Top 19 Threading Tools

 

uxcell SVVCN1212H11 12mmx12mm Shank CNC Lathe Internal Threading Tool Holder

uxcell SVVCN1212H11 12mmx12mm Shank CNC Lathe Internal Threading Tool Holder

uxcell SVVCN1212H11 12mmx12mm Shank CNC Lathe Internal Threading Tool Holder - . Used on turning lathe machine. Good toughness and hardness, show a perfect machining effect. It can reduce the tool grinding cost and improve the cutting efficiency. Enhance the surface gloss of the cutting pieces. T8 wrench included, threading cabide insert is not included. Applying for turning, copy turning and facing, is suitable for cutting fluid.

 

27mm White Blind Cord 100 Feet Plus Threading Tool

2.7mm White Blind Cord (100 Feet) Plus Threading Tool

2.7mm White Blind Cord (100 Feet) Plus Threading Tool - To reduce the chance of a return, please check how to measure the cord. High quality replacement cord made of polyester fiber for high tensile strength. And this should measure 1/2″ when using a unworn cord this is not exact but just a helpful tool. With a number 2 pencil wrap the cord around 4 times push the cord together tight. Made in the usa same cord many major brands use.

 

Micro 100 ITL-4901500 Left Hand 60° Internal Single Point Threading Tool 0490 Minimum Minor Diameter 0120 Projection 1500 Maximum Bore Depth 0069 Offset Point 8 to 24 Threads per Inch 05000 Shank Diameter 3 Overall Length Solid Carbide

Micro 100 ITL-4901500 Left Hand 60° Internal Single Point Threading Tool, 0.490″ Minimum Minor Diameter, 0.120″ Projection, 1.500″ Maximum Bore Depth, 0.069″ Offset Point, 8 to 24 Threads per Inch, 0.5000″ Shank Diameter, 3″ Overall Length, Solid Carbide

Micro 100 ITL-4901500 Left Hand 60° Internal Single Point Threading Tool, 0.490″ Minimum Minor Diameter, 0.120″ Projection, 1.500″ Maximum Bore Depth, 0.069″ Offset Point, 8 to 24 Threads per Inch, 0.5000″ Shank Diameter, 3″ Overall Length, Solid Carbide - Ideal for threading in small diameters. Each tool’s cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. . Designed and engineered with a single point that produces a thread on a cone or cylinder. The micro 100 itl-4901500 left hand, uncoated, solid carbidesingle point internal threading tool. For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. Widely used in cnc lathes and engine type lathes because the single point process tracks the spindle and tool position. Chips are removed from the work piece with each pass of the tool as it linearly moves across the part. Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates.

 

Irwin Tools 1835091 Performance Threading System Tap and Die Set -Machine ScrewFractional 40-Piece

Irwin Tools 1835091 Performance Threading System Tap and Die Set -Machine Screw/Fractional, 40-Piece

Irwin Tools 1835091 Performance Threading System Tap and Die Set -Machine Screw/Fractional, 40-Piece - Die lock ergonomic die handle that also accepts two different adjustable tap sockets. This product is manufactured in usa. Contains sae plug taps and dies with drive tool system. All taps and dies are constructed of high carbon steel. Laser etched markings for easy identification. This is easy to install and easy to use. This product is made of high quality material.

 

Micro 100 ITL-100600 Left Hand 60° Internal Single Point Threading Tool 0100 Minimum Minor Diameter 0025 Projection 0600 Maximum Bore Depth 0014 Offset Point 32 to 64 Threads per Inch 0125 Shank Diameter 15 Overall Length Solid Carbid

Micro 100 ITL-100600 Left Hand 60° Internal Single Point Threading Tool, 0.100″ Minimum Minor Diameter, 0.025″ Projection, 0.600″ Maximum Bore Depth, 0.014″ Offset Point, 32 to 64 Threads per Inch, 0.125″ Shank Diameter, 1.5″ Overall Length, Solid Carbid

Micro 100 ITL-100600 Left Hand 60° Internal Single Point Threading Tool, 0.100″ Minimum Minor Diameter, 0.025″ Projection, 0.600″ Maximum Bore Depth, 0.014″ Offset Point, 32 to 64 Threads per Inch, 0.125″ Shank Diameter, 1.5″ Overall Length, Solid Carbid - Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates. For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling. Chips are removed from the work piece with each pass of the tool as it linearly moves across the part. Widely used in cnc lathes and engine type lathes because the single point process tracks the spindle and tool position. Each tool’s cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. Designed and engineered with a single point that produces a thread on a cone or cylinder. Ideal for threading in small diameters. The micro 100 itl-100600 left hand, uncoated, solid carbidesingle point internal threading tool.

 

20x Silverline M8x 125mm Thread Repair Kit Engineering Threading Tools

20x Silverline M8x 1.25mm Thread Repair Kit Engineering Threading Tools

20x Silverline M8x 1.25mm Thread Repair Kit Engineering Threading Tools - Hexagon rethreading die is precision high carbon steel die. M8 x 125mm. Dies is same size as standard hex nuts. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Not intended for producing new threads on unthreaded bar, bolts, or pipes.

 

Micro 100 IAT-1500-6 Internal ACME 29° Angle Threading Tool 0400 Minimum Bore Diameter 0120 Projection 1500 Maximum Bore Diameter 0057 Flat 6 Threads per Inch 05000 Shank Diameter 3 Overall Length Solid Carbide Tool

Micro 100 IAT-1500-6 Internal ACME 29° Angle Threading Tool, 0.400″ Minimum Bore Diameter, 0.120″ Projection, 1.500″ Maximum Bore Diameter, 0.057″ Flat, 6 Threads per Inch, 0.5000 Shank Diameter, 3″ Overall Length, Solid Carbide Tool

Micro 100 IAT-1500-6 Internal ACME 29° Angle Threading Tool, 0.400″ Minimum Bore Diameter, 0.120″ Projection, 1.500″ Maximum Bore Diameter, 0.057″ Flat, 6 Threads per Inch, 0.5000 Shank Diameter, 3″ Overall Length, Solid Carbide Tool - Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates. Designed and engineered for acme profiles in internal threading applications. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. The micro 100 iat-1500-6 uncoated solid carbide, internal acme internal threading tool. . For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling. Each tool’s cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes.

 

18mm Medium Walnut Blind Cord 100 Feet Plus Threading Tool

1.8mm Medium Walnut Blind Cord (100 Feet) Plus Threading Tool

1.8mm Medium Walnut Blind Cord (100 Feet) Plus Threading Tool - To reduce the chance of a return, please check how to measure the cord. And this should measure 1/2″ when using a unworn cord this is not exact but just a helpful tool. With a number 2 pencil wrap the cord around 7 times push the cord together tight. Made in the usa same cord many major brands use. High quality replacement cord made of polyester fiber for high tensile strength.

 

Micro 100 ITL-120400 Left Hand 60° Internal Single Point Threading Tool 0120 Minimum Minor Diameter 0030 Projection 0400 Maximum Bore Depth 0017 Offset Point 24 to 56 Threads per Inch 01875 Shank Diameter 2 Overall Length Solid Carbide

Micro 100 ITL-120400 Left Hand 60° Internal Single Point Threading Tool, 0.120″ Minimum Minor Diameter, 0.030″ Projection, 0.400″ Maximum Bore Depth, 0.017″ Offset Point, 24 to 56 Threads per Inch, 0.1875″ Shank Diameter, 2″ Overall Length, Solid Carbide

Micro 100 ITL-120400 Left Hand 60° Internal Single Point Threading Tool, 0.120″ Minimum Minor Diameter, 0.030″ Projection, 0.400″ Maximum Bore Depth, 0.017″ Offset Point, 24 to 56 Threads per Inch, 0.1875″ Shank Diameter, 2″ Overall Length, Solid Carbide - Ideal for threading in small diameters. Chips are removed from the work piece with each pass of the tool as it linearly moves across the part. . For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. Each tool’s cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. Widely used in cnc lathes and engine type lathes because the single point process tracks the spindle and tool position. Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates. The micro 100 itl-120400 left hand, uncoated, solid carbidesingle point internal threading tool. Designed and engineered with a single point that produces a thread on a cone or cylinder.

 

Uxcell a15111200ux1158 S16Q-SDXCR11 CNC Lathe Internal Threading Tool Holder Right Hand

Uxcell a15111200ux1158 S16Q-SDXCR11 CNC Lathe Internal Threading Tool Holder Right Hand

Uxcell a15111200ux1158 S16Q-SDXCR11 CNC Lathe Internal Threading Tool Holder Right Hand - It can reduce the tool grinding cost and improve the cutting efficiency. Used on turning lathe machine. High precision. Applying for turning, copy turning and facing, is suitable for cutting fluid. Round shank, carbide insert, wrench included. And the holder is clamping, the insert fits for cutting. Good toughness and hardness, show a perfect machining effect. Enhance the surface gloss of the cutting pieces. Firm clamping. The tool is composed by two parts holder and carbide insert.

 

uxcell T Type Ratchet Tap Wrench 3mm to 8mm Tapping Threading Tools

uxcell T Type Ratchet Tap Wrench 3mm to 8mm Tapping Threading Tools

uxcell T Type Ratchet Tap Wrench 3mm to 8mm Tapping Threading Tools - Use the small knurled knob on the top of this ratchet tap wrench for starting the tap or backing out. A switch on the shaft allows you three settings. The t handle ratchet tap wrench has a ratchet arrangement which is perfect for tapping holes in tight confined spaces or just because it&#39s easier. Friction holds the crossbar handle in the most convenient position. Forward, reverse and lock positions.

 

Uxcell a15111200ux1119 S08K-SCLCL06 CNC Lathe Internal Threading Turning Tool Holder with Wrench

Uxcell a15111200ux1119 S08K-SCLCL06 CNC Lathe Internal Threading Turning Tool Holder with Wrench

Uxcell a15111200ux1119 S08K-SCLCL06 CNC Lathe Internal Threading Turning Tool Holder with Wrench - . Good toughness and hardness, show a perfect machining effect. Enhance the surface gloss of the cutting pieces. Applying for turning, copy turning and facing, is suitable for cutting fluid. Wrench included, threading carbide insert is not included. It can reduce the tool grinding cost and improve the cutting efficiency. Used on turning lathe machine.

 

Uxcell a15111200ux1283 S12M-SCLCL09 CNC Lathe Internal Threading Tool Holder

Uxcell a15111200ux1283 S12M-SCLCL09 CNC Lathe Internal Threading Tool Holder

Uxcell a15111200ux1283 S12M-SCLCL09 CNC Lathe Internal Threading Tool Holder - T15 wrench included, threading carbide insert is not included. It can reduce the tool grinding cost and improve the cutting efficiency. . Enhance the surface gloss of the cutting pieces. Good toughness and hardness, show a perfect machining effect. Used on turning lathe machine. Applying for turning, copy turning and facing, is suitable for cutting fluid.

 

27mm Oak Blind Cord 100 Feet Plus Threading Tool

2.7mm Oak Blind Cord (100 Feet) Plus Threading Tool

2.7mm Oak Blind Cord (100 Feet) Plus Threading Tool - Made in the usa same cord many major brands use. High quality replacement cord made of polyester fiber for high tensile strength. And this should measure 1/2″ when using a unworn cord this is not exact but just a helpful tool. To reduce the chance of a return, please check how to measure the cord. With a number 2 pencil wrap the cord around 4 times push the cord together tight.

 

Micro 100 QIT-360500X Quick Change Internal Single Point Threading Tool Solid Carbide Tool AlTiN Coated 0360 914 mm Minimum Bore Diameter 0085 216 mm Projection 0500 127 mm Maximum Bore Depth 0049 124 mm Offset Point 10 to 32 Th

Micro 100 QIT-360500X Quick Change Internal Single Point Threading Tool, Solid Carbide Tool, AlTiN Coated, 0.360″ (9.14 mm) Minimum Bore Diameter, 0.085″ (2.16 mm) Projection, 0.500″ (12.7 mm) Maximum Bore Depth, 0.049″ (1.24 mm) Offset Point, 10 to 32 Th

Micro 100 QIT-360500X Quick Change Internal Single Point Threading Tool, Solid Carbide Tool, AlTiN Coated, 0.360″ (9.14 mm) Minimum Bore Diameter, 0.085″ (2.16 mm) Projection, 0.500″ (12.7 mm) Maximum Bore Depth, 0.049″ (1.24 mm) Offset Point, 10 to 32 Th - Ideal for small diameter i. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. Designed and engineered with a single point that produces a thread on a cone or cylinder. The micro-quik tooling system provides maximum centerline repeatability within plus or minus 0. Widely used in cnc lathes and engine type lathes because the single point process tracks the spindle and tool position. Threading. 0005″ from tool to tool. Altin coatings are best suited for alloy steels, stainless steels, tool steels, nickel alloys and titanium. The micro 100 qit-360500x altin, aluminum titanium nitride coated, solid carbide, single point threading tool for utilization in the micro-quik change tooling system. D. For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling. Has a higher breakdown temperature while maintaining high surface hardness at elevated temperatures. Altin coatings are high performance and versatile. This type of coating also promotes tool life and allows for faster feeds and speeds. Applicable with oxidation temperatures up to 800° c or 1450° f. . Excellent for dry machining applications. Their substrate is in class of its own resulting from exclusive treating processes that allow increased speed and feed rates. When all of this systems components are used together, this unique system reduces machine setup, downtime, tooling costs, and tooling inventories all while boosting productivity. Manufactured with close tolerances to ensure ultimate precision and performance.

 

Micro 100 ITL-120250 Left Hand 60° Internal Single Point Threading Tool 0120 Minimum Minor Diameter 0030 Projection 0250 Maximum Bore Depth 0017 Offset Point 24 to 56 Threads per Inch 01875 Shank Diameter 2 Overall Length Solid Carbide

Micro 100 ITL-120250 Left Hand 60° Internal Single Point Threading Tool, 0.120″ Minimum Minor Diameter, 0.030″ Projection, 0.250″ Maximum Bore Depth, 0.017″ Offset Point, 24 to 56 Threads per Inch, 0.1875″ Shank Diameter, 2″ Overall Length, Solid Carbide

Micro 100 ITL-120250 Left Hand 60° Internal Single Point Threading Tool, 0.120″ Minimum Minor Diameter, 0.030″ Projection, 0.250″ Maximum Bore Depth, 0.017″ Offset Point, 24 to 56 Threads per Inch, 0.1875″ Shank Diameter, 2″ Overall Length, Solid Carbide - Designed and engineered with a single point that produces a thread on a cone or cylinder. Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates. Each tool’s cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. The micro 100 itl-120250 left hand, uncoated, solid carbidesingle point internal threading tool. Chips are removed from the work piece with each pass of the tool as it linearly moves across the part. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. Ideal for threading in small diameters. Widely used in cnc lathes and engine type lathes because the single point process tracks the spindle and tool position. For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling.

 

Lighthouse quality tools - M14X1 LH Adjustable round threading Die

Lighthouse quality tools – M14X1 LH Adjustable round threading Die

Lighthouse quality tools – M14X1 LH Adjustable round threading Die - Meets american national standards institute or ansi standard. Threading die. Adjustable. High quality steel. Recommended barrel od sizes for threading is 05431 min and 05501 max.

 

Micro 100 QIT-120500 Quick Change Internal Single Point Threading Tool Solid Carbide Tool 0120 305 mm Minimum Bore Diameter 0030 076 mm Projection 0500 127 mm Maximum Bore Depth 0017 0043 mm Offset Point 24 to 56 Threads per Inch

Micro 100 QIT-120500 Quick Change Internal Single Point Threading Tool, Solid Carbide Tool, 0.120″ (3.05 mm) Minimum Bore Diameter, 0.030″ (0.76 mm) Projection, 0.500″ (12.7 mm) Maximum Bore Depth, 0.017″ (0.043 mm) Offset Point, 24 to 56 Threads per Inch

Micro 100 QIT-120500 Quick Change Internal Single Point Threading Tool, Solid Carbide Tool, 0.120″ (3.05 mm) Minimum Bore Diameter, 0.030″ (0.76 mm) Projection, 0.500″ (12.7 mm) Maximum Bore Depth, 0.017″ (0.043 mm) Offset Point, 24 to 56 Threads per Inch - For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling. Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates. Each tool’s cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. Designed and engineered with a single point that produces a thread on a cone or cylinder. Widely used in cnc lathes and engine type lathes because the single point process tracks the spindle and tool position. Threading. D. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. When all of the components are used together, this unique system reduces machine setup, downtime, tooling costs, and tooling inventories all while boosting productivity. The micro 100 qit-120500 uncoated, solid carbide, single point internal threading tool for utilization in the micro-quik change tooling system. Ideal for small diameter i. Manufactured with close tolerances to ensure ultimate precision and performance. The micro-quik tooling system provides maximum centerline repeatability within plus or minus 0. 0005″ from tool to tool.

 

Irwin Tools 1841346 Performance Threading System Self-Aligning Tap and Die Set -Machine ScrewFractional 40-Piece

Irwin Tools 1841346 Performance Threading System Self-Aligning Tap and Die Set -Machine Screw/Fractional, 40-Piece

Irwin Tools 1841346 Performance Threading System Self-Aligning Tap and Die Set -Machine Screw/Fractional, 40-Piece - With a die lock ergonomic die handle that also accepts two different adjustable tap sockets, this all encompassing drive tool set will make the job easier for every threading application. 4 (3mm) to 1/4″ (6mm) tap driver – medium adj tap socket drives taps sizes 1/4″ (3mm) to 1/2″ (12mm) die stock drives 1″ hex dies with and without alignment, accepts sm & medium adj tap sockets metric pitch gauge sae pitch gauge die spacer bulk, hex, irwin t-bar for adj. Kit 16 standard taps 17 standard dies 7 piece drive tool kit threading tools tap driver – small adj tap socket drives taps sizes no. Irwin has also added self aligning taps to the program by creating an alignment chamfer (tap tip) that easily allows the user to start threading straight with ease. The irwin tools, hanson pts (performance threading system) taps and dies are the most innovative products in the threading industry in decades. . The new rolled thread dies with irwin’s patent pending self aligning guide system provided less chance for cross threading, greater thread quality, greater accuracy and greater cutting ease. With an increased flute taper in the taps, the new products are 20% more durable and up to 30% easier to break chips with. On top of the new taps and dies, irwin has also redesigned the entire drive tool system. Tap socket.