3MT TO 2JT DRILL CHUCK ARBOR HARDENED MT3 JT2 JACOBS MORSE TAPER SHANK
- Made of precision ground, high grade tool steel. Long end is 3mt, short end is 2jt. Morse taper #3 (3mt) to jacobs taper #2 (2jt). Our part # all-49528. Arbor will fit all drill chucks that with a 2jt bore and will fit on any machine tool with a 3mt spindle this arbor has a 3/8-16 drawbar thread.
Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, #2 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 25/32″ Size (Pack of 1)
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 25/32-inches size. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 118 degrees conventional point.
Steel Dragon Tools Magnetic Drill MT2 Chuck & Arbor Adapter 1/16″-1/2″ Morse Taper Shank
- 5-13mm) and can be used on any machine with a morse taper holder. Chuck capacity 1/16″-1/2″ (1. Steel dragon tools® magnetic drill mt2 chuck & arbor adapter 1/16″-1/2″ morse taper shankthis heavy duty mt2 chuck & arbor adapter fits any drill bit from 1/16″-1/2″ (1. 5-13mm)shank mt2 morse taper shankchuck key included.
Huot Morse Taper Shank and Taper Length Drill Bit Index for Sizes 49/64″ to 1″ in 1/64″ Increments
- Made of steel with an epoxy finish and has a snap-lock cover for durability and protection. Made in usa. Index holds morse taper shank or taper length drill bits with a straight shank in sizes 49/64″ to 1″ in 1/64″ increments. Labeled storage holes for identification and organization.
Drill America DEWES4-2 Qualtech Extension Socket, #2 Morse Taper Shank, 4-2 Size (Pack of 1)
- #2 morse taper shank. Drill america qualtech extension socket. 4 hole size. .
Drill America DWDTS Series High-Speed Steel Taper Shank Drill Bit, Black Oxide Finish, 3 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 1-1/16″ Size (Pack of 1)
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Designed to perform in a broad range of materials in the iron and steel families. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
Drill America DEWES2-4 Qualtech Extension Socket, #4 Morse Taper Shank, 2-4 Size (Pack of 1)
- #4 morse taper shank. 2 hole size. Drill america qualtech extension socket. .
Drill America DEWA0206 Qualtech Drill Chuck Arbor, #2 Morse Taper Shank To #6 Jacobs Taper (Pack of 1)
- Drill america qualtech drill chuck arbor. . #2 morse taper shank to #6 jacobs taper.
Michigan Drill 203 Series High-Speed Steel General Purpose Drill Bit, #2 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 1″ Size (Pack of 1)
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 118 degrees conventional point. 1-inches size. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters.
Drill America DEWES3-2 Qualtech Extension Socket, #2 Morse Taper Shank, 3-2 Size (Pack of 1)
- #2 morse taper shank. 3 hole size. Drill america qualtech extension socket.
Drill America DEW4MT Qualtech Live Center, #4 Morse Taper Shank (Pack of 1)
- Drill america qualtech live center. #4 morse taper shank.
Chicago Latrobe 110 High-Speed Steel Taper Shank Drill Bit, Black Oxide Finish, #3 Morse Taper Shank, 118 Degree Conventional Point, 1″ Size
- Taper shank made to american national standard (morse) dimensions for use in corresponding morse taper holders. Black oxide finish for increased wear resistance and added lubricity standard from stock. Manufactured from premium high-speed steel. General-purpose geometry for drilling in.
3MT TO 6JT DRILL CHUCK ARBOR HARDENED MT3 JT6 JACOBS MORSE TAPER SHANK
- Made of precision ground, high grade tool steel. Morse taper #3 (3mt) to jacobs taper #6 (6jt). Long end is 3mt, short end is 6jt. Arbor will fit all drill chucks that with a 6jt bore and will fit on any machine tool with a 3mt spindle this arbor has a 3/8-16 drawbar thread. Our part # all-49532.
Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, #4 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 1-1/8″ Size (Pack of 1)
- 118 degrees conventional point. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 1-1/8-inches size. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Drill Chuck Arbor 3/8″ Straight to 33JT Hardened 33JT Jacobs Morse Taper Shank
- Arbor will fit all drill chucks that with a 33jt bore and will fit on any machine tool with a 3/8″ straight spindle. Long end is 3/8″, short end is 3jt. 3/8″ straight shank to jacobs taper #33 (33jt). Made of precision ground, high grade tool steel. Our part # all-49618.
2MT TO 3JT DRILL CHUCK ARBOR HARDENED MT2 JT3 JACOBS MORSE TAPER SHANK
- Long end is 2mt, short end is 3jt. Morse taper #2 (2mt) to jacobs taper #3 (3jt). Our part # all-49517. Made of precision ground, high grade tool steel. Arbor will fit all drill chucks that with a 3jt bore and will fit on any machine tool with a 2mt spindle this arbor has a 3/8-16 drawbar thread.
Drill America DEWA0403 Qualtech Drill Chuck Arbor, #4 Morse Taper Shank To #3 Jacobs Taper (Pack of 1)
- . Drill america qualtech drill chuck arbor. #4 morse taper shank to #3 jacobs taper.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
