Grobet Swiss Pattern File Pillar Regular 6 Inch Cut 0
- Used by professionals. These files are parallel in width and tapered in thickness to make possible perfectly flat filing double cut top and bottom, both edges are safe 33/64″ wide x 5/32″ thick. “Swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made.
Grobet Swiss Pattern Needle File Inox 18 CM Set of 6 Cut 2
- Grobet usa inox precision needle files, know as “the file with the yellow tang”. High performance files for platinum, stainless steel, exotic plastics, and other hard to file materials. Overall length is 7″ (180 mm). Little or no clogging, a simple knock removes the chips. With rockwell hardness 72hrc a- the hardest surface known, these files have a longer life than standard files. Highly resistant to corrosion. Consists of all 6 shapes, barrette, equalling, half-round, round, square and three-square.
Grobet Swiss Pattern File Round 6 Inch Cut 4
- “Swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Gradually tapered and cut and workable to the end used where it is necessary to enlarge a hole or round off a radius double cut 1/4″ in diameter. Used by professionals.
Grobet Swiss Pattern File Pillar Checkering 6 Inch Cut 1 40 lines per inch
- Parallel in width and gently tapered in thickness overcut is parallel to file edges and upcut is 90 degree to overcut useful for putting serrations on knife edges and to obtain a checkered design similar to a gun hand grip double cut top and bottom both edges are safe 40 lines per inch 1/2″ wide x 5/32″ thick. “Swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Used by professionals.
Grobet Swiss Pattern File Hand 4 Inch Cut 0
- Used by professionals. “swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Parallel in width and tapered in thickness double cut top and bottom one edge is single cut one edge is safe 1/2″ wide x 1/8″ thick.
Grobet Swiss Pattern File Escapement 5-1/2″ Round Cut 8
- “swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Also known as square handled needle files, these precision files are available in most of the needle file shapes length of cut is 1-9/16″ to 2-9/16″ (397 to 651 mm) depending upon shape. Used by professionals.
Grobet Swiss Pattern File Escapement 5-1/2″ Round Cut 2
- Used by professionals. “swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Also known as square handled needle files, these precision files are available in most of the needle file shapes length of cut is 1-9/16″ to 2-9/16″ (397 to 651 mm) depending upon shape.
Grobet Swiss Pattern Needle File 6-1/4 Inch Three Square Cut 2
- Precision files, for exacting work, especially under magnification made of the highest quality steel, machined and finished for precision shape, accuracy and balance. Used by professionals. “swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made.
Grobet Swiss Pattern Needle File 4 Inch Knife Cut 2
- Precision files, for exacting work, especially under magnification made of the highest quality steel, machined and finished for precision shape, accuracy and balance 5/32″ wide x 3/64″ thick cut portions are 4″ files are 1-3/4″, 5-1/2″ files have a 2-1/2″ cut portion, 6-1/4″ has a 3″ cut portion and 7-3/4″ has a 4-1/8″ cut portion. Used by professionals. “Swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made.
Grobet Swiss Pattern File Checkerings Hand 6 Inch Cut 00 20 lines per inch
- Used by professionals. Parallel in width and gently tapered in thickness overcut is parallel to file edges and upcut is 90 degree to overcut useful for putting serrations on knife edges and to obtain a checkered design similar to a gun hand grip double cut top and bottom both edges are safe 20 lines per inch 45/64″ wide x 5/32″ thick. “swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made.
Ergo Grip Swiss Pattern File Half Round Cut 1
- The distinctive design includes a built-in handle, so there’s no separate handle to buy and they’re shaped for easy handling and balanced for efficient cutting. . For a complete set of 5, see part number 33831 (cut 00) or 33832 (cut 1). These strong, durable files are ideal for a variety of uses. 15/32″ wide x 9/64″ thick. Ergo grip files offer the craftsman something different precision files designed for those “in-between” jobs, too big for needle files and requiring finer control than a larger, heavier file can deliver. Length of cut is 4″ (10 cm) and the overall length is 8-1/2″ (22 cm).
Grobet Swiss Pattern File Pillar Checkering 6 Inch Cut 00 20 lines per inch
- “Swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Parallel in width and gently tapered in thickness overcut is parallel to file edges and upcut is 90 degree to overcut useful for putting serrations on knife edges and to obtain a checkered design similar to a gun hand grip double cut top and bottom both edges are safe 20 lines per inch 1/2″ wide x 5/32″ thick. Used by professionals.
Grobet Swiss Pattern File Screwhead With Tang 3 Inch #6
- Used for filing slots in small screws available in thicknesses ranging from no1 (thickest) to no8 (thinnest) single cut on both edges both sides are safe 018″ thick 25/64″ wide. “Swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Used by professionals.
Grobet Swiss Pattern File Round Parallel 4×1/16 Inch Cut 2
- Cut over the entire surface (does not taper to point) double cut. “Swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Used by professionals.
Grobet Swiss Pattern File Checkerings Hand 6 Inch Cut 0 30 lines per inch
- Used by professionals. “Swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Parallel in width and gently tapered in thickness overcut is parallel to file edges and upcut is 90 degree to overcut useful for putting serrations on knife edges and to obtain a checkered design similar to a gun hand grip double cut top and bottom both edges are safe 30 lines per inch 45/64″ wide x 5/32″ thick.
Grobet Swiss Pattern File Pippin 6 Inch Cut 4
- Tapered in width and thickness combines the cross-sections of the round file, with the crossing file, along with the edge of a knife file for finishing the junction of two different curved surfaces and for opening slots when a “v” shape is required double cut on both sides top and bottom edge are single cut these files are widely used as a locksmith tool for impressioning 3/8″ wide x 11/64″ thick. “Swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Used by professionals.
Grobet Swiss Pattern File Pillar Regular 8 Inch Cut 4
- These files are parallel in width and tapered in thickness to make possible perfectly flat filing double cut top and bottom, both edges are safe 19/32″ wide x 13/64″ thick. “swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Used by professionals.
Grobet Swiss Pattern File Inox Needle 7″ Half Round Cut 2
- For platinum, stainless steel, exotic plastics, and other hard to file materials the hardest surface known -rockwell hardness 72hrc better performance on hard-to-file surfaces little or no clogging a simple knock is enough to remove the chips highly resistant to corrosion longer life than standard files. Used by professionals. “swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made.
Grobet Swiss Pattern File Pillar Extra Narrow 4 Inch Cut 00
- “swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Used by professionals. These files are parallel in width and tapered in thickness to make possible perfectly flat filing double cut top and bottom, both edges are safe 9/64″ wide x 1/16″ thick.
Grobet Swiss Pattern File Diesinker Riffler #986 or #546 6 Inch Cut 0
- A comprehensive selection of precision rifflers all are double-ended and 6″ (152 mm) long used by moldmakers, tool and die makers, jewelers, gunsmiths, and hobbyists. “Swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Used by professionals.
Grobet Swiss Pattern File Hand 6 Inch Cut 1
- Parallel in width and tapered in thickness double cut top and bottom one edge is single cut one edge is safe 45/64″ wide x 5/32″ thick. “Swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Used by professionals.
Grobet Swiss Pattern File Escapement 5-1/2″ Round Cut 4
- Used by professionals. “Swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Also known as square handled needle files, these precision files are available in most of the needle file shapes length of cut is 1-9/16″ to 2-9/16″ (397 to 651 mm) depending upon shape.
Grobet Swiss Pattern File Checkerings Hand 6 Inch Cut 2 50 lines per inch
- Parallel in width and gently tapered in thickness overcut is parallel to file edges and upcut is 90 degree to overcut useful for putting serrations on knife edges and to obtain a checkered design similar to a gun hand grip double cut top and bottom both edges are safe 50 lines per inch 45/64″ wide x 5/32″ thick. “swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Used by professionals.
Grobet Swiss Pattern File Hand 6 Inch Cut 6
- “Swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Used by professionals. Parallel in width and tapered in thickness double cut top and bottom one edge is single cut one edge is safe 45/64″ wide x 5/32″ thick.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
