Top 17 Best Clamp Locks

 

Vise Grip - CLAMP LOCK PANEL 9 IN

Vise Grip – CLAMP LOCK PANEL 9 IN

Vise Grip – CLAMP LOCK PANEL 9 IN - 9″ locking panel clamp. Patented marinco power products design utilizes color-coded cam levers to open and close windows that accept the conductors. Connections can be made more reliably and more quickly compared to conventional screw termination systems. Ul listed and csa certified. Eliminates terminal self-loosening resulting from heat,
shock, or vibration.

 

ProSource Heavy Duty Anti-Theft Tire Wheel Clamp Lock by ProSource

ProSource Heavy Duty Anti-Theft Tire Wheel Clamp Lock by ProSource

ProSource Heavy Duty Anti-Theft Tire Wheel Clamp Lock by ProSource - Length 8ft, wire size 18 awg, 2-wire. Prosource heavy duty anti-theft tire wheel clamp lock. Input 10a, 125v ac. 100% compatible with original ac power cord 200 days warranty. This cord is made for double insulated tools.

 

Dorian Tool S-CTFP Round Shank Steel Clamp Lock Boring Bar Right Hand Cut 10 Overall Length 1-18 Minimum Bore Diameter 34 Shank Diameter

Dorian Tool S-CTFP Round Shank Steel Clamp Lock Boring Bar, Right Hand Cut, 10″ Overall Length, 1-1/8″ Minimum Bore Diameter, 3/4″ Shank Diameter

Dorian Tool S-CTFP Round Shank Steel Clamp Lock Boring Bar, Right Hand Cut, 10″ Overall Length, 1-1/8″ Minimum Bore Diameter, 3/4″ Shank Diameter - Style f, 0 degree end cutting edge angle for positive triangle tpg 322 inserts. Easier to index or change insert without the lock pin. Allows for an optional chipbreaker to be placed on the insert. Excellent locking ability. Right hand cut.

 

Legrand-Pass Seymour PS615CACC20 15-Amp 250-volt Armored Clamp Lock Connector with Self Centering Cord Grip Heavy Duty Construction by Legrand-Pass Seymour

Legrand-Pass & Seymour PS615CACC20 15-Amp 250-volt Armored Clamp Lock Connector with Self Centering Cord Grip, Heavy Duty Construction by Legrand-Pass & Seymour

Legrand-Pass & Seymour PS615CACC20 15-Amp 250-volt Armored Clamp Lock Connector with Self Centering Cord Grip, Heavy Duty Construction by Legrand-Pass & Seymour - Style f, 0 degree end cutting edge angle for positive triangle tpg 322 inserts. Legrand-pass & seymour ps615cacc20 15-amp 250-volt armored clamp lock connector with self centering cord grip, heavy duty construction. Excellent locking ability. Allows for an optional chipbreaker to be placed on the insert. Right hand cut.

 

GHP Pack of 4 Anti-theft Wheel Lock Clamp Boot Tire Claw Auto Car Truck

GHP Pack of 4 Anti-theft Wheel Lock Clamp Boot Tire Claw Auto Car Truck

GHP Pack of 4 Anti-theft Wheel Lock Clamp Boot Tire Claw Auto Car Truck - Soft coated clamp will not scratch or damage wheels or rims. Made out of weather resistant steel. Adjustable for wheels from 6 3/4”-10 1/2”. Will fit most vehicles including cars, trucks, motorcycles, atv’s, rv’s, golf carts, small aircraft. Highly visible due to bright colors (red & yellow).

 

IRWIN Vise-Grip 11SP20 11-Inch Locking Clamp with Swivel Pads 2 Pack

IRWIN Vise-Grip 11SP(20) 11-Inch Locking Clamp with Swivel Pads (2 Pack)

IRWIN Vise-Grip 11SP(20) 11-Inch Locking Clamp with Swivel Pads (2 Pack) - Turn screw will adjust pressure and fit work. Irwin 11″ original vise-grip locking clamp with swivel pads hold a variety of projects from tapered work to awkward fabrication jobs to delicate projects without causing damage. Turn screws will stay in place for repetitive use at the same setting. Constructed from high-grade, heat-treated allow steel for maximum toughness and durability. Wide-opening jaws provide greater versatility for clamping a variety of shapes. Leveling swivel pads protect materials from damage and come with an easy locking and releasing action that makes use easy and convenient. Includes (2) 11″ original vise-grip locking clamp with swivel pads. Designed with a guarded release trigger that quickly unlocks and protects from accidental release. Size 11″, jaw adjustment 0-4″, throat depth 2-5/8″. With jaws that open up to 4″ and a throat depth of 2-5/8″, these clamps can handle bigger projects.

 

Dorian Tool S-CTFP Round Shank Steel Clamp Lock Boring Bar Right Hand Cut 14 Overall Length 2-364 Minimum Bore Diameter 1-12 Shank Diameter

Dorian Tool S-CTFP Round Shank Steel Clamp Lock Boring Bar, Right Hand Cut, 14″ Overall Length, 2-3/64″ Minimum Bore Diameter, 1-1/2″ Shank Diameter

Dorian Tool S-CTFP Round Shank Steel Clamp Lock Boring Bar, Right Hand Cut, 14″ Overall Length, 2-3/64″ Minimum Bore Diameter, 1-1/2″ Shank Diameter - Easier to index or change insert without the lock pin. Excellent locking ability. Allows for an optional chipbreaker to be placed on the insert. Style f, 0 degree end cutting edge angle for positive triangle tpg 432 inserts. Right hand cut.

 

Marinco CL5266 15 Amp 125 Volt 2 Pole-3 Wire NEMA Configuration 5-15 Clamp-LockTM Plug

Marinco CL5266 15 Amp, 125 Volt, 2 Pole-3 Wire, NEMA Configuration 5-15, Clamp-Lock(TM) Plug

Marinco CL5266 15 Amp, 125 Volt, 2 Pole-3 Wire, NEMA Configuration 5-15, Clamp-Lock(TM) Plug - Eliminates terminal self-loosening resulting from heat,
shock, or vibration. The system eliminates creep
resulting from cold-flow of the strands in stranded wire. Connections can be made more reliably and more quickly compared to conventional screw termination systems. Ul listed and csa certified. Patented marinco power products design utilizes color-coded cam levers to open and close windows that accept the conductors.

 

ProTek RC 4mm Aluminum Long Clamp Lock Servo Horn Blue 23T-JRAirtronicsKO

ProTek RC 4mm Aluminum Long Clamp Lock Servo Horn (Blue) (23T-JR/Airtronics/KO)

ProTek RC 4mm Aluminum Long Clamp Lock Servo Horn (Blue) (23T-JR/Airtronics/KO) - 25mm hole spacing and uses 3mm hardware to suit the geometry and hardware requirements of most vehicles. 75mm & 24. This is a protek r/c 4mm aluminum long clamp lock servo horn, and is intended for use with any servo that uses a 23 tooth spline output shaft. 25mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center) 4mm thick arm 35. Features clamp design 19. This horn features a clamp type design that grips the servo’s output shaft with enough force that even if the retainer screw comes loose, the horn will remain in place, increasing your chances of finishing the race additionally, the arm is 4mm thick for durability, has 19. 5mm overall length linkage holes threaded for 3mm hardware 23t jr/airtronics/ko spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. 75mm & 24.

 

Dorian Tool S-CTFP Round Shank Steel Clamp Lock Boring Bar Right Hand Cut 14 Overall Length 1-3364 Minimum Bore Diameter 1-14 Shank Diameter

Dorian Tool S-CTFP Round Shank Steel Clamp Lock Boring Bar, Right Hand Cut, 14″ Overall Length, 1-33/64″ Minimum Bore Diameter, 1-1/4″ Shank Diameter

Dorian Tool S-CTFP Round Shank Steel Clamp Lock Boring Bar, Right Hand Cut, 14″ Overall Length, 1-33/64″ Minimum Bore Diameter, 1-1/4″ Shank Diameter - Style f, 0 degree end cutting edge angle for positive triangle tpg 322 inserts. Right hand cut. Easier to index or change insert without the lock pin. Allows for an optional chipbreaker to be placed on the insert. Excellent locking ability.

 

Firepower 1423-1432 Locking PliersClamps

Firepower 1423-1432 Locking Pliers/Clamps

Firepower 1423-1432 Locking Pliers/Clamps - These 11-inch firepower 1423-1432 locking pliers/clamps are a combination of a c-clamp and locking pliers. . The c-clamp opening is adjustable with a screw in the handle and locks tight into position. Made from durable steel and resistant to rust and corrosion. Convenient trigger in the handle releases the lock.

 

Dorian Tool S-CTFP Round Shank Steel Clamp Lock Boring Bar Right Hand Cut 14 Overall Length 1-3364 Minimum Bore Diameter 1-14 Shank Diameter

Dorian Tool S-CTFP Round Shank Steel Clamp Lock Boring Bar, Right Hand Cut, 14″ Overall Length, 1-33/64″ Minimum Bore Diameter, 1-1/4″ Shank Diameter

Dorian Tool S-CTFP Round Shank Steel Clamp Lock Boring Bar, Right Hand Cut, 14″ Overall Length, 1-33/64″ Minimum Bore Diameter, 1-1/4″ Shank Diameter - Style f, 0 degree end cutting edge angle for positive triangle tpg 432 inserts. Easier to index or change insert without the lock pin. Excellent locking ability. Right hand cut. Allows for an optional chipbreaker to be placed on the insert.

 

Legrand-Pass Seymour PS620PACC20 20-Amp 250-volt Armored Clamp Lock Plug with Self Centering Cord Grip Heavy Duty Construction by Legrand-Pass Seymour

Legrand-Pass & Seymour PS620PACC20 20-Amp 250-volt Armored Clamp Lock Plug with Self Centering Cord Grip, Heavy Duty Construction by Legrand-Pass & Seymour

Legrand-Pass & Seymour PS620PACC20 20-Amp 250-volt Armored Clamp Lock Plug with Self Centering Cord Grip, Heavy Duty Construction by Legrand-Pass & Seymour - Legrand-pass & seymour ps615pacc20 15-amp 250-volt armored clamp lock plug with self centering cord grip, heavy duty construction. Style f, 0 degree end cutting edge angle for positive triangle tpg 322 inserts. Legrand-pass & seymour ps620pacc20 20-amp 250-volt armored clamp lock plug with self centering cord grip, heavy duty construction. Right hand cut. Legrand-pass & seymour ps615cacc20 15-amp 250-volt armored clamp lock connector with self centering cord grip, heavy duty construction.

 

TISCO - PART NOLN10-6 CLAMP LOCK NUT

TISCO – PART NO:LN10-6. CLAMP LOCK NUT

TISCO – PART NO:LN10-6. CLAMP LOCK NUT - Accessories and supplies 1″, 14 john deere 1″-14 thread, fits front wheel. Si number 814407 standard pack 1 weight 0. Part no ln106. 28. Tractors a, d, g, r, 50, 60, 70, 3010 & 4010. Weight (lb), 0. 28.

 

Milwaukee 14-46-1011 Quick Lock Clamp Kit for Reciprocating Saw

Milwaukee 14-46-1011 Quick Lock Clamp Kit for Reciprocating Saw

Milwaukee 14-46-1011 Quick Lock Clamp Kit for Reciprocating Saw - Part fits model number 6521-50. 5-inch long, 2-inch wide, and 2-inch high. This part contains seven parts. Quick lock clamp kit is used on reciprocating saw. Milwaukee 14-46-1011 quick lock clamp kit for reciprocating saw. Package weight of this item is 2-pound.

 

Spring Loaded Pull Handle Door Toggle Latch Catch Clamp Lock 90mm Long

Spring Loaded Pull Handle Door Toggle Latch Catch Clamp Lock 90mm Long

Spring Loaded Pull Handle Door Toggle Latch Catch Clamp Lock 90mm Long - Mounting hole dia 5mm/02″ weight 48g. Main color silver tone. Keeper fixing size 40 x 28 x 10mm/16″ x 11″ x 04″(lwh) handle latch size 65 x 25 x 15cm/ 26″ x 1″ x 06″(lwh). Material metal dimension 90 x 36 x 14mm/35″ x 14″ x 055″(lwt). Package content 1 x toggle latch product name toggle latch.

 

GHP Pack of 2 Anti-thef Wheel Lock Clamp Boot Tire Claw Auto Car

GHP Pack of 2 Anti-thef Wheel Lock Clamp Boot Tire Claw Auto Car

GHP Pack of 2 Anti-thef Wheel Lock Clamp Boot Tire Claw Auto Car - It is extremely durable,light-weight versatile and easy to use. Package included 2 x heavy duty wheel clamp lock 4 x keys. This heavy-duty lock clamp is a perfect anti-theft device that will completely immobilize a wheel from rotating or turning. Will fit most vehicles including cars, trucks, motorcycles, atv’s, rv’s, golf carts, small aircraft, boat trailer, scooters, go karts, lawn mowers, and more.