Top 22 Toolholders

 

Dorian Tool D1 Square Shank Chromium Molybdenum Alloy Steel Quick Change Turning and Facing Toolholder for SDN35CXA Super Quick Change Tool Post, 3/4″ – 1″ Tool Capacity, 3-3/4″ Width, 1-1/2″ Height - Quick change mounting. Cnc precision ground and qualified for accuracy and super precise tool change repeatability within 00001″. Applicable for holds square shank tools, turning and facing, threading and grooving, cut-off applications. High tensile strength chromium molybdenum alloy steel. Thru hardened, ion-nitrided, and black oxide coated.

 

Toolholder, V Groove Toolholder, AXA, 0.937 - Chuck hole er11 standard taper holes correct installation can be achieved using precisionultimate. Shaft hole diamter8mm,tolerance -002mm (actual 798mm)it requires heating when installating. Diameter16mm,overall length 35mm,including the length of the threaded portion. V groove toolholder. Note for the accuracy of concentricity of the sleeve itself, to reach the inner 001-0015mmbut th.

 

Anvil, Toolholder SER1000M27 - Increases productivity of all lathe operations. Maximum rigidity for chatter-free performance. All working parts hardened and ground. Completely sealed for maintenance-free operation. Change tools in seconds no time wasted with shims.

 

Beta C57P O Panel Toolholder Mastercargo, Orange Color, Empty - This is a made from heavy-duty steel construction as evident by the empty weight of 101 lbs. The aluminum shutter door comes with two keys and easily rolls up and down. The beta tools of italy c57p tool storage unit is a wall panel made so that you don’t have to remove your tools from a pegboard to secure them. 3” deep. . A general assortment of pegs and clips for your tools are included but we also sell more if you need them. It is 37 inches high, 67 inches long and 6. This one-of-a-kind wall unit keeps all your tools right in front of you while working on your workbench.

 

XNEMON Hypo 6x100mm S06H-SCLCR06 Index Inner Boring Bar Turning Toolholder For CCMT0602 - Product description toolholder size6x100 product application boring from light roughing to finishing in small bore dirctionright hand product features profiling bar for semi-finishing and finishing operations bar hardness approximately 45hrc extreme gloss finish positive 80 degree diamond ccmt insert insert grade ybc251 chip breaker hm material carbide coating cvd tin al2o3 ticn machining parts material steel alloy machining process semi-finish/medium packege content 1 x s06h-sclcr06 6x100mm boring bar 1pcs ccmt060204 carbide insert good quality for steel 1 x t8 wrench.

 

Huot CNC SuperTower for 50 Taper Toolholders - The company, founded in 1926 and headquartered in st. (H is height, the vertical distance from lowest to highest point w is width, the horizontal distance from left to right d is depth, the horizontal distance from front to back. The tower is made of 12-gauge steel with a phosphate undercoating and gold powder coating for durability. The supertower has mounting holes for bolting to the floor. Huot manufactures cutting tool storage systems. The tower is 33. Paul, mn, meets international organization for standardization (iso) standard 9001. The unit can be stacked with other huot supertowers and an optional fourth shelf is sold separately. Organizer types include gauges, indexes (also called cases), dispenser cabinets, carts, towers, racks, and platforms. 75 × 17. The huot cnc supertower for 50 taper toolholders has three shelves with 26 compartments on each shelf to hold a total of 78 cnc 50 taper toolholders and is made in usa. 5 x 33. 5 inches (h x w x d). The shelves are angled for convenient access. )Cutting tool organizers provide storage, organization, and quick size identification for drill bits, taps, and reamers.

 

Kyocera S08M-SVJBR2 Steel Boring Bar 0.62in Minimum Bore Diameter 6in OAL S…SVJB Toolholder Style Right Hand Screw Holding 52 Degrees Lead Angle - Through coolant no, insert holding method screw, rake neutral (axial). This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Ssvjb toolholder style, 12500in maximum bore depth, 05000in shank, right hand. S08m-svjbr2 steel boring bar, 062in minimum bore diameter, 6in overall length. Lead angle 52 degrees, rake angle 0 (axial), multi-use application facing, internal spherical machining.

 

Anytime Tools 3/8″ C6 Carbide Insert for Indexable Lathe Toolholder TCMT110204, 5-Pack - C6 carbide with chip breaker. Features iso spec tcmt 090204 fit our 3/8″ indexable toolholders made of c6 carbide. C6 carbide indexable lathe bit inserts inserts can be rotated to a new cutting edge without changing the position of the tool holder (each has three sides).

 

AccusizeTools – 3/4×4-1/2″ MWLNR-12-4C Toolholder, RH, w/ WMNG432 Carbide Insert, #2316-0008INS1 - Shank square 3/4” overall length 4-1/2”. Insert ic 1/2″ t 3/16″, 10 pcs/box carbide inserts tin coated wnmg432, #2133-1022×10. Finger clamp cl-6, clamp screw xns0520. Model mwlnr-12-4c. Locking pins nl0617, shims w0803b.

 

Huot Angled Platform for 40 Taper Toolholders - (h is height, the vertical distance from lowest to highest point w is width, the horizontal distance from left to right d is depth, the horizontal distance from front to back. Paul, mn, meets international organization for standardization (iso) standard 9001. The platform is 11 x 27 × 20. The company, founded in 1926 and headquartered in st. The huot angled platform for 40 taper toolholders holds 24 cnc 40 taper toolholders and is made in usa. 25 inches (h x w x d). Toolholders are not included. The platform is made of steel with an epoxy finish for durability and protection and has nylon inserts that help protect the tools. Organizer types include gauges, indexes (also called cases), dispenser cabinets, carts, towers, racks, and platforms. )Cutting tool organizers provide storage, organization, and quick size identification for drill bits, taps, and reamers. Huot manufactures cutting tool storage systems. It is angled for visibility and convenient access to stored tools.

 

Dorian Tool D2 Chromium Molybdenum Alloy Steel Quick Change Turning, Facing and Boring Toolholder for SDN35CXA Super Quick Change Tool Post, 3/4″ – 1″ Tool Capacity, 3-3/4″ Width, 1-1/2″ Height - The “v” groove makes this holder more versatile so that it can hold either square shank toolholders or boring bars. Fits industry standard toolposts. Applicable for holds square shank tools, holds boring bars, turning and facing, light to medium boring, threading and grooving, cut-off applications. Holds the tool close to the tool post to maximize rigidity when turning, facing, threading or boring.

 

Huot Angled Platform for Coromant Capto C5 Toolholders - Toolholders are not included. Organizer types include gauges, indexes (also called cases), dispenser cabinets, carts, towers, racks, and platforms. It is angled for visibility and convenient access to stored tools. Paul, mn, meets international organization for standardization (iso) standard 9001. The platform is made of steel with an epoxy finish for durability and protection and has nylon inserts that help protect the tools. The company, founded in 1926 and headquartered in st. 25 inches (h x w x d). (H is height, the vertical distance from lowest to highest point w is width, the horizontal distance from left to right d is depth, the horizontal distance from front to back. )cutting tool organizers provide storage, organization, and quick size identification for drill bits, taps, and reamers. Huot manufactures cutting tool storage systems. The platform is 11 x 27 × 20. The huot angled platform for coromant capto c5 toolholders holds 24 cnc capto c5 toolholders and is made in usa.

 

MCLNL 12-4B LH Toolholder (Note: Picture is RH) - Thru hardened, ion-nitrided, and black oxide coated. High tensile strength chromium molybdenum alloy steel. Quick change mounting. Cnc precision ground and qualified for accuracy and super precise tool change repeatability within 00001″. Applicable for holds square shank tools, turning and facing, threading and grooving, cut-off applications.

 

1-1/4″ X 3/4″ “C” TOOLHOLDER BUSHING – TTC - Designed for universal use on all cnc turning machines. Precision machined hardened and ground concentric.

 

Beta C57P R Panel Toolholder Mastercargo Red - To mould an idea, encourage it to its final outcome and after that better it still, beta works daily, in close contact with end users, researching materials, design and constant improvement. Beta utensili is a leading company in the production and sales of professional hand tools. Scrupulous control on each tool ensures its invariable quality. Accuracy, precision, rigor, quality, courage, style, consistency and innovation. The ciceri family began producing tools in northern italy in the 1880s. Today, family owned beta, or beta utensili is known for its direct involvement in grand prix racing, a relationship that dates back to the early 1970s. Research, development and quality. While nothing is perfect, we’re practicing.

 

Dorian Tool D1 Square Shank Chromium Molybdenum Alloy Steel Quick Change Turning and Facing Toolholder for SDN25AXA Super Quick Change Tool Post, 1/2″ – 3/4″ Tool Capacity, 2-3/4″ Width, 1″ Height - High tensile strength chromium molybdenum alloy steel. Quick change mounting. Applicable for holds square shank tools, turning and facing, threading and grooving, cut-off applications. Thru hardened, ion-nitrided, and black oxide coated. Cnc precision ground and qualified for accuracy and super precise tool change repeatability within 00001″.

 

NMTB40 – ER32 – 4.00 Precision Toolholder - 0002in tir works on all nmtb30 nmtb40 machines all critical tool holder surfaces precision ground made from alloy structural steel hardened to 48, 52rc 8000 rpms collet nut is included coolant thru capability for nmtb30 rear thread for pull stud is 1/2″-13 for nmtb40 rear thread for pull stud is 5/8-11. Collet chuck nmtb-er spacification finish black oxide runout. 005mm/.

 

Kennedy Manufacturing 50102TX Tool Trolley W/60Piece Toolholder Set, , Industrial Tan - Supports up to 1,000 lbs. 0. Two-sided trolley features reinforced, steel panels that will accept kennedy toolholders. Made in the usa.

 

Huot Angled Platform for 50 Taper Toolholders - Toolholders are not included. Huot manufactures cutting tool storage systems. The company, founded in 1926 and headquartered in st. The platform is made of steel with an epoxy finish for durability and protection and has nylon inserts that help protect the tools. It is angled for visibility and convenient access to stored tools. The platform is 11 x 27 × 20. )Cutting tool organizers provide storage, organization, and quick size identification for drill bits, taps, and reamers. (H is height, the vertical distance from lowest to highest point w is width, the horizontal distance from left to right d is depth, the horizontal distance from front to back. Paul, mn, meets international organization for standardization (iso) standard 9001. Organizer types include gauges, indexes (also called cases), dispenser cabinets, carts, towers, racks, and platforms. The huot angled platform for 50 taper toolholders holds 18 cnc 50 taper toolholders and is made in usa. 25 inches (h x w x d).

 

Talon Pegboard Curved Hook Toolholder – 6 Pack - Fit all standard 1/4″ pegboard. Pull tools on and off them all day, or all year long, and they will never come loose hooks are removeable so the can be re-used or re-arranged anytime. You have picked your last pegboard hook off the floor made of unbreakable nylon, talon hooks are the “never fall” pegboard hooks. Just push the screw in with your thumb and the hook holds rock solid. Sold in packs of 6. They have ingenious dual anchor and screw set in the back. Usa. Come in a wide variety of shapes & styles (straight, curved, elbow, screwdriver, pliers) available to fit your needs.

 

Huot ToolScoot Cart for 50 Taper Toolholders - Made in usa. Made of steel with an epoxy finish for durability and protection. Lower tray is angled for access to tools from either side. Interlocking solid side panels and 5″ casters load rated at 1,000 lb for stability and strength. Two-shelf storage cart has compartments for 36 cnc 50 taper toolholders including bt, cat “v” flange, and nmtb.

 

PHASE II #2 Boring, Turning & Facing Holder – Model .: 250-202 SERIES: #2 OVERALL HEIGHT OF TOOLHOLDER: 1-3/4″ Tool Bit 1/4″ – 5/8″ Maximum Boring Bar Diameter: 1/2″ Height To Top Of Tool Bar: 1-1/8″ - Change tools in seconds no time wasted with shims. Increases productivity of all lathe operations. All working parts hardened and ground. Maximum rigidity for chatter-free performance. Completely sealed for maintenance-free operation.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.