Top 22 Best Slotting Cutter Router Bits

 

Magnate 4106 Slotting Cutter Router Bits - 516 Bore - 532 Kerf 3 Wing 516 Bore

Magnate 4106 Slotting Cutter Router Bits – 5/16″ Bore – 5/32″ Kerf; 3 Wing; 5/16″ Bore

Magnate 4106 Slotting Cutter Router Bits – 5/16″ Bore – 5/32″ Kerf; 3 Wing; 5/16″ Bore - It is also equipped with wide open gullets for easy disposal of wood chips. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications. In case a bit doesn’t come with a speed chart. By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. You may try the following suggestion. 4301, 4302, and 4303. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Excessive overall length may cause tool damage. Must be used with arbors with 5/16″ spindle, such as magnate tool no. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is suited for softwoods, hardwoods, chipboard, plywood and etc. 2-wing design is most popular and economically priced.

 

Bosch 85529M 18-Inch Kerf 3 Wing Slotting Cutter Router Bit

Bosch 85529M 1/8-Inch Kerf 3 Wing Slotting Cutter Router Bit

Bosch 85529M 1/8-Inch Kerf 3 Wing Slotting Cutter Router Bit - Dimensions -1/2” depth of cut. -1/8” cutting edge length. Specifications -3 wing. -5/16” shank diameter. -Micrograin bit for making slots for t molding and weather stripping. 85529m features -slotting cutter.

 

Magnate 4004 Slotting Cutter Router Bits - 516 Bore - 18 Kerf 2 Wing 516 Bore

Magnate 4004 Slotting Cutter Router Bits – 5/16″ Bore – 1/8″ Kerf; 2 Wing; 5/16″ Bore

Magnate 4004 Slotting Cutter Router Bits – 5/16″ Bore – 1/8″ Kerf; 2 Wing; 5/16″ Bore - This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications. By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. You may try the following suggestion. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. In case a bit doesn’t come with a speed chart. 4301, 4302, and 4303. It is also equipped with wide open gullets for easy disposal of wood chips. Excessive overall length may cause tool damage. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. 2-wing design is most popular and economically priced. Must be used with arbors with 5/16″ spindle, such as magnate tool no. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is suited for softwoods, hardwoods, chipboard, plywood and etc. 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing.

 

Freud 56-109 Carbide Tipped Three Wing Slotting Cutter Router Bit

Freud 56-109 Carbide Tipped Three Wing Slotting Cutter Router Bit

Freud 56-109 Carbide Tipped Three Wing Slotting Cutter Router Bit - Application cuts all composition materials, plywood, hardwood, and soft wood. Produces a precision slot for t-mouldings, spline joints and many other applications. Compatible with 62-108 bearing. Bodies are heat treated for strength and computer balanced for vibration-free operation. Features freud’s kickback-reducing design for added safety. Should be used with freud’s slotting cutter arbors 60-100 for 1/4″ shanks and 60-102 for 1/2″ shank. Use on hand-held and table-mounted portable routers.

 

Bosch 85505M 14-Inch Kerf 2 Wing Slotting Cutter Router Bit

Bosch 85505M 1/4-Inch Kerf 2 Wing Slotting Cutter Router Bit

Bosch 85505M 1/4-Inch Kerf 2 Wing Slotting Cutter Router Bit - . From the invention of the jigsaw to their ergonomic designed tools, bosch as cared about the customer since they started business in 1886. Be it screwing, hammering, or drilling, bosch has a bit for you. 1/4″ carbide router bit bosch parts keep your tools working their best for any application you can come up with, and bosch bits are the most versatile parts of them all. Features 1/4″ cutting edge length 1-3/16″ diameter bosch has been in the headlines of state of the art development for over 100 years.

 

Magnate 4009 Slotting Cutter Router Bits - 516 Bore - 932 Kerf 2 Wing 516 Bore

Magnate 4009 Slotting Cutter Router Bits – 5/16″ Bore – 9/32″ Kerf; 2 Wing; 5/16″ Bore

Magnate 4009 Slotting Cutter Router Bits – 5/16″ Bore – 9/32″ Kerf; 2 Wing; 5/16″ Bore - 2 flute carbide tipped 9/32″ kerf 2 wing 5/16″ bore 1/2″ cutting depth 1-7/8″ overall diameter. Product name v type slotting cuttercutting diameter(approx) 64mm /1/4”. Package content 1 x v type slotting cutter. Shank diameter 628mm / 1/4”blade length 36cm / 145”. 2 flute carbide tipped 9/32″ kerf 3 wing 5/16″ bore 1/2″ cutting depth 1-7/8″ overall diameter.

 

Magnate 4202 Slotting Cutter Router Bits - 516 Bore - 332 Kerf 4 Wing 516 Bore

Magnate 4202 Slotting Cutter Router Bits – 5/16″ Bore – 3/32″ Kerf; 4 Wing; 5/16″ Bore

Magnate 4202 Slotting Cutter Router Bits – 5/16″ Bore – 3/32″ Kerf; 4 Wing; 5/16″ Bore - You may try the following suggestion. 2-wing design is most popular and economically priced. It is also equipped with wide open gullets for easy disposal of wood chips. In case a bit doesn’t come with a speed chart. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. 4301, 4302, and 4303. By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Must be used with arbors with 5/16″ spindle, such as magnate tool no. 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is suited for softwoods, hardwoods, chipboard, plywood and etc. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications.

 

Magnate 4006 Slotting Cutter Router Bits - 516 Bore - 532 Kerf 2 Wing 516 Bore

Magnate 4006 Slotting Cutter Router Bits – 5/16″ Bore – 5/32″ Kerf; 2 Wing; 5/16″ Bore

Magnate 4006 Slotting Cutter Router Bits – 5/16″ Bore – 5/32″ Kerf; 2 Wing; 5/16″ Bore - The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Excessive overall length may cause tool damage. It is also equipped with wide open gullets for easy disposal of wood chips. You may try the following suggestion. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. 4301, 4302, and 4303. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications. 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing. 2-wing design is most popular and economically priced. By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is suited for softwoods, hardwoods, chipboard, plywood and etc. In case a bit doesn’t come with a speed chart. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Must be used with arbors with 5/16″ spindle, such as magnate tool no. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning.

 

Magnate 4104 Slotting Cutter Router Bits - 516 Bore - 18 Kerf 3 Wing 516 Bore

Magnate 4104 Slotting Cutter Router Bits – 5/16″ Bore – 1/8″ Kerf; 3 Wing; 5/16″ Bore

Magnate 4104 Slotting Cutter Router Bits – 5/16″ Bore – 1/8″ Kerf; 3 Wing; 5/16″ Bore - It is also equipped with wide open gullets for easy disposal of wood chips. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Must be used with arbors with 5/16″ spindle, such as magnate tool no. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is suited for softwoods, hardwoods, chipboard, plywood and etc. 4301, 4302, and 4303. 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. You may try the following suggestion. In case a bit doesn’t come with a speed chart. By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Excessive overall length may cause tool damage. 2-wing design is most popular and economically priced. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications.

 

Bosch 85610MC 14-Inch Kerf 3 Wing Slotting Cutter Router Bit

Bosch 85610MC 1/4-Inch Kerf 3 Wing Slotting Cutter Router Bit

Bosch 85610MC 1/4-Inch Kerf 3 Wing Slotting Cutter Router Bit - Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.

 

Magnate 4007 Slotting Cutter Router Bits - 516 Bore - 316 Kerf 2 Wing 516 Bore

Magnate 4007 Slotting Cutter Router Bits – 5/16″ Bore – 3/16″ Kerf; 2 Wing; 5/16″ Bore

Magnate 4007 Slotting Cutter Router Bits – 5/16″ Bore – 3/16″ Kerf; 2 Wing; 5/16″ Bore - This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. In case a bit doesn’t come with a speed chart. You may try the following suggestion. It is also equipped with wide open gullets for easy disposal of wood chips. By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Must be used with arbors with 5/16″ spindle, such as magnate tool no. 2-wing design is most popular and economically priced. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is suited for softwoods, hardwoods, chipboard, plywood and etc. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications. Excessive overall length may cause tool damage. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing. 4301, 4302, and 4303.

 

Bosch 85528M 332-Inch Kerf 3 Wing Slotting Cutter Router Bit

Bosch 85528M 3/32-Inch Kerf 3 Wing Slotting Cutter Router Bit

Bosch 85528M 3/32-Inch Kerf 3 Wing Slotting Cutter Router Bit - Dimensions -1/2” depth of cut. Specifications -3 wing. -Carded. -3/32” cutting edge length. -5/16” shank diameter. 85528m features -slotting cutter. -Micrograin bit for making slots for t molding and weather stripping.

 

Bosch 85529MC 18-Inch Kerf 3 Wing Slotting Cutter Router Bit

Bosch 85529MC 1/8-Inch Kerf 3 Wing Slotting Cutter Router Bit

Bosch 85529MC 1/8-Inch Kerf 3 Wing Slotting Cutter Router Bit - Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.

 

Magnate 4109 Slotting Cutter Router Bits - 516 Bore - 932 Kerf 3 Wing 516 Bore

Magnate 4109 Slotting Cutter Router Bits – 5/16″ Bore – 9/32″ Kerf; 3 Wing; 5/16″ Bore

Magnate 4109 Slotting Cutter Router Bits – 5/16″ Bore – 9/32″ Kerf; 3 Wing; 5/16″ Bore - Shank diameter 628mm / 1/4”blade length 36cm / 145”. Product name v type slotting cuttercutting diameter(approx) 64mm /1/4”. Color silver tone, rednet weight 23g. 2 flute carbide tipped 9/32″ kerf 3 wing 5/16″ bore 1/2″ cutting depth 1-7/8″ overall diameter. Package content 1 x v type slotting cutter.

 

Magnate 4204 Slotting Cutter Router Bits - 516 Bore - 18 Kerf 4 Wing 516 Bore

Magnate 4204 Slotting Cutter Router Bits – 5/16″ Bore – 1/8″ Kerf; 4 Wing; 5/16″ Bore

Magnate 4204 Slotting Cutter Router Bits – 5/16″ Bore – 1/8″ Kerf; 4 Wing; 5/16″ Bore - You may try the following suggestion. Excessive overall length may cause tool damage. In case a bit doesn’t come with a speed chart. 2-wing design is most popular and economically priced. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Must be used with arbors with 5/16″ spindle, such as magnate tool no. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. 4301, 4302, and 4303. It is also equipped with wide open gullets for easy disposal of wood chips. 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is suited for softwoods, hardwoods, chipboard, plywood and etc.

 

532 Kerf 3-Wing CT Slotting Cutter Router Bit

5/32″ Kerf, 3-Wing C/T Slotting Cutter Router Bit

5/32″ Kerf, 3-Wing C/T Slotting Cutter Router Bit - Product name v type slotting cutter cutting diameter(approx) 127cm / 1/2”. Color silver tone & red net weight 44g. Total length 53cm / 21” material metal. Package content 1 x v type slotting cutter. Shank diameter 127cm / 1/2” blade length 13cm / 051”.

 

Magnate 4205 Slotting Cutter Router Bits - 516 Bore - 14 Kerf 4 Wing 516 Bore

Magnate 4205 Slotting Cutter Router Bits – 5/16″ Bore – 1/4″ Kerf; 4 Wing; 5/16″ Bore

Magnate 4205 Slotting Cutter Router Bits – 5/16″ Bore – 1/4″ Kerf; 4 Wing; 5/16″ Bore - You may try the following suggestion. 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing. By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. It is suited for softwoods, hardwoods, chipboard, plywood and etc. 2-wing design is most popular and economically priced. Must be used with arbors with 5/16″ spindle, such as magnate tool no. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is also equipped with wide open gullets for easy disposal of wood chips. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. 4301, 4302, and 4303. In case a bit doesn’t come with a speed chart.

 

Magnate 4206 Slotting Cutter Router Bits - 516 Bore - 532 Kerf 4 Wing 516 Bore

Magnate 4206 Slotting Cutter Router Bits – 5/16″ Bore – 5/32″ Kerf; 4 Wing; 5/16″ Bore

Magnate 4206 Slotting Cutter Router Bits – 5/16″ Bore – 5/32″ Kerf; 4 Wing; 5/16″ Bore - Must be used with arbors with 5/16″ spindle, such as magnate tool no. 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing. You may try the following suggestion. It is also equipped with wide open gullets for easy disposal of wood chips. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is suited for softwoods, hardwoods, chipboard, plywood and etc. 4301, 4302, and 4303. Excessive overall length may cause tool damage. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. In case a bit doesn’t come with a speed chart. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. 2-wing design is most popular and economically priced.

 

Magnate 4102 Slotting Cutter Router Bits - 516 Bore - 332 Kerf 3 Wing 516 Bore

Magnate 4102 Slotting Cutter Router Bits – 5/16″ Bore – 3/32″ Kerf; 3 Wing; 5/16″ Bore

Magnate 4102 Slotting Cutter Router Bits – 5/16″ Bore – 3/32″ Kerf; 3 Wing; 5/16″ Bore - Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Must be used with arbors with 5/16″ spindle, such as magnate tool no. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. In case a bit doesn’t come with a speed chart. Excessive overall length may cause tool damage. 2-wing design is most popular and economically priced. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. You may try the following suggestion. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. 4301, 4302, and 4303. By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications. It is suited for softwoods, hardwoods, chipboard, plywood and etc. 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing.

 

Magnate 4002 Slotting Cutter Router Bits - 516 Bore - 332 Kerf 2 Wing 516 Bore

Magnate 4002 Slotting Cutter Router Bits – 5/16″ Bore – 3/32″ Kerf; 2 Wing; 5/16″ Bore

Magnate 4002 Slotting Cutter Router Bits – 5/16″ Bore – 3/32″ Kerf; 2 Wing; 5/16″ Bore - 4301, 4302, and 4303. In case a bit doesn’t come with a speed chart. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Excessive overall length may cause tool damage. Must be used with arbors with 5/16″ spindle, such as magnate tool no. You may try the following suggestion. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is suited for softwoods, hardwoods, chipboard, plywood and etc. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. 2-wing design is most popular and economically priced. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications. It is also equipped with wide open gullets for easy disposal of wood chips.

 

Bosch 85609M 316-Inch Kerf 3 Wing Slotting Cutter Router Bit

Bosch 85609M 3/16-Inch Kerf 3 Wing Slotting Cutter Router Bit

Bosch 85609M 3/16-Inch Kerf 3 Wing Slotting Cutter Router Bit - Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.

 

Magnate 4203 Slotting Cutter Router Bits - 516 Bore - 110 Kerf 4 Wing 516 Bore

Magnate 4203 Slotting Cutter Router Bits – 5/16″ Bore – 1/10″ Kerf; 4 Wing; 5/16″ Bore

Magnate 4203 Slotting Cutter Router Bits – 5/16″ Bore – 1/10″ Kerf; 4 Wing; 5/16″ Bore - 4301, 4302, and 4303. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. You may try the following suggestion. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ ove. Excessive overall length may cause tool damage. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. All slotting cutters can be interchangeable and stacked on the same 5/16″ spindle arbor for various applications. 3-wing and 4-wing design is sturdy and is commonly used for slotting plywood and composition boards to make t-moldings, box joints, spline joints and biscuit jointing. By replacing the original bearing, br-06, the cut depth varies as following originalbearing cutting depth matrix br-20 br-21 br-22 br-23 br-25 1/2″ 7/16″ 3/8″ 5/16″ 1/4″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. In case a bit doesn’t come with a speed chart. 2-wing design is most popular and economically priced. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Must be used with arbors with 5/16″ spindle, such as magnate tool no. It is also equipped with wide open gullets for easy disposal of wood chips. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.