Top 23 Bowl Router Bits

 

Bosch 85648M 78-Inch Diameter 1516-Inch Cut Carbide Tipped Flush Mount Bowl Router Bit 12-Inch Shank With Bearing

Bosch 85648M 7/8-Inch Diameter 15/16-Inch Cut Carbide Tipped Flush Mount Bowl Router Bit 1/2-Inch Shank With Bearing

Bosch 85648M 7/8-Inch Diameter 15/16-Inch Cut Carbide Tipped Flush Mount Bowl Router Bit 1/2-Inch Shank With Bearing - Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.

 

Bosch 85661M 2-18-Inch Diameter 1-14-Inch Cut Carbide Tipped Roundover Bowl Router Bit 12-Inch Shank

Bosch 85661M 2-1/8-Inch Diameter 1-1/4-Inch Cut Carbide Tipped Roundover Bowl Router Bit 1/2-Inch Shank

Bosch 85661M 2-1/8-Inch Diameter 1-1/4-Inch Cut Carbide Tipped Roundover Bowl Router Bit 1/2-Inch Shank - All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.

 

MLCS 9179 Bowl And Tray Template Kit with Router Bit

MLCS 9179 Bowl And Tray Template Kit with Router Bit

MLCS 9179 Bowl And Tray Template Kit with Router Bit - Make a very unique candy dish or snack tray. 5 templates create 10 styles. Easy to use. Router bit included.

 

Freud 85-003 2-Inch Diameter x 1-14 Round Over Bowl Router Bit with 12-Inch Shank Style 85-003 2-Inch Diameter x 1-14 Round Over Bowl Router Bit with 12-Inch Shank Model 85-003

Freud 85-003 2-Inch Diameter x 1-1/4 Round Over Bowl Router Bit with 1/2-Inch Shank Style: 85-003 2-Inch Diameter x 1-1/4 Round Over Bowl Router Bit with 1/2-Inch Shank Model: 85-003

Freud 85-003 2-Inch Diameter x 1-1/4 Round Over Bowl Router Bit with 1/2-Inch Shank Style: 85-003 2-Inch Diameter x 1-1/4 Round Over Bowl Router Bit with 1/2-Inch Shank Model: 85-003 - Application cuts all solid surface materials, hardwood and other composite materials. Features snap-lock bearing system. Use on hand-held portable routers. (Uses freud 62-110 bearing). Trims excess material when fabricating solid surface countertops with solid surface sink bowls.

 

Freud 85-315 15-Degree Bevel Euro Top Mount Bowl Router Bit with 12-Inch Shank Style 85-315 15-Degree Bevel Euro Top Mount Bowl Router Bit with 12-Inch Shank Model 85-315

Freud 85-315 15-Degree Bevel Euro Top Mount Bowl Router Bit with 1/2-Inch Shank Style: 85-315 15-Degree Bevel Euro Top Mount Bowl Router Bit with 1/2-Inch Shank Model: 85-315

Freud 85-315 15-Degree Bevel Euro Top Mount Bowl Router Bit with 1/2-Inch Shank Style: 85-315 15-Degree Bevel Euro Top Mount Bowl Router Bit with 1/2-Inch Shank Model: 85-315 - Routing cutouts for top mount european style bowls, or other bevel applications. Cuts all solid surface materials. Specially formulated carbide is ideal for fabricating solid surface materials. Use in hand-held portable routers.

 

Yonico 16170 Small Bowl Router Bit with 165-Inch Radius 1-34-Inch Wide and 12-Inch Shank

Yonico 16170 Small Bowl Router Bit with 1.65-Inch Radius, 1-3/4-Inch Wide and 1/2-Inch Shank

Yonico 16170 Small Bowl Router Bit with 1.65-Inch Radius, 1-3/4-Inch Wide and 1/2-Inch Shank - 65″ radius concave bowl or crater-like indents at 1-3/4″ diameter across and 1/4″ deep. 1/16″ thick carbide. May be plunged deeper to create side walls or shallower for a smaller diameter. Cnc compatible. Use the yonico 16170 router bit to create a 1. Blades meet in the center allowing true vertical plunging. .

 

Freud 85-001 2-Inch Round Over Bowl Router Bit with 12-Inch Shank

Freud 85-001 2-Inch Round Over Bowl Router Bit with 1/2-Inch Shank

Freud 85-001 2-Inch Round Over Bowl Router Bit with 1/2-Inch Shank - Precision ground for the smoothest cuts. Kickback reducing design. Covered by freud’s limited lifetime warranty. Individually computer balanced.

 

Wilsonart Bowl Router Bits solid surface - CD 2-38  R1 916  R2 NA  CL 78  P Roundovr

Wilsonart Bowl Router Bits (solid surface) – CD 2-3/8 | R1 9/16 | R2 NA | CL 7/8 | P Roundovr

Wilsonart Bowl Router Bits (solid surface) – CD 2-3/8 | R1 9/16 | R2 NA | CL 7/8 | P Roundovr - Se2970 and se2972 are 12 degrees and se2974 is 13 degrees. Select your item(s) then click add to cart. All solid surface router bits have a 1/2 inch shank. Legend below explains sizing. These wilsonart bowl solid surface router bits are carbide-tipped industrial quality bits manufactured in the usa. By southeast tool. Se2970 is for 1/2 inch to 1-1/4 inch countertop and se2972 and se2974 is for a 1/2 inch to 3/4 inch countertop. For replacement bearing order sbe149 and replacement screw order siwb-screw.

 

Amana Tool 57130 Carbide Tipped Undermount Bowl Solid Surface 2-14 D x 1-14 CH x 18 Deg Angle x 12 Inch SHK Router Bit

Amana Tool 57130 Carbide Tipped Undermount Bowl Solid Surface 2-1/4 D x 1-1/4 CH x 18 Deg Angle x 1/2 Inch SHK Router Bit

Amana Tool 57130 Carbide Tipped Undermount Bowl Solid Surface 2-1/4 D x 1-1/4 CH x 18 Deg Angle x 1/2 Inch SHK Router Bit - Undermount bowl router bits w/ ultra-glidetm bearing-roundover.

 

Magnate 3971 Roundover Undermount Bowl Router Bits - 1-14 Cutting Height 10 Degree

Magnate 3971 Roundover Undermount Bowl Router Bits – 1-1/4″ Cutting Height; 10 Degree

Magnate 3971 Roundover Undermount Bowl Router Bits – 1-1/4″ Cutting Height; 10 Degree - You may try the following suggestion. In case a bit doesn’t come with a speed chart. Excessive overall length may cause tool damage. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity.

 

Amana Tool 57269 Carbide Tipped Undermount Bowl Solid Surface 2-732 Dia x 6364 Cut Height x 18 Deg Angle x 12 Inch Shank Router Bit

Amana Tool 57269 Carbide Tipped Undermount Bowl Solid Surface 2-7/32 Dia x 63/64 Cut Height x 18 Deg Angle x 1/2 Inch Shank Router Bit

Amana Tool 57269 Carbide Tipped Undermount Bowl Solid Surface 2-7/32 Dia x 63/64 Cut Height x 18 Deg Angle x 1/2 Inch Shank Router Bit - Heavy duty tube for protection and storage. Bearing guided. Microgranular tungsten carbide tipped for sharpness and life. Anti-kickback for safety. Carbide tipped.

 

Freud 85-007 2-Inch Diameter x 1-14 Ogee Bowl Router Bit with 12-Inch Shank Style 85-007 2-Inch Diameter x 1-14 Ogee Bowl Router Bit with 12-Inch Shank Model 85-007

Freud 85-007 2-Inch Diameter x 1-1/4 Ogee Bowl Router Bit with 1/2-Inch Shank Style: 85-007 2-Inch Diameter x 1-1/4 Ogee Bowl Router Bit with 1/2-Inch Shank Model: 85-007

Freud 85-007 2-Inch Diameter x 1-1/4 Ogee Bowl Router Bit with 1/2-Inch Shank Style: 85-007 2-Inch Diameter x 1-1/4 Ogee Bowl Router Bit with 1/2-Inch Shank Model: 85-007 - Use on hand-held portable routers. Ideal for trimming solid surface countertops and sold surface sink bowls. Application cuts all solid surface materials, hardwood and other composite materials. Features snap-lock bearing system.

 

CMT 86660211 Solid Surface Rounding Over Bowl Router Bit WBearing 2-Inch Diameter 12-Inch Shank

CMT 866.602.11 Solid Surface Rounding Over Bowl Router Bit W/Bearing, 2-Inch Diameter, 1/2-Inch Shank

CMT 866.602.11 Solid Surface Rounding Over Bowl Router Bit W/Bearing, 2-Inch Diameter, 1/2-Inch Shank - 1-1/4-inch cutting lengh, 1/2-inch radius, 15° cutting angle, 3-13/64-inch overall length. Roundover and trim the countertop edges after the bowl is mounted. Features a non-marring delrin® bearing to protect the finished edges. 2 hi-density carbide-tipped cutting edges for long-lasting performance on wood. Anti-kickback design to work safely.

 

Freud 85-001 2-Inch Round Over Bowl Router Bit with 12-Inch Shank by Freud

Freud 85-001 2-Inch Round Over Bowl Router Bit with 1/2-Inch Shank by Freud

Freud 85-001 2-Inch Round Over Bowl Router Bit with 1/2-Inch Shank by Freud - Individually computer balanced. Precision ground for the smoothest cuts. Covered by freud’s limited lifetime warranty. Freud 85-001 2-inch round over bowl router bit with 1/2-inch shank.

 

Yonico 16181 Bowl Horizontal Crown Router Bit 2 Radius 12 Shank

Yonico 16181 Bowl & Horizontal Crown Router Bit 2″ Radius 1/2″ Shank

Yonico 16181 Bowl & Horizontal Crown Router Bit 2″ Radius 1/2″ Shank - Satisfaction guaranteed & limited lifetime warranty. This bowl and horizontal crown bit features a radius and cutting diameter of 2″ with a total cutting depth of 33/64″ the shank is 1/2″ in diameter. Perfect for creating large custom crown moldings, mancala game boards and coin trays. Cuts smoothly in solid wood and mdf/hdf. Premium c3 micro-grain center meeting carbide cutters with silver induction brazing for maximum strength.

 

Bosch 85662M 3-Inch Diameter 1-Inch Cut Carbide Tipped Ogee Undermount Bowl Router Bit 12-Inch Shank

Bosch 85662M 3-Inch Diameter 1-Inch Cut Carbide Tipped Ogee Undermount Bowl Router Bit 1/2-Inch Shank

Bosch 85662M 3-Inch Diameter 1-Inch Cut Carbide Tipped Ogee Undermount Bowl Router Bit 1/2-Inch Shank - All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.

 

Yonico 16171 Medium Bowl Router Bit with 222-Inch Radius 2-1532-Inch Wide and 12-Inch Shank

Yonico 16171 Medium Bowl Router Bit with 2.22-Inch Radius, 2-15/32-Inch Wide and 1/2-Inch Shank

Yonico 16171 Medium Bowl Router Bit with 2.22-Inch Radius, 2-15/32-Inch Wide and 1/2-Inch Shank - 22″ radius concave bowl or crater-like indents at 2-15/32″ diameter across and 3/8″ deep. May be plunged deeper to create side walls or shallower for a smaller diameter. Cnc compatible. Use the yonico 16171 router bit to create a 2. 1/2″ shank. Blades meet in the center allowing true vertical plunging. 1/16″ thick carbide.

 

CMT 86660211 Solid Surface Rounding Over Bowl Router Bit WBearing 2-Inch Diameter 12-Inch Shank by CMT Orange Tools

CMT 866.602.11 Solid Surface Rounding Over Bowl Router Bit W/Bearing, 2-Inch Diameter, 1/2-Inch Shank by CMT Orange Tools

CMT 866.602.11 Solid Surface Rounding Over Bowl Router Bit W/Bearing, 2-Inch Diameter, 1/2-Inch Shank by CMT Orange Tools - Features a non-marring delrin bearing to protect the finished edges. Anti-kickback design to work safely. 2 hi-density carbide-tipped cutting edges for long-lasting performance on wood. . Roundover and trim the countertop edges after the bowl is mounted. 1-1/4-inch cutting lengh, 1/2-inch radius, 15 cutting angle, 3-13/64-inch overall length.

 

Yonico 16182 Bowl Horizontal Crown Router Bit 2-14 Radius 12 Shank

Yonico 16182 Bowl & Horizontal Crown Router Bit 2-1/4″ Radius 1/2″ Shank

Yonico 16182 Bowl & Horizontal Crown Router Bit 2-1/4″ Radius 1/2″ Shank - This bowl and horizontal crown bit features a radius and cutting diameter of 2-1/4″ with a total cutting depth of 9/16″ the shank is 1/2″ in diameter. Cuts smoothly in solid wood and mdf/hdf. Premium c3 micro-grain center meeting carbide cutters with silver induction brazing for maximum strength. Perfect for creating large custom crown moldings, mancala game boards and coin trays. Satisfaction guaranteed & limited lifetime warranty.

 

Freud 85-009 15-Degree Bevel Bowl Router Bit with 12-Inch Shank Style 85-009 15-Degree Bevel Bowl Router Bit with 12-Inch Shank Model 85-009

Freud 85-009 15-Degree Bevel Bowl Router Bit with 1/2-Inch Shank Style: 85-009 15-Degree Bevel Bowl Router Bit with 1/2-Inch Shank Model: 85-009

Freud 85-009 15-Degree Bevel Bowl Router Bit with 1/2-Inch Shank Style: 85-009 15-Degree Bevel Bowl Router Bit with 1/2-Inch Shank Model: 85-009 - Individually computer balanced. Covered by freud’s limited lifetime warranty. Precision ground for the smoothest cuts. Kickback reducing design.

 

Yonico 16172 Large Bowl Router Bit with 27-Inch Radius 2-34-Inch Wide and 12-Inch Shank

Yonico 16172 Large Bowl Router Bit with 2.7-Inch Radius, 2-3/4-Inch Wide and 1/2-Inch Shank

Yonico 16172 Large Bowl Router Bit with 2.7-Inch Radius, 2-3/4-Inch Wide and 1/2-Inch Shank - May be plunged deeper to create side walls or shallower for a smaller diameter. . Cnc compatible. 7″ radius concave bowl or crater-like indents at 2-3/4″ diameter across and 3/8″ deep. 1/16″ thick carbide. Blades meet in the center allowing true vertical plunging. Features • 1/2″ shank • industrial quality • c3 tungsten carbide cutters • solid hardened steel body • anti-kickback design • build-up resistant coating • lifetime warranty • satisfaction guaranteed use the yonico 16172 router bit to create a 2.

 

Amana Tool 57158 Carbide Tipped Undermount Bowl Solid Surface 2 D x 1116 CH x 14 Deg Angle x 12 Inch SHK Router Bit

Amana Tool 57158 Carbide Tipped Undermount Bowl Solid Surface 2 D x 11/16 CH x 14 Deg Angle x 1/2 Inch SHK Router Bit

Amana Tool 57158 Carbide Tipped Undermount Bowl Solid Surface 2 D x 11/16 CH x 14 Deg Angle x 1/2 Inch SHK Router Bit - 874-s w/ ultra-glidetm bearing-roundover. Undermount bowl router bits for corian® bowl no.

 

Magnate 3058 Overhang Bowl Router Bits - 116 Overhang Depth 34 Overall Diameter

Magnate 3058 Overhang Bowl Router Bits – 1/16″ Overhang Depth; 3/4″ Overall Diameter

Magnate 3058 Overhang Bowl Router Bits – 1/16″ Overhang Depth; 3/4″ Overall Diameter - In case a bit doesn’t come with a speed chart. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. You may try the following suggestion. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is suited for softwoods, hardwoods, chipboard, plywood and etc. It is also equipped with wide open gullets for easy disposal of wood chips. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Excessive overall length may cause tool damage.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.