Brass Machine Screw, Round Head, Slotted Drive, 1/4″-20, 3/4″ Length (Pack of 25)
- A threaded fastener’s size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Machine screws, also referred to as machine bolts, are often used with nuts or driven into tapped holes. Strength increases with a higher percentage of zinc. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers. Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Round head fasteners have a dome-shaped head. They come in a variety of head types and drive styles, but are generally available in smaller sizes. The typical composition is 70% copper and 30% zinc. Brass is easily soldered and brazed and accepts plating readily. An older style of head, it is typically used when replacing existing round-head fasteners where an exact match is desired.
8/32 X 1/2″ Brass Round Head Slotted Machine Screws (Pack of 12)
- Head height 0120″. 8/32 x 1/2″ brass round head slotted machine screws (pack of 12). 18-8 stainless steel provides strength and offers good corrosion resistance in many environments. Head diameter 0309″. Phillips drive size #2.
SOLID BRASS MACHINE SCREWS PAN HEAD SLOTTED M5 5MM X 25MM ( pack of 10 )
- Designed for use with nuts or pre tapped holes. . Machine screw, slotted pan head, solid brass for increased durability.
330 Brass Machine Screw, Plain Finish, Pan Head, Phillips Drive, 2″ Length, #6-32 Threads (Pack of 100)
- 330 brass provides corrosion resistance and offers thermal and electrical conductivity. Plain surface has no finish or coating. Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.
Knurled Head Thumb Screws – Solid Brass Machine Screws – #10-32 x 1/2″ QTY 25
- Hardness 40-75 rockwell b. Thread direction right hand. Head diameter max 9/16″ head height 3/8″. Body diameter (#10) max 01890, min 01818 (class 2a fit, ansi b11). Thread pitch 32 per inch.
Knurled Head Thumb Screws – Solid Brass Machine Screws – #10-32 x 3/4″ QTY 100
- Body diameter (#10) max 01890, min 01818 (class 2a fit, ansi b11). Head diameter max 9/16″ head height 3/8″. Hardness 40-75 rockwell b. Thread pitch 32 per inch. Thread direction right hand.
1/4″-20×2 1/2″ PHIL PAN HEAD Brass Machine Screw (100/box)
- Plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 330 brass provides corrosion resistance and offers thermal and electrical conductivity. Pan head has a flat top and short vertical sides with a rounded top edge.
Lift The Dot Stud Nickel/Brass with a #8-32 5/8″ Brass Machine Screw , 10 Pc.
- 10 piece lift the dot stud nickel/brass with a brass #8-32 5/8″ inch long machine screw top quality dot brand fastener, durable and long lasting.
330 Brass Machine Screw, Plain Finish, Round Head, Slotted Drive, 1/2″ Length, #2-56 Threads (Pack of 100)
- The 330 brass machine screw has a plain finish and a round head with a slotted drive. The material is nonmagnetic. The slotted drive has a linear slot for use with a flat-blade driver. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. The 330 brass alloy provides corrosion resistance and offers thermal and electrical conductivity. The round head has a domed shape. Machine screws are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw.
8/32 X 3/4″ Brass Round Head Slotted Machine Screws (Pack of 12)
- Hardness 40-75 rockwell b. Thread pitch 24 per inch. Head diameter max 9/16″ head height 3/8″. 8/32 x 3/4″ brass round head slotted machine screws (pack of 12). Thread direction right hand.
Knurled Head Thumb Screws – Solid Brass Machine Screws – 1/4″-20 x 3/4″ QTY 100
- Head diameter max 23/32″ head height 1/2″. Thread direction right hand. Body diameter (1/4″) max 02489, min 02408 (class 2a fit, ansi b11). Thread pitch 20 per inch. Hardness 40-75 rockwell b.
Knurled Head Thumb Screws – Solid Brass Machine Screws – #10-32 x 1″ QTY 25
- Thread direction right hand. Thread pitch 32 per inch. Body diameter (#10) max 01890, min 01818 (class 2a fit, ansi b11). Head diameter max 9/16″ head height 3/8″. Hardness 40-75 rockwell b.
Knurled Head Thumb Screws – Solid Brass Machine Screws – #10-32 x 3/4″ QTY 25
- Thread direction right hand. Hardness 40-75 rockwell b. Body diameter (#10) max 01890, min 01818 (class 2a fit, ansi b11). Thread pitch 32 per inch. Head diameter max 9/16″ head height 3/8″.
6/32 X 1-1/2″ Brass Round Head Slotted Machine Screws (Box of 100)
- Kit includes 18pc, 1/4″-20 nuts, 45pc, 10-24 nuts, 8pc, 1/4-20 x 1″ round bolts, 16pc, 10-24 x 1/2″ round bolts, 10pc, 1/4″-20 x 1/2″ round bolts, 5pc, 10-24 x 1-1/4″ round bolts, 16pc 10-24 x 3/4″ round bolts, 8pc, 10024 x 1″ round bolts. 6/32 x 1-1/2″ brass round head slotted machine screws (box of 100). Machine screws are used for fastening materials together by going into a tapped hole or through a hole and being held by a nut,. Great kit for home, garage, and work, comes in a handy container fits neatly in kitchen and office drawers, hardware and craft cabinet. Enjoy the handy machine screws assortment, a variety of many useful sizes to meet your needs for different projects.
Lift The Dot Socket, Backing Plate & 5/8″ Brass Machine Screw, 20 Piece Set
- Marine grade and high quality these fasteners will last for years. Included in this set are 20 of the lift the dot sockets with backing plates as well as 20 of the 5/8″ brass machine screw studs. The manufactured from nickel plated brass which is the industry standard for these items. Northwest tarp & canvas, bellingham, washington. 20 piece lift the dot fastener set. Questions send us an e-mail here on amazon. These are the original lift the dot fastener’s manufactured by the dot scoville company. We respond to all e-mails within 24 hours and usually much faster. Nuts not included.
Knurled Head Thumb Screws – Solid Brass Machine Screws – #10-24 x 3/8″ QTY 25
- Thread direction right hand. Hardness 40-75 rockwell b. Body diameter (#10) max 01890, min 01818 (class 2a fit, ansi b11). Thread pitch 24 per inch. Head diameter max 9/16″ head height 3/8″.
Brass Machine Screw, Plain Finish, Pan Head, Phillips Drive, 1/4″ Length, #6-32 Threads (Pack of 100)
- Plain surface has no finish or coating. Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Brass provides corrosion resistance and offers thermal and electrical conductivity.
Brass Machine Screw, Plain Finish, Flat Head, Slotted Drive, 3/32″ Length, #000-120 UNM Threads, Made in US (Pack of 100)
- Brass provides corrosion resistance and offers thermal and electrical conductivity. Plain surface has no finish or coating. Flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface. Slotted drive has a linear slot for use with a flat-blade driver. Made in usa.
Brass Machine Screw, Plain Finish, Flat Head, Phillips Drive, 1″ Length, #4-40 Threads (Pack of 100)
- Brass provides corrosion resistance and offers thermal and electrical conductivity. Flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface. Plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
