Top 18 Flush Cut Saws

 

Eazy Power 50693 Oscillating Titanium Coated Bi-Metal Flush Cut Saw Blade, 1-15/16″ - Titanium coated bi-metal teeth, provides up to 10 times the life over standard high speed steel blades. Universal arbor allows for use in most major power tool manufacturers tools. Suitable for cutting a broad range of materials, including wood, metal, plastics & drywall.

 

Gyokucho Razorsaw Flush Cutting Double Edge Saw 125mm with Wood Handle - The thin and flexible (00012˝) blade is designed for very clean flush cuts as well as very fine cuts in narrow material. On one edge, there are 32 cross-cut teeth per inch for hardwoods and on the other edge, 21 cross-cut teeth per inch for softwoods. Made for both hardwoods and softwoods. Handle made from beech wood. Blade size of 5″ x 1-1/4˝ and an overall length of 10-1/2˝.

 

Handyman Club of America Flush Cut Saw D1453 - L77411 used to trim wooden nails and plugs flush wooden nail saws are used to trim wooden nails and plugs flush with the surface of your work. These saws are also great for cutting a fine kerf in small work blade length is 6˝ overall length is 13˝ with 19 tpi the hardwood handle is made for years of comfortable use solid brass attachment screws. The blade is thin and flexible, so when in use, it can be bent with a portion of the blade held flat against the work surface the teeth have little or no set to avoid scratching your work.

 

Eazy Power 50694 Oscillating Titanium Coated Bi-Metal Flush Cut Saw Blade, 1-3/4″ - Universal arbor allows for use in most major power tool manufacturers tools. Suitable for cutting a broad range of materials, including wood, metal, plastics & drywall. Titanium coated bi-metal teeth, provides up to 10 times the life over standard high speed steel blades.

 

Router Tool Router Bit Set Plunge Router Flush Cutter Flush Cut Saw Flush Trim Router Bit Pattern Router Bit Trim Router Bit 1/4″ SH 1/2″ Dia. 1-1/2 Blade Top & Bottom Bearing Super-Deals-Shop - Flush pattern trim router bit excellent for template work wood router tool. Flush trim router bit high quality router bits. Flush trim router bit cuts all compostion materials wood shims on wood jointer. C2 carbide tipped, micro grain grade provides increased strength wood trim best router. 1 pc 1/4″ shank 1/2″ diameter 1-1/2″ blade top & bottom bearing trim router bit flush cutters.

 

12 in. Flush Cut Saw from TNM by Portland Saw - Titanium coated bi-metal teeth, provides up to 10 times the life over standard high speed steel blades. Suitable for cutting a broad range of materials, including wood, metal, plastics & drywall. Universal arbor allows for use in most major power tool manufacturers tools.

 

SUIZAN Japanese Hand Saw Pull Saw 7 Inch Flush Cut Saw Trim Saw for Woodworking - Japanese steel all suizan japanese saws are consisted of top quality japanese steel it uses high quality japanese steel, which makes cuts to be sharp. Made in japan all suizan products are manufactured in japan by japanese master craftsmenwith a history of over 100 years in making japanese hand tools, all of the process gone into making tools were completed in one of japan’s towns known for their craft making tradition sanjō in niigata. Japanese style pull saw this product is a “pull saw” what most people are used to are european saws, which cut materials via pushing, thus are called “push saws” on the other hand, japanese saws cut materials via pulling and thus are called “pull saws,” which is what this product is in comparison to “push saws,” “pull saws” are lighter in weight, requires less power, and the resulting edge is cleaner. Diversify your woodworking life no matter you are a master or a beginner in using saws, it gives you brand new experience from using tranditional western style saws, and enables you to make more varified woodworkings products and thus change your life.

 

Hosco 120mm Flush Cut Saw VWWS - The blade is thin and flexible, so when in use, it can be bent with a portion of the blade held flat against the work surface the teeth have little or no set to avoid scratching your work. 120mm flush cut saw. L77411 used to trim wooden nails and plugs flush wooden nail saws are used to trim wooden nails and plugs flush with the surface of your work.

 

Eazy Power 50690 Oscillating Titanium Coated Bi-Metal Flush Cut Saw Blade, 1-1/8″ - Suitable for cutting a broad range of materials, including wood, metal, plastics & drywall. Titanium coated bi-metal teeth, provides up to 10 times the life over standard high speed steel blades. Universal arbor allows for use in most major power tool manufacturers tools.

 

5 Pcs 11.9″ Pull Saw Traditional Japanese Style Pull Stroke Hand Saw Flush Cut Fine Woodwork - These are the classic traditional style saws used by master japanese craftsmen carpenters to create legendary fine detailed joinery work pullsaws cut on the pull stroke rather than the push stroke of american and european saws, far surpassing typical western saws on similar cuts. Excellent detail saw very accurate produces great cuts leaves a smooth surface finish on end grain ideal for anyone doing intricate wood work a must for fine woodworking perfect for cutting fine dovetails, tenons, miters, baseboards, trim and moldings, custom woodwork, furniture making, cabinetry, cuts wood like a charm it can also cut fiberglass and assorted plastics. The thin blade also makes it very flexible for use as a flush cut saw you can actually bow and press the flat of the blade against surface material for flush-cutting operations like trimming door jambs and cutting shims or cutting protruding dowel plugs flush & smooth. Japanese style saws start a cut quick & easy, and cut much faster with minimal effort and high accuracy they require less force to use, and bind & buckle far less than ordinary blades a minimal kerf is excellent where a narrow blade is needed and means you can easily get incredibly fine, accurate cuts. Total assembled size 119″/ 303cm x 15″/ 4cm handle (unattached) 1″/ 3cm x 575″ / 15cm.

 

Silverline Flush Cut Saw 150mm 22tpi - For trimming dowels and other flush cutting jobs. Highly flexible blade. Highly flexible and thin with zero set teeth. Plastic handle. Suitable for woodworking and general diy use.

 

9-1/4″ Flush Cut Saw for Plastic, Wood, 5″ - Specification hand saw product grouping flush cut sawshand saw application plastic,wooditem flush cut sawlength 9-1/4″blade length 5″teeth per inch 52blade material steeltether capable standard tool (accessory needed for tethering)insulated / uninsulated uninsulatednonsparking nohandle design lightweight aluminumfunction for tight, hard to reach placesfeatures comfort grip handlenumber of pieces 1includes removable handle”. Flush cut saws are specifically made to make flush cuts ” for protruding joints or fasteners ” without damaging the surface that is being cut along.

 

Eazypower 50691 22mm 7/8″ Oscillating Titanium Coated Bi-Metal Flush Cut Saw Blade, (1per Pack) - Universal arbor allows for use in most major power tool manufacturers’ tools. Titanium coated bi-metal teeth, provides up to 10 times the life over standard high speed steel blades. Suitable for cutting a broad range of materials including wood, metal, plastics and drywall. 22-millimeter 7/8-inch oscillating titanium coated bimetal flush cut saw blade. Quantity 1 per pack.

 

12 in. Flush Cut Saw from TNM - Universal arbor allows for use in most major power tool manufacturers tools. Unique shape allows for flush cuts in hard to reach places. Used for cutting wood, chipboard, plastic, metal, sheet metal, aluminum & blackboard. Bi-metal steel construction allows for long life and superior cutting performance in a wide verity of materials.

 

11.9″ Pull Saw Traditional Japanese Style Pull Stroke Hand Saw Flush Cut Fine Woodwork + One Replacement Blade - These are the classic traditional style saws used by master japanese craftsmen carpenters to create legendary fine detailed joinery work pullsaws cut on the pull stroke rather than the push stroke of american and european saws, far surpassing typical western saws on similar cuts. The thin blade also makes it very flexible for use as a flush cut saw you can actually bow and press the flat of the blade against surface material for flush-cutting operations like trimming door jambs and cutting shims or cutting protruding dowel plugs flush & smooth. Total assembled size 119″/ 303cm x 15″/ 4cm handle (unattached) 1″/ 3cm x 575″ / 15cm. Excellent detail saw very accurate produces great cuts leaves a smooth surface finish on end grain ideal for anyone doing intricate wood work a must for fine woodworking perfect for cutting fine dovetails, tenons, miters, baseboards, trim and moldings, custom woodwork, furniture making, cabinetry, cuts wood like a charm it can also cut fiberglass and assorted plastics. Japanese style saws start a cut quick & easy, and cut much faster with minimal effort and high accuracy they require less force to use, and bind & buckle far less than ordinary blades a minimal kerf is excellent where a narrow blade is needed and means you can easily get incredibly fine, accurate cuts.

 

11.9″ Pull Saw Traditional Japanese Style Pull Stroke Hand Saw Flush Cut Fine Woodwork + 3 Pcs Replacement Blade - Japanese style saws start a cut quick & easy, and cut much faster with minimal effort and high accuracy they require less force to use, and bind & buckle far less than ordinary blades a minimal kerf is excellent where a narrow blade is needed and means you can easily get incredibly fine, accurate cuts. Total assembled size 119″/ 303cm x 15″/ 4cm handle (unattached) 1″/ 3cm x 575″ / 15cm. The thin blade also makes it very flexible for use as a flush cut saw you can actually bow and press the flat of the blade against surface material for flush-cutting operations like trimming door jambs and cutting shims or cutting protruding dowel plugs flush & smooth. Excellent detail saw very accurate produces great cuts leaves a smooth surface finish on end grain ideal for anyone doing intricate wood work a must for fine woodworking perfect for cutting fine dovetails, tenons, miters, baseboards, trim and moldings, custom woodwork, furniture making, cabinetry, cuts wood like a charm it can also cut fiberglass and assorted plastics. These are the classic traditional style saws used by master japanese craftsmen carpenters to create legendary fine detailed joinery work pullsaws cut on the pull stroke rather than the push stroke of american and european saws, far surpassing typical western saws on similar cuts.

 

Fein 6-35-02-116-01-4 Thin Diamond Coated Flush Cut Saw Blade - Double sided blade for convenient cutting from the left or the right. Flexible blade for flush cutting plugs and dowels. 23-point tooth geometry cuts quickly and cleanly on the pull stroke. For removing grout or morter 3/64-inch thick. New ergonomically designed cushion grip handle for comfort.

 

Hishika Flush Cut Saw (Nail Saw) with Replaceable Blade L77411 - Solid brass attachment screws. These saws are also great for cutting a fine kerf in small work. The teeth have little or no set to avoid scratching your work. Used to trim wooden nails and plugs flush wooden nail saws are used to trim wooden nails and plugs flush with the surface of your work. Blade length is 6˝ overall length is 13˝ with 19 tpi. The blade can be easily replaced if necessary. The blade is thin and flexible, so when in use, it can be bent with a portion of the blade held flat against the work surface. The hardwood handle is made for years of comfortable use. L77411.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.