sharpening, and also capable of cutting mortises. Designed with 2 carbide flutes, it has precision ground for the smoothest possible cuts. Produced from a premium ultra-fine nano grade solid carbide for maximum tool strength and durability. Used for engraving and cutting a wide variety of materials bubble teflon plate, acrylic, fiber board, plywood, multilayer board, solid wood, sandwich panels and pvc etc.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
