Top 19 Hand Flutes

 

KEO 35628 Cobalt Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 120 Degree Point Angle 14mm Body Diameter 115mm Overall Length

KEO 35628 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 14mm Body Diameter, 115mm Overall Length

KEO 35628 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 14mm Body Diameter, 115mm Overall Length - Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

KEO 34380 Solid Carbide NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 90 Degree Point Angle 38 Body Diameter 2-12 Overall Length

KEO 34380 Solid Carbide NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 3/8″ Body Diameter, 2-1/2″ Overall Length

KEO 34380 Solid Carbide NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 3/8″ Body Diameter, 2-1/2″ Overall Length - Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Chicago Latrobe 150L Left-Hand Reverse Flute High-Speed Steel Jobber Length Drill Bit Set Uncoated 118 Degree Conventional Point 15-Piece

Chicago Latrobe 150L Left-Hand (Reverse) Flute High-Speed Steel Jobber Length Drill Bit Set, Uncoated, 118 Degree Conventional Point, 15-Piece

Chicago Latrobe 150L Left-Hand (Reverse) Flute High-Speed Steel Jobber Length Drill Bit Set, Uncoated, 118 Degree Conventional Point, 15-Piece - 118-degree conventional point for a range of drilling applications. Set of 15 jobber length drill bits includes inch sizes 1/16″ through 1/2″ in 1/32″ increments. Uncoated (bright) finish is an untreated surface that can be used on a range of materials, especially soft metals. High-speed steel (hss) provides hardness for wear resistance. Left-hand helix for counterclockwise drilling and broken screw removal.

 

KEO 33383 Cobalt Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 120 Degree Point Angle 38 Body Diameter 3-18 Overall Length

KEO 33383 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 3/8″ Body Diameter, 3-1/8″ Overall Length

KEO 33383 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 3/8″ Body Diameter, 3-1/8″ Overall Length - Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Round shanks allow use with a wide variety of toolholding systems. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

KEO 33147 Cobalt Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 120 Degree Point Angle 14 Body Diameter 6 Overall Length

KEO 33147 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1/4″ Body Diameter, 6″ Overall Length

KEO 33147 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1/4″ Body Diameter, 6″ Overall Length - Round shanks allow use with a wide variety of toolholding systems. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

KEO 34180 Solid Carbide High Performance NC Spotting Drill Bit TiN Coated Round Shank Right Hand Flute 90 Degree Point Angle 18 Body Diameter 1-12 Overall Length

KEO 34180 Solid Carbide High Performance NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 90 Degree Point Angle, 1/8″ Body Diameter, 1-1/2″ Overall Length

KEO 34180 Solid Carbide High Performance NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 90 Degree Point Angle, 1/8″ Body Diameter, 1-1/2″ Overall Length - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. Round shanks allow use with a wide variety of toolholding systems. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.

 

KEO 34144 Solid Carbide High Performance NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 142 Degree Point Angle 14 Body Diameter 2-12 Overall Length

KEO 34144 Solid Carbide High Performance NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 142 Degree Point Angle, 1/4″ Body Diameter, 2-1/2″ Overall Length

KEO 34144 Solid Carbide High Performance NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 142 Degree Point Angle, 1/4″ Body Diameter, 2-1/2″ Overall Length - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.

 

KEO 32100 High-Speed Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 90 Degree Point Angle 1 Body Diameter 6 Overall Length

KEO 32100 High-Speed Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 1″ Body Diameter, 6″ Overall Length

KEO 32100 High-Speed Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 1″ Body Diameter, 6″ Overall Length - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems.

 

KEO 34187 Solid Carbide High Performance NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 90 Degree Point Angle 316 Body Diameter 2 Overall Length

KEO 34187 Solid Carbide High Performance NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 3/16″ Body Diameter, 2″ Overall Length

KEO 34187 Solid Carbide High Performance NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 90 Degree Point Angle, 3/16″ Body Diameter, 2″ Overall Length - Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

Chicago Latrobe 157L High-Speed Steel Short Length Drill Bit Uncoated Bright Round Shank Left Hand Flute 118 Degree Conventional Point Wire Size 11 Pack of 12

Chicago Latrobe 157L High-Speed Steel Short Length Drill Bit, Uncoated (Bright), Round Shank, Left Hand Flute, 118 Degree Conventional Point, Wire Size #11 (Pack of 12)

Chicago Latrobe 157L High-Speed Steel Short Length Drill Bit, Uncoated (Bright), Round Shank, Left Hand Flute, 118 Degree Conventional Point, Wire Size #11 (Pack of 12) - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Shorter flute and overall length provide superior rigidity to minimize deflection when using heavy feed rates. Left-hand helix drills can substitute for screw extractors. Manufactured from premium high-speed steel, 118 degree point. Left-hand helix geometry for drilling in a wide range of operating conditions and materials where the machine spindle rotates counter-clockwise.

 

KEO 33580 High-Speed Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 120 Degree Point Angle 58 Body Diameter 4-38 Overall Length

KEO 33580 High-Speed Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 5/8″ Body Diameter, 4-3/8″ Overall Length

KEO 33580 High-Speed Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 5/8″ Body Diameter, 4-3/8″ Overall Length - Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.

 

Chicago Latrobe 150L Left-Hand Reverse Flute High-Speed Steel Jobber Length Drill Bit Set Uncoated 118 Degree Conventional Point 29-Piece

Chicago Latrobe 150L Left-Hand (Reverse) Flute High-Speed Steel Jobber Length Drill Bit Set, Uncoated, 118 Degree Conventional Point, 29-Piece

Chicago Latrobe 150L Left-Hand (Reverse) Flute High-Speed Steel Jobber Length Drill Bit Set, Uncoated, 118 Degree Conventional Point, 29-Piece - Uncoated (bright) finish is an untreated surface that can be used on a range of materials, especially soft metals. High-speed steel (hss) provides hardness for wear resistance. Left-hand helix for counterclockwise drilling and broken screw removal. Set of 29 jobber length drill bits includes inch sizes 1/16″ through 1/2″ in 1/64″ increments. 118-degree conventional point for a range of drilling applications.

 

KEO 33345 Cobalt Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 120 Degree Point Angle 34 Body Diameter 8 Overall Length

KEO 33345 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 3/4″ Body Diameter, 8″ Overall Length

KEO 33345 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 3/4″ Body Diameter, 8″ Overall Length - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems.

 

KEO 38347 Cobalt Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 82 Degree Point Angle 34 Body Diameter 10 Overall Length

KEO 38347 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 82 Degree Point Angle, 3/4″ Body Diameter, 10″ Overall Length

KEO 38347 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 82 Degree Point Angle, 3/4″ Body Diameter, 10″ Overall Length - Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

KEO 34120 Solid Carbide NC Spotting Drill Bit TiN Coated Round Shank Right Hand Flute 90 Degree Point Angle 12 Body Diameter 3 Overall Length

KEO 34120 Solid Carbide NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 90 Degree Point Angle, 1/2″ Body Diameter, 3″ Overall Length

KEO 34120 Solid Carbide NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 90 Degree Point Angle, 1/2″ Body Diameter, 3″ Overall Length - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools.

 

KEO 34380 Solid Carbide NC Spotting Drill Bit TiN Coated Round Shank Right Hand Flute 90 Degree Point Angle 38 Body Diameter 2-12 Overall Length

KEO 34380 Solid Carbide NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 90 Degree Point Angle, 3/8″ Body Diameter, 2-1/2″ Overall Length

KEO 34380 Solid Carbide NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 90 Degree Point Angle, 3/8″ Body Diameter, 2-1/2″ Overall Length - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. Round shanks allow use with a wide variety of toolholding systems. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

KEO 33123 Cobalt Steel NC Spotting Drill Bit Uncoated Bright Finish Round Shank Right Hand Flute 120 Degree Point Angle 12 Body Diameter 3-34 Overall Length

KEO 33123 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1/2″ Body Diameter, 3-3/4″ Overall Length

KEO 33123 Cobalt Steel NC Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1/2″ Body Diameter, 3-3/4″ Overall Length - Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.

 

KEO 34181 Solid Carbide High Performance NC Spotting Drill Bit TiN Coated Round Shank Right Hand Flute 120 Degree Point Angle 18 Body Diameter 1-12 Overall Length

KEO 34181 Solid Carbide High Performance NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1/8″ Body Diameter, 1-1/2″ Overall Length

KEO 34181 Solid Carbide High Performance NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 120 Degree Point Angle, 1/8″ Body Diameter, 1-1/2″ Overall Length - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools.

 

KEO 34381 Solid Carbide NC Spotting Drill Bit TiN Coated Round Shank Right Hand Flute 120 Degree Point Angle 38 Body Diameter 2-12 Overall Length

KEO 34381 Solid Carbide NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 120 Degree Point Angle, 3/8″ Body Diameter, 2-1/2″ Overall Length

KEO 34381 Solid Carbide NC Spotting Drill Bit, TiN Coated, Round Shank, Right Hand Flute, 120 Degree Point Angle, 3/8″ Body Diameter, 2-1/2″ Overall Length - Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.