Top 19 Best Water Hammer Arrestors

 

LF150HA 34 inch Lead Free Thread for 12 inch Water Hammer Arrestor

LF150HA 3/4 inch Lead Free Thread for 1/2 inch Water Hammer Arrestor

LF150HA 3/4 inch Lead Free Thread for 1/2 inch Water Hammer Arrestor - P. Watts 0121229, lf150ha, 3/4 inch lead free thread for 1/2 inch water hammer arrestor, series lf150 water hammer arrestors are used in residential applications to control water pressure shock and prevent water hammer conditions. S. Specificationsmodel lf150ha is a 3/4 in. 3 bar)maximum shock pressure 200psi (13. It can be installed in new or existing plumbing systems in any angle. (Adapter only)maximum working pressure 150psi (10. . 8 bar)maximum velocity 10 f. It consists of a pre-charged air chamber that is rechargeable, an air-tight sealing cap, standard tire valve connection for easy charging, stainless steel top, sealed-in diaphragm, lower stainless steel chamber, and brass hex adapter for easy installation. Fitting.

 

Zurn Wilkins Z1700-200 Shoktrol Water Hammer Arrestors 34 Inlet x 3-12 Height

Zurn Wilkins Z1700-200 Shoktrol Water Hammer Arrestors, 3/4″ Inlet x 3-1/2″ Height

Zurn Wilkins Z1700-200 Shoktrol Water Hammer Arrestors, 3/4″ Inlet x 3-1/2″ Height - Round top. Shoktrol water hammer arrestor. Bellow. 3-3/8 inch dia top size. 3/4 inch inlet size.

 

SharkBite 22633LF 1-Inch Commercial SharkBite Water Hammer Arrestor

SharkBite 22633LF 1-Inch Commercial SharkBite Water Hammer Arrestor

SharkBite 22633LF 1-Inch Commercial SharkBite Water Hammer Arrestor - Compact, robust dzr brass body is the foundation of a strong, corrosion resistant, durable fitting. No soldering, clamps, unions or glue required. The sharkbite connection system is an instant push-fit connection that connects copper tubing, cts cpvc and pex pipe in any combination. Certified to 200 psi and 200-degreef.

 

Zurn Wilkins Z1700-300 Shoktrol Water Hammer Arrestors 1 Inlet x 4-12 Height

Zurn Wilkins Z1700-300 Shoktrol Water Hammer Arrestors, 1″ Inlet x 4-1/2″ Height

Zurn Wilkins Z1700-300 Shoktrol Water Hammer Arrestors, 1″ Inlet x 4-1/2″ Height - 1 inch inlet size. Bellow. Shoktrol water hammer arrestor. 3-3/8 inch dia top size. Round top.

 

Mini-Rester Water Hammer Arrestor Straight - 12 inch Male CPVC Lead Free

Mini-Rester Water Hammer Arrestor Straight – 1/2 inch Male CPVC (Lead Free)

Mini-Rester Water Hammer Arrestor Straight – 1/2 inch Male CPVC (Lead Free) - Water hammer arresters shall have sufficient volume of air to dissipate the calculated kinetic energy generated in the piping system. 25% lead all miniresters are aa size. Arresters shall be effective when installed at any angle. Straight sweat arresters are compatible with press-fitting systems, such as viega propress and all push-fitting systems cpvc solvent weld arresters install on 1/2′ cpvc tube or fittings in rough-in or retrofit applications products marked with the inch no lead inch icon comply with national, no lead product material requirements and also comply with nsf 61, which allows the product to contain no more than 0. Arresters shall be sized and placed per manufacturer¡¯s instructions. Water hammer arresters shall be ansi/asse 1010 2004 certified. Arresters shall be approved for installation with no access panel required. Sioux chief 660-v82b, mini-rester water hammer arrestor, straight, 1/2 inch male cpvc (lead free), sioux chief 660 series piston-type water hammer arresters shall be required in piping systems.

 

Watts 15M2-B 34 LF15 Lead-Free Water Hammer Arrestor 34 - Lead Free by Watts

Watts 15M2-B 3/4 LF15 Lead-Free Water Hammer Arrestor, 3/4 – Lead Free by Watts

Watts 15M2-B 3/4 LF15 Lead-Free Water Hammer Arrestor, 3/4 – Lead Free by Watts - Npt solid hex brass adapter for easy installation may be installed in concealed locations without access panels and are not rechargeable in the field. May be installed in new or existing plumbing systems with a standard pipe tee vertically, horizontally or at any angle. Factory air charged and permanently capped and solder sealed. Pdi listed air pre-load is 60psi (422 kpa).

 

Mini-Rester Water Hammer Arrestor - 14 inch OD Compression Tee for Ice Maker Tube Lead Free

Mini-Rester Water Hammer Arrestor – 1/4 inch O.D. Compression Tee for Ice Maker Tube (Lead Free)

Mini-Rester Water Hammer Arrestor – 1/4 inch O.D. Compression Tee for Ice Maker Tube (Lead Free) - Install in-line on ice maker lines all mini-resters are aa size all mini-resters are approved for sealed wall installations with no access panel required may be installed at any angle materials arrester body type l copper tube piston poly piston with two epdm o-rings male thread fitting no-lead brass mip thread piston lubrication dow-corning, 111 fda approved silicone compound. This sudden stop results in a tremendous spike of pressure behind the valve which acts like a tiny explosion inside the pipe. Sioux chief 660-gtc0, mini-rester water hammer arrestor, 1/4 inch o. D. Normally, a sufficient pocket of air will absorb such a pressure spike, but if no pocket of air is present, expensive fixtures and appliances within the plumbing system will be damaged as they are left to absorb this pressure spike. Compression tee for ice maker tube (lead free), note image depicts straight mini-rester water hammer occurs when the flow of moving water is suddenly stopped by a closing valve. This pressure spike reverberates throughout the plumbing system, rattling and shaking pipes, until it is absorbed.

 

Quarter Turn Straight Valve 12-Inch FIP by 38-Inch OD Compression with Water Hammer Arrestor Lead-Free

Quarter Turn Straight Valve 1/2-Inch FIP by 3/8-Inch OD Compression with Water Hammer Arrestor, Lead-Free

Quarter Turn Straight Valve 1/2-Inch FIP by 3/8-Inch OD Compression with Water Hammer Arrestor, Lead-Free - . Plumb pak’s lead-free quarter-turn straight valve 1/2 fip by 3/8 od compression with water hammer arrestor is heavy duty, with an attached water hammer arrestor. Water hammer operates in any position once installed and eliminates ‘knocking’ in pipes.

 

PERLICK 54838  Water Hammer Arrestor

PERLICK 54838 Water Hammer Arrestor

PERLICK 54838 Water Hammer Arrestor - Perlick genuine oem replacement part. Use genuine oem parts for safety reliability and performance. 54838, water hammer arrestor. Perlick is a national leader in total package bar and beverage systems manufacturing.

 

Water Hammer Arrestor 12 In NPT 150 psi

Water Hammer Arrestor, 1/2 In NPT, 150 psi

Water Hammer Arrestor, 1/2 In NPT, 150 psi - Price for each max pressure 150 psi temp range 33 degrees to 180 degrees f overall height 4-5/16″ body material stainless steel with brass adapter item water hammer arrestor factory set pressure 25 to 35 psi connection type mnpt diameter 4-13/32″ pipe size 1/2″ country of origin (subject to change) united states. Contour box design allows easy valve access and operation. The sharkbite ice maker outlet box is integrated with sharkbite ends to allow for quick & easy installation of a water main supply to an appliance. Provides quick, safe water supply and shutoff for refrigerator ice maker and water dispenser appliances.

 

Zurn Wilkins 1250-C 1 Water Hammer Arrestor

Zurn Wilkins 1250-C 1″ Water Hammer Arrestor

Zurn Wilkins 1250-C 1″ Water Hammer Arrestor - The water hammer arrester may be installed within a stud bay without the need for an access panel. This excessive pressure surge is absorbed by the pre-charged cushion of air permanently sealed within the water hammer arrester. . Designed to protect residential, commercial and industrial water lines during pressure surges following quick valve closure.

 

4 Pack Sioux Chief 12 Water Hammer Arrestor

4 Pack Sioux Chief 1/2” Water Hammer Arrestor

4 Pack Sioux Chief 1/2” Water Hammer Arrestor - Factory air charged. New or existing lines. Lead free. Temperature range of 33f to 180f.

 

PPP SC-1000 1 NPT Threaded Water Hammer Arrestor

PPP SC-1000, 1″ NPT, Threaded Water Hammer Arrestor

PPP SC-1000, 1″ NPT, Threaded Water Hammer Arrestor - Spike pressure 1,500 psig. Water hammer arrestors are specified for both commercial and residential uses, for commercial laundrys, restaurants, motels and for dish washers and laundry equipment in the home. This design assures that 100% of the surge or shock will be arrested on initial impact. A maintenance-free installation is assured when using this type of arrestor, the only moving part is the free-moving piston furnished with “o” ring seals which have been tested for reliability in excess of normal operating ranges. Normal operating pressure 35 to 250 psig. Ca/vt compliant. Ppp sc-1000, 1″ npt, threaded water hammer arrestor features 6-3/4″ length, 1″ npt connection may be installed in new or existing plumbing systems with a standard pipe tee maintenance free, the piston is the only moving part tested in excess of 500 psi tempature range -40f to +212f (-54c to +100c) barrel-fabricated of type “k” hard drawn copper operating pressure designed to operate on all domestic and commercial line pressures. Ppp sc-1000, 1″ npt, threaded water hammer arrestorprecision plumbing productsppp water hammer arrestors are engineered to permit the impact or attaching end to match the internal cross sectional area of piping in which it is to be installed.

 

Jay R Smith 520-T-A Water Hammer Arrestor Copper Threaded Connection Type

Jay R. Smith 520-T-A Water Hammer Arrestor, Copper, Threaded Connection Type

Jay R. Smith 520-T-A Water Hammer Arrestor, Copper, Threaded Connection Type - . The factory set pressure is 60 with a max pressure of 350 psi, with a temperature range of 33-250 degrees. 6 7/8 inch copper water hammer arrestor, threaded connection type.

 

Zurn Wilkins Z1700-400 Shoktrol Water Hammer Arrestors 1 Inlet x 6-58 Height

Zurn Wilkins Z1700-400 Shoktrol Water Hammer Arrestors, 1″ Inlet x 6-5/8″ Height

Zurn Wilkins Z1700-400 Shoktrol Water Hammer Arrestors, 1″ Inlet x 6-5/8″ Height - Round top. 3-3/8 inch dia top size. 1 inch inlet size. Shoktrol water hammer arrestor. Bellow.

 

Watts 15M2-B 34 LF15 Lead-Free Water Hammer Arrestor 34 - Lead Free Model 34 LF15 Misc

Watts 15M2-B 3/4 LF15 Lead-Free Water Hammer Arrestor, 3/4 – Lead Free Model: 3/4 LF15 Misc.

Watts 15M2-B 3/4 LF15 Lead-Free Water Hammer Arrestor, 3/4 – Lead Free Model: 3/4 LF15 Misc. - Asse and ansi approved, pdi certified, and iampo listed. Product informationthe watts leadfree water hammer arrestor, 3/4 (3/4 lf15) are used in commercial and industrial applications to control water pressure shock and prevent water hammer conditions. Optional 15ak adapters available. The lf15 consists of a lead free copper body, epdm seals and orings, brass piston and cap, and npt threaded brass hex adapter. 3 bar) features#149 npt solid hex brass adapter for easy installation#149 may be installed in concealed locations without access panels and are not rechargeable in the field. 3 bar) working pressure#149 temperature range 33f to 180f (0. Maximum working pressure 150psi (10. Series lf15 is factory air charged and is not rechargeable. #149 may be installed in new or existing plumbing systems with a standard pipe tee vertically, horizontally or at any angle. #149 factory air charged and permanently capped and solder sealed. #149 pdi listed#149 air preload is 60psi (422 kpa) specifications#149 operating pressure designed to operate on all domestic and commercial lines at 150 psi (10. Series lf15 is ideal for commercial dishwashers, clothes washers, and quickclosing faucets. 5c to 82c). It can be installed in new or existing plumbing systems in concealed locations with a standard pipe tee in any angle.

 

SharkBite 25033 Ice Maker Outlet Box with Water Hammer Arrestors by SharkBite

SharkBite 25033 Ice Maker Outlet Box with Water Hammer Arrestors by SharkBite

SharkBite 25033 Ice Maker Outlet Box with Water Hammer Arrestors by SharkBite - The sharkbite ice makeroutlet box is integrated with sharkbite ends to allow for quick & easy installationof a water main supply to anapplianceprovides quick, safe water supply and shutoff forrefrigerator ice maker and water dispenser appliancesquarter-inch turn valves provide easy on-off water supply adjustmentcontour box design allows easy valve access and operation.

 

SharkBite 25031 Washing Machine Outlet Box with Water Hammer Arrestors by SharkBite

SharkBite 25031 Washing Machine Outlet Box with Water Hammer Arrestors by SharkBite

SharkBite 25031 Washing Machine Outlet Box with Water Hammer Arrestors by SharkBite - The sharkbite washing machine outlet box is integrated with sharkbite ends to allow for quick & easy installation in residential laundry spacesprovides quick, safe water supply and shutoff for washing machinesquarter-inch turn valves provide easy on-off water supply adjustmentrecessed installation eliminates exposed piping.

 

SharkBite 22632LF 34-Inch Residential SharkBite Water Hammer Arrestor by SharkBite

SharkBite 22632LF 3/4-Inch Residential SharkBite Water Hammer Arrestor by SharkBite

SharkBite 22632LF 3/4-Inch Residential SharkBite Water Hammer Arrestor by SharkBite - The sharkbite connection system is an instant push-fit connection that connects copper tubing, cts cpvc and pex pipe in any combinationno soldering, clamps, unions or glue requiredcertified to 200 psi and 200-degreefcompact, robust dzr brass body is the foundation of a strong, corrosion resistant, durable fitting.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.