Top 23 for Best Mag Drill

 

Fein 3 Inch By 2 Inch Automatic Feed Mag Drill - Spindle travel 11-3/16. Stroke length 5-11/16. Holding force 4050 lb. Amps 1500 a. Speed 110 rpm [min], 160 rpm [min], 350 rpm [min], 180 rpm [max], 260 rpm.

 

Jancy JMH1200 Portable Magnetic-Base Drill, Hydraulic Motor, 2″ Diameter x 2″ Depth Capacity - Magnetic field detection, integrated chip guard, and safety strap, to help ensure safe working environments. Operates at speeds up to 1100 rpms. Hydraulic motor for use in non-sparking environments or underwater at depths up to 450′. 2″ maximum cutting diameter,2″ maximum cutting depth, and 600 lb drill point breakaway on 1″ thick steel. 1/2″ nptf hydraulic port adapter has two ports port a (clockwise) and port b (counter-clockwise).

 

Zenith Industries ZN510002 Mag Drill Coolant Kit - . This pressurized coolant delivery kit is designed for use with the zenith compact magnetic drill (510001). This kit is easy to install and can be used with water or water soluble cutting fluid.

 

Hougen HMD917SC Magnetic Drill Swivel – 115V – 0917104 - . • weight 46 lbs (20. • Two speed gear box, 250 & 450 rpm• pilot light • positive slug ejection• two stage magnet. Engages full power when motor is turned on• many accessories are available for a portable machine shop including drill chucks, tapping, countersink, and more. 9 kg)• cutter dia max 2-3/8″ (60mm)• depth of cut max 3″ (76mm).

 

HOUGEN HMD905 MAG DRILL FABRICATORS KIT FRACTIONAL MORE POWERFUL THAN A HMD904! - Pilot light, for low light or no light conditions. Many accessories are available for a portable machine shop including drill chucks, tapping, countersink, and more. Two speed gear box, 250 & 450 rpm. Powerful high torque hougen motor and gears. Large 1-5/8″ x 2″ capacity.

 

Hougen HMD904 MAG DRILL – SWIVEL/COOLANT – 230V (0904204) - Simple driller, no-load speed 0-400 / 0-1200 rmp to help you repair small furniture, complete the manual work. Confident commitment to long-term warranty 3-year warranty on tool and 1-year warranty on battery. New battery group, fast charging, stable and efficient output, to ensure adequate power output. Compact, lightweight (46 lb) fits into tight areas design, small size, easy to control sharp bit, easy to operate. 1 / 2-inch single sleeve ratcheting chuck provides tight bit gripping strength make sure it’s not easy to shift when it works, and increasing the degree of orientation.

 

Hougen HMD905 MAG DRILL 2 spd – 115V – 0905102 – More Powerful and More Features than a HMD904 - Many accessories are available for a portable machine shop including drill chucks, tapping, countersink, and more. Large 1-5/8″ x 2″ capacity, powerful high torque hougen motor and gears, two speed gear box, 250 & 450 rpm. Integrated coolant bottle, feed handles quickly change from side to side, lift detector safety system, rear mounted controls. Pilot light, for low light or no light conditions, two stage magnet, 30% increase in power when motor is turned on, positive slug ejection.

 

Jancy USA-5 Portable Magnetic-Base Drill, 120V, 11.7 Amp Motor, 2-3/8″ Diameter x 3″ Depth Capacity - 120v, 117 amp magnetic-base drill press with 18 horsepower (hp) 1400 watt single-phase motor weighs 51 lb. Magnetic field detection, integrated chip guard, and safety strap, to help ensure safe working environments. 2 speed gear box for 270 or 520 rpms. 2-3/8″ maximum cutting diameter and 3″ maximum cutting depth. 2320 lb magnet dead lift and 950 lb drill point breakaway on 1″ thick steel.

 

Hougen HMD115 MAG DRILL – ULTRA LOW PROFILE – 230V (0115201) - Identical match for most standard tamper resistance german makes star 6 point also accessible to many other protected components. Variety sizes, multifunction, security tamper resistant 6 point star torx bit set set contains t4- 128 mm, t5- 142 mm, t6- 170 mm, t7- 199 mm, t8- 231 mm, t9- 250 mm, t10- 274 mm, t15- 327 mm, t20- 386 mm, t25- 443 mm, t27- 499 mm, t30- 552 mm, t40- 665 mm. 1″ length, holder sleeve, 1/4″ shank hex bits in sizes clicks onto most standard sockets, screwdrivers, drill/driver kits & power tools attachments the whole in the center in each bit causes it to be tamper resistance. Intended uses commonly used for body & trim pieces, interior frames and electrical sensors. Sturdy hardened & tempered construction made with high grade s2 steel material for a long lasting existence molded red plastic bit holder included made in taiwan.

 

Steelmax SM-D1 Auto Semi-Automatic Magnetic Drilling Machine - The d1 auto advanced semi-automatic drilling machine is the ideal solution for efficiently drilling large numbers of holes in plates, girders and other steel structures. . Its large 1-3/8″ x 2″ capacity covers a wide range of drilling needs in a compact, rugged machine.

 

Champion Cutting Tool RotoBrute MightiBrute AC50 Portable Magnetic Drill Press: Up to 2-1/8″ diameter, 2″ depth of cut - Quick change arbor allows for fast cutter change easily converts from annular cutters to twist drills with qx1234 drill/chuck adaptor. Recommended for use with champion cutting tool rotobrute annular cutters. Includes carrying case, hex keys, safety chain, external coolant bottle, safety guard, quick change arbor, removable handle, qx1234 drill/chuck adaptor. Powerful, lightweight 33 lbs, magnetic strength 3370 lbs, 2 speed motor 450/300 rpm. Cutter capacity 2-1/8″ diameter, 2″ depth of cut.

 

Hougen HMD927 MAG DRILL – 2 SPD/PWR FEED/SWIVEL/COOLANT – 115V (0927104) - Variety sizes, multifunction, security tamper resistant 6 point star torx bit set set contains t4- 128 mm, t5- 142 mm, t6- 170 mm, t7- 199 mm, t8- 231 mm, t9- 250 mm, t10- 274 mm, t15- 327 mm, t20- 386 mm, t25- 443 mm, t27- 499 mm, t30- 552 mm, t40- 665 mm. Intended uses commonly used for body & trim pieces, interior frames and electrical sensors. Hougen® heavy-duty magnetic drill press has a powerful high-torque motor and 2-speed gear box that. 1″ length, holder sleeve, 1/4″ shank hex bits in sizes clicks onto most standard sockets, screwdrivers, drill/driver kits & power tools attachments the whole in the center in each bit causes it to be tamper resistance. Identical match for most standard tamper resistance german makes star 6 point also accessible to many other protected components.

 

BLACK BLUEROCK ® Tools Model BRM-35A Typhoon Magnetic Drill Roto-Broach - W. 28 lbs o stroke 6. Also note that only short bits can fit with the free chuck attached as there is only 3. W. 37 lbs o n. 5″ o size 19″ x 15″ x 8″ standard twist drill bit capacity (with free chuck) up to 1″ with step drilling. Generally customers use smaller than 7/16″ standard twist drills bits with this machine. 5″ from magnetic base to bottom of the chuck. • Specifications o drilling capacity 7/16″-1 1/2″ o drilling depth 2″ o tool holder direct arbor with ¾” weldon shank o motor data 110v/ac 60hz o speed 570 revolutions per/min o magnetic adhesion 2600 ft/lbs o g.

 

Zenith Industries ZN510001 Compact Magnetic Drill - Quick change weldon chuck for simple fast cutter change outs. Low profile design allows for use in work areas where conventional drills won’t fit. Built in overload protection. Led light for dark work area illumination. Super strong 3,372 lb magnetic adhesion allows use in both horizontal and vertical positions.

 

Hougen HMD904 MAG DRILL – SWIVEL BASE – 115V (0904103) - Dual rail guide system provides extraordinary stiffness and maintenance-free operation. Hougen® heavy-duty magnetic drill press has a powerful high-torque motor and 2-speed gear box that. Large integrated coolant tank. Industry leading cycle times with both hss and tct cutters. Integrated cutter guard.

 

Jancy Holemaker II Portable Magnet-Base Drill, 120V, 11.5 Amp Motor, 1-3/8″ Diameter x 2″ Depth Capacity - Magnetic field detection, integrated chip guard, and safety strap, to help ensure safe working environments. 1-3/8″ maximum cutting diameter and 2″ maximum cutting depth. Powerful magnet with compact dimensions, for fabricating in confined spaces. 2350 lb magnet dead lift and 1095 lb drill point breakaway on 1″ thick steel. 120v, 115 amp magnetic-base drill press with 175 horsepower (hp) 1380 watt single-phase motor weighs 30 lb.

 

NEW! BLACK BRM-60A-B – BLUEROCK ® Tools Magnetic Drill – Mag Drill Typhoon Model - 72 lbs o n. W. It comes with a plastic case (for protection during shipping), oil bottle, safety chain, mt key, 2pc mt adapters mt3 chuck, chuck key, mt3 weldon shank and hex wrenches. The bit and broach in the pictures are also not included. Typhoon model brm60b magnetic drill by bluerock ® tools reversible drill with two speeds · specifications o drilling capacity annular cutters 7/16″, 2-1/4″ (12mm-60mm) o drilling capacity twist drill bit 1-1/4″ (32mm) o drilling depth 2″ (50mm) o tool holder mt3 with 2pc mt adapters (mt3-mt2 and mt2-mt1) mt3 3/4″ weldon shank (for standard annular cutters) mt3 3/4″ capacity drill chuck (for twist drill bits) o motor data 120v/ac 60hz, 1850w o duel speed 260 & 470 revolutions per/min o reversible o magnetic adhesion 4050 lbs o g. 52 lbs o stroke 7. W. We do however sell sets of annular cutters/broaches in hss> for shipping outside of continental united states please contact for shipping quotation, if not otherwise specified in item description. 75″ this is a brand new magnetic drill with one of the largest drilling diameters in it’s class.

 

Hougen HMD904 MAG DRILL – SWIVEL/COOLANT – 115V (0904104) - Integrated cutter guard. Large integrated coolant tank. Hougen® heavy-duty magnetic drill press has a powerful high-torque motor and 2-speed gear box that. Dual rail guide system provides extraordinary stiffness and maintenance-free operation. Industry leading cycle times with both hss and tct cutters.

 

CAYKEN Magnetic Core Drill SCY-42HD(core bit not included) - 65″(-42mm) rated voltage110v max. Attraction15600n rated input power1700w no-load speed100-450r/min if you want other rated voltage for 220v or 240v, or other kind plug for ep,cn,gb,us, please leave message to us. They are convenient and small,and can reducing work force and improve the machining accuracy and effiency largest drill -1. Magnetic drill is a kind of electric tool for adhering and drilling on the horizontal level,side face and top face,and widely used in the building,bridge building,and ship building industries and so on. You can use the magnetic drill when you can not use drill press and electric hand drill to drill huge steel workpieces or in field operation. We provide special order.

 

Hougen HMD904 MAG DRILL – FABRICATOR’S KIT METRIC – 230V (0904208) - Identical match for most standard tamper resistance german makes star 6 point also accessible to many other protected components. Intended uses commonly used for body & trim pieces, interior frames and electrical sensors. 1″ length, holder sleeve, 1/4″ shank hex bits in sizes clicks onto most standard sockets, screwdrivers, drill/driver kits & power tools attachments the whole in the center in each bit causes it to be tamper resistance. Sturdy hardened & tempered construction made with high grade s2 steel material for a long lasting existence molded red plastic bit holder included made in taiwan. Variety sizes, multifunction, security tamper resistant 6 point star torx bit set set contains t4- 128 mm, t5- 142 mm, t6- 170 mm, t7- 199 mm, t8- 231 mm, t9- 250 mm, t10- 274 mm, t15- 327 mm, t20- 386 mm, t25- 443 mm, t27- 499 mm, t30- 552 mm, t40- 665 mm.

 

Hougen HMD905 MAG DRILL – FABRICATOR’S KIT FRACTIONAL – 115V (0905105) - Pilot light, for low light or no light conditions. Large 1-5/8″ x 2″ capacity. Many accessories are available for a portable machine shop including drill chucks, tapping, countersink, and more. Two speed gear box, 250 & 450 rpm. Powerful high torque hougen motor and gears.

 

Jancy Magforce Portable Magnetic-Base Drill, 120V, 10.2 Amp Motor, 1-5/8″ Diameter x 2″ Depth Capacity - Stationary motor ensures the working height remains constant. 120v, 102 amp magnetic-base drill press with 16 horsepower (hp) 1200 watt single-phase motor weighs 27 lb. 1-5/8″ maximum cutting diameter and 2″ maximum cutting depth. Magnetic field detection, integrated chip guard, and safety strap, to help ensure safe working environments. 1810 lb magnet dead lift and 1096 lb drill point breakaway on 1″ thick steel.

 

Jancy 4×4 Portable Magnetic-Base Drill, 240V, 5.8 Amp Motor, 4″ Diameter x 3″ Depth Capacity - Four-speed gear box for 100, 150, 200 or 310 rpms. 240v, 58 amp magnetic-base drill press with 18 horsepower (hp) 1400 watt single-phase motor weighs 73 lb. 4″ maximum cutting diameter and 3″ maximum cutting depth. 4833 lb magnet dead lift and 1934 lb drill point breakaway on 1″ thick steel. Magnetic field detection, integrated chip guard, and safety strap, to help ensure safe working environments.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.