Top 21 Shank 1s

 

Drill America MMO12-2FSE-BN Solid Carbide End Mill Polished Finish 2 Flute Ball End 1 Cutting Length 12 Cutting Diameter 3 Length 12 Shank Pack of 1

Drill America MMO1/2-2FSE-BN Solid Carbide End Mill, Polished Finish, 2 Flute, Ball End, 1″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length, 1/2″ Shank (Pack of 1)

Drill America MMO1/2-2FSE-BN Solid Carbide End Mill, Polished Finish, 2 Flute, Ball End, 1″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length, 1/2″ Shank (Pack of 1) - Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Available in polished finish. 2 flute single end ball. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

EnPointâ„¢ High Hardness Aluminum Cutting 2 Flutes Carbide End Mill 18 3175mm Shank 1mm Cutter Dia Metalworking Square Nose CNC Spiral Milling Cutter for Brass Copper Foil IC Substrate

EnPointâ„¢ High Hardness Aluminum Cutting 2 Flutes Carbide End Mill 1/8″ 3.175mm Shank 1mm Cutter Dia Metalworking Square Nose CNC Spiral Milling Cutter for Brass Copper Foil IC Substrate

EnPointâ„¢ High Hardness Aluminum Cutting 2 Flutes Carbide End Mill 1/8″ 3.175mm Shank 1mm Cutter Dia Metalworking Square Nose CNC Spiral Milling Cutter for Brass Copper Foil IC Substrate - Produced from a premium ultra fine solid carbide for maximum tool strength and durability. Mainly for cutting aluminum substrate, full copper foil and other high ductility metal plates and it can also be used for pbga/boc/csp and intergrated circuit substrate molding. Less heat build up 2 flutes also allow for faster feed and speed rates. Sharp cutting edge produces an excellent surface finish and great work efficiency. 2 flutes with large spiral chip groove bring better chip evacuation, preventing from sticking chips.

 

Kodiak Cutting Tools KCT138334 USA Made  Solid Carbide End Mill Extra Long 4 Flute 18 Shank 1 Length of Cut 3 Overall Length 18 Diameter

Kodiak Cutting Tools KCT138334 USA Made Solid Carbide End Mill, Extra Long, 4 Flute, 1/8″ Shank, 1″ Length of Cut, 3″ Overall Length, 1/8″ Diameter

Kodiak Cutting Tools KCT138334 USA Made Solid Carbide End Mill, Extra Long, 4 Flute, 1/8″ Shank, 1″ Length of Cut, 3″ Overall Length, 1/8″ Diameter - 1/8 inch diameter solid carbide end mill, extra long 1/8″ shank 1″ length of cut 3″ overall length 4 flute carbide, extra long. .

 

Freud 04-124 38 Diameter by 1 Double Flute Straight Router Bit with 14 Shank

Freud 04-124 3/8″ Diameter by 1″ Double Flute Straight Router Bit with 1/4″ Shank

Freud 04-124 3/8″ Diameter by 1″ Double Flute Straight Router Bit with 1/4″ Shank - Kickback reducing design. Precision ground for the smoothest cuts. Individually computer balanced. Covered by freud’s limited lifetime warranty.

 

Drill America MMO132-4FSE Solid Carbide End Mill Polished Finish 4 Flute Square End 18 Cutting Length 132 Cutting Diameter 1-12 Length 18 Shank Pack of 1

Drill America MMO1/32-4FSE Solid Carbide End Mill, Polished Finish, 4 Flute, Square End, 1/8″ Cutting Length, 1/32″ Cutting Diameter, 1-1/2″ Length, 1/8″ Shank (Pack of 1)

Drill America MMO1/32-4FSE Solid Carbide End Mill, Polished Finish, 4 Flute, Square End, 1/8″ Cutting Length, 1/32″ Cutting Diameter, 1-1/2″ Length, 1/8″ Shank (Pack of 1) - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. 4 flute single end. Available in polished finish. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

IVY Classic 01125 2564-Inch M2 High Speed Steel Drill Bit 118-Degree Point Reduced Shank 1Card

IVY Classic 01125 25/64-Inch M2 High Speed Steel Drill Bit, 118-Degree Point, Reduced Shank, 1/Card

IVY Classic 01125 25/64-Inch M2 High Speed Steel Drill Bit, 118-Degree Point, Reduced Shank, 1/Card - Jobber length drill bits for steel, wood and plastic, premium swift bore (registered trademark). Hardened and tempered high speed steel. General purpose 118-degree standard point for easy drilling. Diameter 25/64-inch, overall length 5-1/8-inch, shank 3/8-inch reduced shank. Precision ground, bright finish with polished flutes that increase chip ejection.

 

EnPointâ„¢ TiAlN Coating Aluminum Steel Cutting Ultra-fine Submicron Carbide 2-Flute Ballnose End Mill 532 4mm Shank 1mm Cut Dia 2mm Flute Length Round Bottom CNC Milling Machine Tool for Cast Iron Carbon Steel Tool Steel

EnPointâ„¢ TiAlN Coating Aluminum Steel Cutting Ultra-fine Submicron Carbide 2-Flute Ballnose End Mill 5/32″ 4mm Shank 1mm Cut Dia 2mm Flute Length Round Bottom CNC Milling Machine Tool for Cast Iron Carbon Steel Tool Steel

EnPointâ„¢ TiAlN Coating Aluminum Steel Cutting Ultra-fine Submicron Carbide 2-Flute Ballnose End Mill 5/32″ 4mm Shank 1mm Cut Dia 2mm Flute Length Round Bottom CNC Milling Machine Tool for Cast Iron Carbon Steel Tool Steel - 2 flutes allows higher feedrates and provides great chip clearance to prevent chips from sticking. Ballnose for producing round bottomed grooves in hardwood and softwood, plywood & composites. Produced from ultra-fine submicron nano grade solid carbide for maximum tool strength and durablity. Used to add a radius between perpendicular faces to reduce stress concentrations. With tialn coating increases cutting speed and tool life as well as improving the surface finish.

 

CMT 80609511 Flush Trim bit 14-Inch Shank 1-Inch Cutting Length Carbide-Tipped

CMT 806.095.11 Flush Trim bit, 1/4-Inch Shank, 1-Inch Cutting Length, Carbide-Tipped

CMT 806.095.11 Flush Trim bit, 1/4-Inch Shank, 1-Inch Cutting Length, Carbide-Tipped - 3/8-inch cutting diameter, 2-11/16-inch length, bearing included. 2 sinterhip hi-density industrial chrome carbide cutting edges. Cmt bits were rated the best overall in comparison to other brand (test by wood magazine). For cutting hardwood/softwood, laminates use on router tables only, not for hand-held routers. Super-strength superior steel, non-stick orange shield coating.

 

Drill America DWTPT Series Qualtech Carbon Steel Pipe Tap Uncoated Bright Finish Round with Square End Shank 1-11-12 NPT Pack of 1

Drill America DWTPT Series Qualtech Carbon Steel Pipe Tap, Uncoated (Bright) Finish, Round with Square End Shank, 1″-11-1/2 NPT (Pack of 1)

Drill America DWTPT Series Qualtech Carbon Steel Pipe Tap, Uncoated (Bright) Finish, Round with Square End Shank, 1″-11-1/2 NPT (Pack of 1) - Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shank with square end. Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.

 

Kodiak Cutting Tools KODIAK136321 USA Made Solid Carbide End Mill Coated 2 Flute 14 Shank 1 Length of Cut 4 Overall Length 14 Diameter

Kodiak Cutting Tools KODIAK136321 USA Made Solid Carbide End Mill, Coated, 2 Flute, 1/4″ Shank, 1″ Length of Cut, 4″ Overall Length, 1/4″ Diameter

Kodiak Cutting Tools KODIAK136321 USA Made Solid Carbide End Mill, Coated, 2 Flute, 1/4″ Shank, 1″ Length of Cut, 4″ Overall Length, 1/4″ Diameter - 1/4 inch diameter solid carbide end mill, coated 1/4″ shank 1″ length of cut 4″ overall length 2 flute carbide, coated. .

 

uxcell 14-Inch Shank 1-Inch Cutting Dia Double Flute Carbide Tipped Cleaning Bottom Router Bit

uxcell 1/4-Inch Shank 1-Inch Cutting Dia Double Flute Carbide Tipped Cleaning Bottom Router Bit

uxcell 1/4-Inch Shank 1-Inch Cutting Dia Double Flute Carbide Tipped Cleaning Bottom Router Bit - This carbide-tipped bit use a two-flute bit where fine finish is paramount and two flutes coulld balance the bit, eliminating vibration that degrades the cut finish. Use on cnc and other automatic routers as well as hand held and table mounted portable routers. Cleaning bottom bit for industrial purpose is characterized with high hardness and long life, and resulting in nice finishing on woody pieces after cutting. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Mainly used for cutting and smoothing a variety of materials from wood, plywood, mdf and other wood composites, plastics, fiberglass, and solid surface etc.

 

Neiko Pro 10238B Silver and Deming Industrial Drill Bit with 12 Shank 1

Neiko Pro 10238B Silver and Deming Industrial Drill Bit with 1/2″ Shank, 1″

Neiko Pro 10238B Silver and Deming Industrial Drill Bit with 1/2″ Shank, 1″ - Perfect to use with hand and power tools for various projects. Powerful magnets hold fasteners for optimum driving. Magnetic nutsetter 5/16 x 2-9/16-inch, 5 pieces.

 

Drill America MMO316-4FSE-BN Solid Carbide End Mill Polished Finish 4 Flute Ball End 58 Cutting Length 316 Cutting Diameter 2 Length 316 Shank Pack of 1

Drill America MMO3/16-4FSE-BN Solid Carbide End Mill, Polished Finish, 4 Flute, Ball End, 5/8″ Cutting Length, 3/16″ Cutting Diameter, 2″ Length, 3/16″ Shank (Pack of 1)

Drill America MMO3/16-4FSE-BN Solid Carbide End Mill, Polished Finish, 4 Flute, Ball End, 5/8″ Cutting Length, 3/16″ Cutting Diameter, 2″ Length, 3/16″ Shank (Pack of 1) - 4 flute single end ball. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Available in polished finish. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems.

 

Drill America MMO116-4FSE-BN Solid Carbide End Mill Polished Finish 4 Flute Ball End 14 Cutting Length 116 Cutting Diameter 1-12 Length 18 Shank Pack of 1

Drill America MMO1/16-4FSE-BN Solid Carbide End Mill, Polished Finish, 4 Flute, Ball End, 1/4″ Cutting Length, 1/16″ Cutting Diameter, 1-1/2″ Length, 1/8″ Shank (Pack of 1)

Drill America MMO1/16-4FSE-BN Solid Carbide End Mill, Polished Finish, 4 Flute, Ball End, 1/4″ Cutting Length, 1/16″ Cutting Diameter, 1-1/2″ Length, 1/8″ Shank (Pack of 1) - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 4 flute single end ball. Available in polished finish. Round shanks allow use with a wide variety of toolholding systems.

 

Drill America DWCF Series High-Speed Steel End Mill Polished Finish 4 Flute Square End 1-38 Cutting Length 58 Cutting Diameter 3-38 Length 12 Shank Pack of 1

Drill America DWCF Series High-Speed Steel End Mill, Polished Finish, 4 Flute, Square End, 1-3/8″ Cutting Length, 5/8″ Cutting Diameter, 3-3/8″ Length, 1/2″ Shank (Pack of 1)

Drill America DWCF Series High-Speed Steel End Mill, Polished Finish, 4 Flute, Square End, 1-3/8″ Cutting Length, 5/8″ Cutting Diameter, 3-3/8″ Length, 1/2″ Shank (Pack of 1) - Designed to machine most materials of medium hardness such as steel, brass, bronze and iron. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. Available in polished finish.

 

Forney 72738 Wire End Brush Fine Crimped with 14-Inch Hex Shank 1-Inch-by-008-Inch

Forney 72738 Wire End Brush, Fine Crimped with 1/4-Inch Hex Shank, 1-Inch-by-.008-Inch

Forney 72738 Wire End Brush, Fine Crimped with 1/4-Inch Hex Shank, 1-Inch-by-.008-Inch - 1/4-inch (635-mm) hex shank. Manufactured in china. Crimped style for light to medium duty applications. Crimped wire end brush, fine, 1/4hex shank,. Removes rust, scale and paint in hard to reach areas. Designed for easy access into narrow holes and confined areas. Works with any power drill or pneumatic air drill. Adds extra shine to your product.

 

Freud 12-136 58-Inch Diameter by 1-Inch Double Flute Straight Router Bit with 12-Inch Shank

Freud 12-136 5/8-Inch Diameter by 1-Inch Double Flute Straight Router Bit with 1/2-Inch Shank

Freud 12-136 5/8-Inch Diameter by 1-Inch Double Flute Straight Router Bit with 1/2-Inch Shank - The product is 5/8″ diameter, 2 flute carbide straight router bit, 1/2″ shank, 1″ cutting length, 2-7/8″ total length. Precision ground for the smoothest cuts. Individually computer balanced. The product is manufactured in china. Easy to use. Covered by freud’s limited lifetime warranty. Kickback reducing design.

 

Drill America MMO18-4FSE-BN Solid Carbide End Mill Polished Finish 4 Flute Ball End 12 Cutting Length 18 Cutting Diameter 1-12 Length 18 Shank Pack of 1

Drill America MMO1/8-4FSE-BN Solid Carbide End Mill, Polished Finish, 4 Flute, Ball End, 1/2″ Cutting Length, 1/8″ Cutting Diameter, 1-1/2″ Length, 1/8″ Shank (Pack of 1)

Drill America MMO1/8-4FSE-BN Solid Carbide End Mill, Polished Finish, 4 Flute, Ball End, 1/2″ Cutting Length, 1/8″ Cutting Diameter, 1-1/2″ Length, 1/8″ Shank (Pack of 1) - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Available in polished finish. Round shanks allow use with a wide variety of toolholding systems. 4 flute single end ball.

 

Kodiak Cutting Tools KCT166582 USA Made Solid Carbide End Mill AlTiN Coated 4 Flute 38 Diameter 38 Shank 1 Length of Cut 2-12 Overall Length

Kodiak Cutting Tools KCT166582 USA Made Solid Carbide End Mill, AlTiN Coated, 4 Flute, 3/8″ Diameter, 3/8″ Shank, 1″ Length of Cut, 2-1/2″ Overall Length

Kodiak Cutting Tools KCT166582 USA Made Solid Carbide End Mill, AlTiN Coated, 4 Flute, 3/8″ Diameter, 3/8″ Shank, 1″ Length of Cut, 2-1/2″ Overall Length - . 3/8 inch diameter solid carbide end mill, altin coated 3/8″ shank 1″ length of cut 2-1/2″ overall length 4 flute carbide, coated.

 

ZJchao 10 pieces Tungsten Carbide Rotary Burr SET 18 shank Misc

ZJchao 10 pieces Tungsten Carbide Rotary Burr SET 1/8″ shank [Misc.]

ZJchao 10 pieces Tungsten Carbide Rotary Burr SET 1/8″ shank [Misc.] - They are in different shape likes sphere, cylinder or long nose, etc. Can be used with most hand power tools, including dremel, proxxon, and many others. Assorted 10 pieces of tungsten carbide burr. 000 1/min shank diameter 3 mm. They are suitable for polishing metals and plastics. 1/8″(3mm) shank, 1- 3/4″(45mm) total length, 1/4″ (6mm) head size. Come with pvc case 4-pc. Technical data working diameter 20mm material cotton, felt, leather, nylon maximum speed 28. Set consists of a cotton, felt, leather and nylon polishing wheel. . Set textile buffing wheels for dremel the 4-pc. Produced by excellent quality material.

 

Drill America DMS Series High-Speed Steel Hex Shank Arbor for 1-14-6 Hole Saws 716 Shank Pack of 1

Drill America DMS Series High-Speed Steel Hex Shank Arbor for 1-1/4″-6 Hole Saws, 7/16″ Shank (Pack of 1)

Drill America DMS Series High-Speed Steel Hex Shank Arbor for 1-1/4″-6 Hole Saws, 7/16″ Shank (Pack of 1) - Drill america dms series hex shank arbor for use with 1-1/4″-6 hole saws. 7/16-inches shank diameter. . High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.