Yonico 15129 Small Lock Miter Router Bit with 45-Degree 1/2-Inch Stock 1/2-Inch Shank by Yonico
- Used to flatten large wood slabs and level a workbench or piece of wood runs smooth, no burning, cuts clean and fast. This carbide-tipped bit use a two-flute bit where fine finish is paramount and two flutes coulld balance the bit, eliminating vibration that degrades the cut finish. Works well for surfacing the spoil board on a cnc machine and homemade sliding frame to smooth the rough face of a wood slab, excellent for cutting the mortise for butt door hinges. Bosch 84508m 3-1/8-inch diameter 1-3/8-inch cut carbide tipped lock miter router bit 1/2-inch shank. Yonico 15129 small lock miter router bit with 45-degree 1/2-inch stock 1/2-inch shank.
Amana Tool 55389 Carbide Tipped Lock Miter 45 Deg x 1-3/4 D x 7/8 CH x 1/2 Inch SHK Router Bit for 3/8 – 3/4 Material
- Carbide tipped. 1/2 inch shank.
Yonico 15220 22.5-Degree Lock Miter Glue Joint Router Bit Set 1/2-Inch Shank
- This set will cut 22. Two flute carbide cutters & 1/2″ shanks. Great for 8 sided projects such as planters. 5 degree miters to make 45 degree joints. Set comes in a solid wood storage case. Put a 45 degree joint in place of a 90 degree angle to soften a sharp look. Then, you can cover the new surface with a column for added beauty.
45 Lock Miter Router Bit -1/2 in Shank by Rockler
- This carbide-tipped bit use a two-flute bit where fine finish is paramount and two flutes coulld balance the bit, eliminating vibration that degrades the cut finish. Works well for surfacing the spoil board on a cnc machine and homemade sliding frame to smooth the rough face of a wood slab, excellent for cutting the mortise for butt door hinges. Used to flatten large wood slabs and level a workbench or piece of wood runs smooth, no burning, cuts clean and fast. 45 lock miter router bit -1/2 in shank. Two carefully engineered flutes cut aggressively and cleanly, and cut per revolution yield a smooth surface, but feed rate is slightly reduced.
SKIL 91703 Lock Miter Router Bit
- Manufactured and designed to the highest quality standards. Overall length 15/16-inch. Cutter length 13/16-inch. Diameter size 1-3/4-inch. Controlled depth of cut minimizes kickback.
Yonico 15129 Small Lock Miter Router Bit with 45-Degree 1/2-Inch Stock 1/2-Inch Shank
- Simply set the center of the stock to the center of the bit. Ideal for use with 1/2″ stock. Additionally, it will provide extra gluing surface resulting in an extremely strong and durable joint. The interlocking 45° cuts will produce extremely strong joints without having to struggle to keep the boards in place during clamping. Then, cut one piece horizontally and the second one vertically. Two flute carbide cutters & 1/2″ shank. When positioned properly, the bit will cut both pieces of stock without having to adjust the bit. Use the reversible 45° lock miter glue joint router bit to join boards at 90°.
Freud 99-035 45-Degree Lock Miter Router Bit with 1/2″ Shank (7/8″ Height)
- Freud’s precision ground carbide bits have a grain size smaller than other grades and titanium is added making them impervious to chemical attack. Overall diameter 2-11/64-inch, shank diameter 1/2-inch. . Promoting safer woodworking is the reason freud made a commitment to develop anti-kickback router bits. Bits are computer balanced to insure vibration-free operation at speeds that are a safe margin above the typical 22,000 rpms of most routers. Freud’s philosophy is woodworkers should expect safety, not pay for it.
Freud 2-3/4″ Diameter Lock Miter Router Bit with 1/2″ Shank (99-034)
- Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Easy to join by running one board vertically and the joining board horizontally. Ideal for humidors and jewelry boxes run one board vertically and run the piece to be joined horizontally. Computer-balanced for vibration-free operation. Ideal for creating interlocking 90° corner joints. Produces locking miter joints in a snap. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on 1/2″ to 1″ stock. 2-3/4-inch bit diameter 1/2-inch shank diameter. Precision-ground carbide bits are made with added titanium impervious to chemical attack.
SET-002, Pre-Machined Set-Up Blocks For Infinity Tools Lock Miter Router Bit Part #55-502
- For use with 3/4″ stock only, will work with most manufacturer’s bits. These new jigs are so handy we wouldn’t go into the shop without them. Just line-up the 3/4″ thick block so it matches the profile of your cutter and your done. Made from pre-machined high density plastic they will make frustrating bit set-up’s a thing of the past. The height of your bit is automatically set so you don’t have to make any trial cuts so you don’t wase time or material.
Yonico 15334 Lock Miter 45-Degree Glue Joint Router Bits 1/2-Inch Shank, Set of 3
- Use the yonico 15334, 45° lock miter router bit set to join boards at 90°. Additionally, lock miter cuts will provide extra gluing surface resulting in an extremely strong and durable joint. The yonico 15334 lock miter bits set is reversible. When positioned properly, one mitre bit will cut both pieces of stock without having to adjust the bit. The smallest miter lock bit is 1-3/8″ diameter and will work best with 1/2″ stock. The yonico 15334 lock mitre set includes 3 of the most popular lock miter bits for a range of stock sizes. The medium sized lock miter router bit has a 2″ diameter and is suited for 3/4″ stock. Two flute carbide router bit cutters and 1/2″ shanks. With fence in place, set the center of the stock to the center of the miter bit. The interlocking 45° miter lock cuts will produce extremely strong joints without having to struggle to keep boards in place during clamping. Then, cut one piece of stock horizontally and the second one vertically. The largest miter lock bit has a 2-3/4″ diameter and is suited for up to 1″ thick stock. Set comes in a solid wood storage case.
Freud 99-035 45-Degree Lock Miter Router Bit with 1/2 Shank (7/8 Height) by Freud
- 2-11/64 overall diameter (d)7/8 carbide height (h)45 angle (d)1/2 shank diameter (a)2-3/8 overall length (h).
Yonico 15127 Medium Lock Miter Router Bit with 45-Degree 3/4-Inch Stock 1/2-Inch Shank by Yonico
- Industrial quality router bitsc3 micro-grain tungsten carbide cutterssolid hardened steel bodies with anti-kickback designbuild-up & heat resistant teflon coatingsatisfaction guaranteed & lifetime warrantybuild-up and heat resistant teflon coatingsatisfaction guaranteed and lifetime warranty.
Yonico 15127 Medium Lock Miter Router Bit with 45-Degree 3/4-Inch Stock 1/2-Inch Shank by Yonico
- Industrial quality router bitsc3 micro-grain tungsten carbide cutterssolid hardened steel bodies with anti-kickback designbuild-up & heat resistant teflon coatingsatisfaction guaranteed & lifetime warrantybuild-up and heat resistant teflon coatingsatisfaction guaranteed and lifetime warranty.
Amana Tool 55390 45-Degree Lock Miter 2-11/16-Inch Diameter by 1/2-Inch Shank Router Bit
- Full color instructions included learn step-by-step with master craftsman lonnie bird. Carbide tipped, industrial quality. For 1/2, 1-1/8-inch material. Max rpm = 18,000. 2-11/16 diameter, 1-3/16-inch cutting height, 45 degree radius, 1/2-inch shank.
Yonico 15129 Small Lock Miter Router Bit with 45-Degree 1/2-Inch Stock 1/2-Inch Shank by Yonico
- Yonico 15129 small lock miter router bit with 45-degree 1/2-inch stock 1/2-inch shank. Solid hardened steel bodies with anti-kickback design. High hook & shear angles allow cutters to slice smoothly into stock producing clean, splinter free. Build-up & heat resistant teflon coating. Baked on heat resistant coating prevents build-up of sawdust, resin, and pitch.
22-/2 Degree Locking Miter Router Bit Set – 2PC Set
- The shanks on this set are 1/2″ the set comes in a wooden storage box. Cnc milling technology producing a balanced, smooth cutting bit. Perfect for making pedestals and more will work with stock up to 3/4 in thickness. Use to make 8 sided boxes without having to calculate the angle. Carbide cutters with non-stick coating to reduce pitch and build-up.
45.0 Degree Lock Miter Router Bits – SHK 1/2 | LD 3-1/2 | CL 1-5/8
- Our carbide-tipped 45. Legend below explains sizing. Note this bit is to be used in a router table application and not in a hand-held router. Select your item(s) then click add to cart. Industrial quality cutting bits manufactured in the usa by southeast tool. 0 degree lock miter router bits are great for drawer or box glue joints and will add strength to any project.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
