Kodiak Cutting Tools KCT133681 USA Made Solid Carbide Ball Nose End Mill, Coated, 4 Flute, 1/4″ Shank, 1/2″ Length of Cut, 2″ Overall Length, 1/4″ Diameter
- . 1/4 inch diameter solid carbide end mill, coated 1/4″ shank 1/2″ length of cut 2″ overall length 4 flute carbide, coated.
Melin Tool CCMGS-B Carbide Ball Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 4 Flutes, 2 Overall Length, 0.2500 Cutting Diameter, 0.25 Shank Diameter by Melin Tool
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systemsaluminum titanium nitride is similar to tialn but with a higher aluminum content for improved hardness and smoothnessround shanks allow use with a wide variety of toolholding systemsuse for radius and contouring part surfacesdesigned to cut materials ranging from nickel base alloy, stainless, tough alloys, abrasive and nonferrous.
Niagara Cutter N55466 Carbide Ball Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 2″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter
- Uncoated (bright) tools have no additional surface treatment or coating for general-purpose applications. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Ball nose end mills (also called ball end) create contoured surfaces.
SE CB1864DD Double Cut Carbide Burr (Shape D, Ball)
- Use this ball-shaped, double cut carbide burr for long-term performance and a smooth finish on your carving projects. Features of this product include • double cut • carbide head • ball shape d • head diameter 1/4” (6mm) • hss shank, diameter 1/8” • plastic storage case included important avoid getting counterfeit items. Se is a registered trademark protected by us trademark law. You will enjoy the quality, function and usefulness this double cut carbide burr (ball, d) has to offer. Genuine se products come with our se logo on the packaging. Se is committed to providing the customer with the best possible source for value.
Niagara Cutter N55620 Carbide Ball Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 3″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter
- Ball nose end mills (also called ball end) create contoured surfaces. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance, offering better heat resistance than tin and ticn coatings.
Niagara Cutter N89909 Carbide Ball Nose End Mill, Stub Length, TiAlN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 1.5″ Overall Length, 0.047″ Cut Diameter, 0.125″ Shank Diameter
- Double-end ball nose end mills create contoured surfaces and have cutting edges on both ends for longer tool life. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Stub length is used in applications with shallow depth of cut to increase the strength of the cutting edge and reduce the risk of breakage. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance, offering better heat resistance than tin and ticn coatings. Four flutes produce a better finish than fewer flutes.
BQLZR 1/13″ 2mm 2 Flutes Carbide Ball Nose End Mills CNC Bits 12mm Flute Length Pack of 5
- The bladed product is not use for people under 18 years. The item is only use for industrial cutting/engraving, not hazardous article package include 5 x ball nose end mills. Razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed£® 2. 175mm (1/8″) cutting edge length (flute length) 12mm total length 38mm number of flutes 2 a wide range of materials can be engraved, including copper, aluminum ,abs, acrylic, pvc, nylon, resin, majority of plastics weight 24g safety instructions 1. 3. Note the color of the item may vary slightly due to photography and your own computer specification wear-resistant and with special ball nose end design material solid carbide cutting diameter 2mm (1/13″) shank diameter 3.
Kodiak Cutting Tools KCT133219 USA Made Solid Premium Carbide Ball Nose End Mill, AlTiN Coated, 4 Flute, 1/8″ Shank, 1/4″ Length of Cut, 1-1/2″ Overall Length, 1/16″
- It is exceptional in difficult to machine materials where adhesive wear is particularly high. This coating is extremely heat resistant and can be used with or without coolant. 002″shank diameter tolerance -. 0001″/-. 000″/-. 0004″altin is a high performance coating for milling, tapping and drilling in stainless steels, carbon steels, alloy steels, titanium and cast iron. 1/16 inch diameter solid carbide end mill, coated 1/8″ shank 1/4″ length of cut 1-1/2″ overall length 4 flute carbide, altin coated diameter tolerance +.
Niagara Cutter N46454 Carbide Ball Nose End Mill, Metric, AlTiN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 39mm Overall Length, 1mm Cutting Diameter, 3.000mm Shank Diameter
- Ball nose end mills (also called ball end) create contoured surfaces. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Four flutes produce a better finish than fewer flutes. Aluminum titanium nitride (altin) coating lubricates the end mill for high-temperature stability and abrasion resistance, offering better heat resistance than tin, tialn, and ticn coatings. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
YG-1 E5062 Carbide Ball Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4″ Overall Length, 0.375″ Cutting Diameter, 0.375″ Shank Diameter
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills. Ball nose end mills (also called ball end) create contoured surfaces. Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Four flutes produce a better finish than fewer flutes.
Melin Tool AMG-M-M-B Carbide Ball Nose End Mill, Metric, AlTiN Monolayer Finish, 30 Deg Helix, 2 Flutes, 38mm Overall Length, 2.5mm Cutting Diameter, 3mm Shank Diameter
- 30 degree helix angle. Aluminum titanium nitride is similar to tialn but with a higher aluminum content for improved hardness and smoothness. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. For applications in steel and non-ferrous materials.
Precision Twist EB3304V Carbide Ball Nose End Mill, TiAlN Multilayer Finish, 30 Deg Helix, 4 Flutes, 2.5″ Overall Length, 1/4″ Cutting Diameter, 1/4″ Shank Diameter
- Four flutes produce a better finish than fewer flutes. Ball nose end mills (also called ball end) create contoured surfaces. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than tin and ticn coatings. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Suitable for machining steel, steel alloys, hardened steel, stainless steel, titanium, titanium alloys, nickel, and nickel alloys.
1/8″ 22mm Carbide Ball Nose End Mills CNC Router Bits Double Flute Spiral Set Tool Pack Of 10
- Ideal for 3d relief sculpturing, cutting, engraving, slotting, milling, etc. Shank diameter(sd) 3175mm(1/8″) approx cutting edge diameter (ced) 3175mm(1/8″) approx. Made with solid carbide, quantity 10 pcs (with plastic case). Cutting edge length (cel) 22mm(087in) approx. Suitable material nylon, resin, abs, acrylic, pvc, mdf, hardwood.
Niagara Cutter N59883 Carbide Ball Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 1.5″ Overall Length, 0.031″ Cutting Diameter, 0.125″ Shank Diameter
- Uncoated (bright) tools have no additional surface treatment or coating to retain miniature end mill’s tight tolerances. Ball nose end (also called ball end) creates contoured surfaces. Four flutes produce a better finish than fewer flutes. Miniature end mills create the intricate cuts needed for precision industries. Carbide can run at higher speeds than high-speed or cobalt steel, offering increased wear resistance and high cutting temperatures.
Niagara Cutter N56021 Carbide Ball Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 1.5″ Overall Length, 0.094″ Cutting Diameter, 0.125″ Shank Diameter
- Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance, offering better heat resistance than tin and ticn coatings. Ball nose end mills (also called ball end) create contoured surfaces. Four flutes produce a better finish than fewer flutes. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
Kodiak Cutting Tools L3-OFFT-21LF USA Made Micrograin Carbide Ball Nose End Mill Set, 4 Flute, 1/8″ to 1/2″ (Pack of 6)
- Fitted wood block stand included and each size comes in a marked plastic tube. Contains kodiak cutting tools brand premium quality usa made ball nose solid carbide end mills. Stub length end mills for extra rigidity. Contains 1pc of each diameter 1/8, 3/16, 1/4, 5/16, 3/8 and 1/2. 4 flute ball nose end mills are center cutting and made from premium sub-micrograin carbide.
1.0mm 4mm CEL 2 Flute Carbide Ball Nose End Mills Router Bit.
- Long length end mills have longer cutting edges and can make deeper cuts than standard length end mills. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials. Suitable for machining steel, hardened steel, steel alloys, stainless steel, cast iron, copper, brass, bronze, aluminum, and aluminum alloys. 10mm 4mm cel 2 flute carbide ball nose end mills router bit.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
