Coolest 25 Standard Fasteners

 

10-Pack 14 x 2-12 Hex Lag Screw Zinc Plated Steel Meets ASME B1821 Standards by Fastener Pro

(10-Pack) 1/4″ x 2-1/2″ Hex Lag Screw, Zinc Plated Steel, Meets ASME B18.2.1 Standards, by Fastener Pro

(10-Pack) 1/4″ x 2-1/2″ Hex Lag Screw, Zinc Plated Steel, Meets ASME B18.2.1 Standards, by Fastener Pro - Trusted & approved manufacturer. 1/4″, zinc plated steel, hex head lag screw. Quality tested, meets asme b1821 standards. Fastener pro, build with confidence. Easy to use & ready to install (best if used with pilot holes).

 

10-Pack 10-24 Keps Lock Nut Zinc Plated Steel with External Tooth Lockwasher Meets ASME B11 Class 2B Thread Standards by Fastener Pro

(10-Pack) #10-24 Keps Lock Nut, Zinc Plated Steel, with External Tooth Lockwasher, Meets ASME B1.1 Class 2B Thread Standards, by Fastener Pro

(10-Pack) #10-24 Keps Lock Nut, Zinc Plated Steel, with External Tooth Lockwasher, Meets ASME B1.1 Class 2B Thread Standards, by Fastener Pro - 130 • thickness min. 117 • washer diameter max. • Pre-assembled with a free spinning external tooth lock washer. Fastener pro #10-24 keps locknut zinc plated steel with external tooth lock washer (aka k-lock nut) • material steel • plating zinc • style with external tooth lockwasher • thread direction right hand • thread requirements asme b1. • External teeth pattern of the washer bite into both the nut and the base material to prevent loosening caused by vibration. 1 class 2b • thread density coarse • diameter #10 • thread count 24 • with across the flat max. 395 • wrench size 3/8″ • system of measurement imperial (inch) additional information about zinc plated keps lock nuts. • We continue to strive for 100% customer satisfaction on each transaction. 375 • with across the flat min. • Referred to as keps or k-lock nuts. Fastener pro build with confidence • your #1 source for quality fasteners through the fba program. 362 • thickness max. • Our fasteners are held to strict standards and are tested for quality. 406 • washer diameter min.

 

10-Pack 10-32 Keps Lock Nut Zinc Plated Steel with External Tooth Lockwasher Meets ASME B11 Class 2B Thread Standards by Fastener Pro

(10-Pack) #10-32 Keps Lock Nut, Zinc Plated Steel, with External Tooth Lockwasher, Meets ASME B1.1 Class 2B Thread Standards, by Fastener Pro

(10-Pack) #10-32 Keps Lock Nut, Zinc Plated Steel, with External Tooth Lockwasher, Meets ASME B1.1 Class 2B Thread Standards, by Fastener Pro - 362 • thickness max. • Referred to as keps or k-lock nuts. 1 class 2b • thread density fine • diameter #10 • thread count 32 • with across the flat max. 406 • washer diameter min. 395 • wrench size 3/8″ • system of measurement imperial (inch) additional information about zinc plated keps lock nuts. Fastener pro #10-32 keps locknut zinc plated steel with external tooth lock washer (aka k-lock nut) • material steel • plating zinc • style with external tooth lockwasher • thread direction right hand • thread requirements asme b1. 375 • with across the flat min. • External teeth pattern of the washer bite into both the nut and the base material to prevent loosening caused by vibration. Fastener pro build with confidence • your #1 source for quality fasteners through the fba program. 130 • thickness min. • Our fasteners are held to strict standards and are tested for quality. • Pre-assembled with a free spinning external tooth lock washer. • We continue to strive for 100% customer satisfaction on each transaction. 117 • washer diameter max.

 

10-Pack 6 x 1 Hex Washer Head Self Drilling Screws Zinc Plated Steel Sheet Metal Screws Meets ASME B1863IFI-113 Standards by Fastener Pro

(10-Pack) #6 x 1″ Hex Washer Head Self Drilling Screws, Zinc Plated Steel Sheet Metal Screws, Meets ASME B18.6.3/IFI-113 Standards, by Fastener Pro

(10-Pack) #6 x 1″ Hex Washer Head Self Drilling Screws, Zinc Plated Steel Sheet Metal Screws, Meets ASME B18.6.3/IFI-113 Standards, by Fastener Pro - 302″ • head height max 0. 025″ • washer thickness min 0. 328″ • head diameter min 0. 015″ • width across the flats 1/4″ • threads per inch 20 additional information about zinc plated hex tek screws • important note use these zinc plated steel hex tek self-drilling screws on light gauge metals only. • We continue to strive for 100% customer satisfaction on each transaction. 118″ • head height min 0. • Also known as self tapping screws or self drilling bolts, they cut or form threads to engage with the mating material. 6. • Self-drilling tek screws have a special pointed end style that allows them to penetrate thin materials without a starting or pilot hole. 3, ifi-113 • point type self drilling • head style hex washer • drive type external hex • material steel • plating zinc • diameter #6 • length 1″ • head diameter max 0. Fastener pro #6 x 1″ self drilling hex tek screw • dimensional standard asme b18. • Self drilling screws are also known as tek screws. Fastener pro build with confidence • your #1 source for quality fasteners through the fba program. 095″ • washer thickness max 0. • Our fasteners are held to strict standards and are tested for quality.

 

10-Pack 6-32 Nylon Insert Lock Nut Zinc Plated Steel Meets ASME B11 Class 2B ASME B18166 Standards by Fastener Pro

(10-Pack) #6-32 Nylon Insert Lock Nut, Zinc Plated Steel, Meets ASME B1.1 Class 2B/ ASME B18.16.6 Standards, by Fastener Pro

(10-Pack) #6-32 Nylon Insert Lock Nut, Zinc Plated Steel, Meets ASME B1.1 Class 2B/ ASME B18.16.6 Standards, by Fastener Pro - â€¢ Our fasteners are held to strict standards and are tested for quality. Fastener pro build with confidence • your #1 source for quality fasteners through the fba program. Fastener pro #6-32 nylon insert locknut zinc plated steel (aka elastic stop nut) • material steel • plating zinc • dimensional standard asme b18. • important note the nylon insert can absorb moisture in wet environments, which can cause the insert to become brittle over time. 305 • thickness max. • Nylon insert lock nuts grips threads to help prevent loosening. 103 • wrench size 5/16″ • system of measurement imperial (inch) • series nm additional information about zinc plated nylon insert lock nuts. • Also known as an elastic stop nut. 188 • thickness min. 313 • with across the flat min. 168 • hex height min. 6 • thread requirements asme b1. • We continue to strive for 100% customer satisfaction on each transaction. • The nylon insert helps prevent loosening when nut is threaded to another component. 16. 1 class 2b • thread direction right hand • thread density coarse • diameter #6 • thread count 32 • with across the flat max.

 

10-Pack 14-20 Nylon Insert Lock Nut Zinc Plated Steel Meets ASME B11 Class 2B ASME B18166 Standards by Fastener Pro

(10-Pack) 1/4-20 Nylon Insert Lock Nut, Zinc Plated Steel, Meets ASME B1.1 Class 2B/ ASME B18.16.6 Standards, by Fastener Pro

(10-Pack) 1/4-20 Nylon Insert Lock Nut, Zinc Plated Steel, Meets ASME B1.1 Class 2B/ ASME B18.16.6 Standards, by Fastener Pro - â€¢ we continue to strive for 100% customer satisfaction on each transaction. • The nylon insert helps prevent loosening when nut is threaded to another component. • Also known as an elastic stop nut. 225 • wrench size 7/16″ • system of measurement imperial (inch) • series ne additional information about zinc plated nylon insert lock nuts. 6 • thread requirements asme b1. • Nylon insert lock nuts grips threads to help prevent loosening. 1 class 2b • thread direction right hand • thread density coarse • diameter 1/4″ • thread count 20 • with across the flat max. Fastener pro 1/4-20 nylon insert locknut zinc plated steel (aka elastic stop nut) • material steel • plating zinc • dimensional standard asme b18. 439 • with across the flat min. 430 • thickness max. 16. Fastener pro build with confidence • your #1 source for quality fasteners through the fba program. 328 • thickness min. • Our fasteners are held to strict standards and are tested for quality. • Important note the nylon insert can absorb moisture in wet environments, which can cause the insert to become brittle over time. 298 • hex height min.

 

Knape Vogt 153 Standard fastener floor mount steel anochrome Knape Vogt 153 Standard fastener floor mount steel anochrome

Knape & Vogt, 153, Standard fastener, floor mount, steel, anochrome, Knape & Vogt, 153, Standard fastener, floor mount, steel, anochrome

Knape & Vogt, 153, Standard fastener, floor mount, steel, anochrome, Knape & Vogt, 153, Standard fastener, floor mount, steel, anochrome - Fastener pro, build with confidence. Trusted & approved manufacturer. Easy to use & ready to install. Meets asme b11 class 2b / asme b18166 standards. Packed in quantity of 100 pcs.

 

516-18 x 34 Hex Bolt Black Oxide Steel Meets ASME B1821 Standards by Fastener Pro 25-Pack

5/16-18 x 3/4″ Hex Bolt, Black Oxide, Steel, Meets ASME B18.2.1 Standards, by Fastener Pro (25-Pack)

5/16-18 x 3/4″ Hex Bolt, Black Oxide, Steel, Meets ASME B18.2.1 Standards, by Fastener Pro (25-Pack) - â€¢ We continue to strive for 100% customer satisfaction on each transaction. 557 • rohs compliant • wrench size 1/2″ fastener pro build with confidence • your #1 source for quality fasteners through the fba program. Fastener pro 5/16-18 x 3/4″ hex bolt, black oxide, steel • material steel • finish black oxide (oil finish) • thread direction right hand • thread density coarse • diameter 5/16″ • thread count 18 • length 3/4″ • head style hex • head height max 0. • Our fasteners are held to strict standards and are tested for quality. 3065 • width across flats max 0. 500 • width across flats min 0. 577 • width across corners min 0. 489 • width across corners max 0. 211 • head height min 0. 3125 • body diameter min 0. 195 • body diameter max 0.

 

175 Count Ipe Clip Standard Fastener System - PATINA GREY Round Clips with 8 x 2 316 Grade Stainless T10 - Star Drive Screws

(175 Count) Ipe Clip Standard Fastener System – PATINA GREY Round Clips with #8 x 2″, 316 Grade Stainless T10 – Star Drive Screws

(175 Count) Ipe Clip Standard Fastener System – PATINA GREY Round Clips with #8 x 2″, 316 Grade Stainless T10 – Star Drive Screws - Same jaw fixing system across all nova chuck models, total system interchangeability. 2-year warranty. Optimum step sizes are 165-inch , 2-inch and 25-inch. Ideal for gripping in the contraction mode. 3 step sizes for optimum gripping of footed bowls with minimal crush damage to wood.

 

10-Pack 12 x 1 Hex Washer Head Self Drilling Tek Screw Zinc Plated Steel Meets ASME B1863IFI-113 Standards by Fastener Pro

(10-Pack) #12 x 1″ Hex Washer Head Self Drilling Tek Screw, Zinc Plated Steel, Meets ASME B18.6.3/IFI-113 Standards, by Fastener Pro

(10-Pack) #12 x 1″ Hex Washer Head Self Drilling Tek Screw, Zinc Plated Steel, Meets ASME B18.6.3/IFI-113 Standards, by Fastener Pro - 161″ • washer thickness max 0. 194″ • head height min 0. 432″ • head diameter min 0. 6. 039″ • washer thickness min 0. 3, ifi-113 • point type self drilling • head style hex washer • drive type external hex • material steel • plating zinc • diameter #12 • length 1″ • head diameter max 0. Fastener pro #12 x 1″ self drilling hex tek screw • dimensional standard asme b18. 398″ • head height max 0. • We continue to strive for 100% customer satisfaction on each transaction. • Our fasteners are held to strict standards and are tested for quality. 022″ • width across the flats 5/16″ fastener pro build with confidence • your #1 source for quality fasteners through the fba program.

 

10-Pack 10-24 Nylon Insert Lock Nut Zinc Plated Steel Meets ASME B11 Class 2B ASME B18166 Standards by Fastener Pro

(10-Pack) #10-24 Nylon Insert Lock Nut, Zinc Plated Steel, Meets ASME B1.1 Class 2B/ ASME B18.16.6 Standards, by Fastener Pro

(10-Pack) #10-24 Nylon Insert Lock Nut, Zinc Plated Steel, Meets ASME B1.1 Class 2B/ ASME B18.16.6 Standards, by Fastener Pro - 229 • hex height min. Fastener pro #10-24 nylon insert locknut zinc plated steel (aka elastic stop nut) • material steel • plating zinc • dimensional standard asme b18. 6 • thread requirements asme b1. 1 class 2b • thread direction right hand • thread density coarse • diameter #10 • thread count 24 • with across the flat max. • We continue to strive for 100% customer satisfaction on each transaction. • Our fasteners are held to strict standards and are tested for quality. 140 • wrench size 3/8″ • system of measurement imperial (inch) • series nm additional information about zinc plated nylon insert lock nuts. 376 • with across the flat min. 249 • thickness min. • Important note the nylon insert can absorb moisture in wet environments, which can cause the insert to become brittle over time. • Nylon insert lock nuts grips threads to help prevent loosening. • The nylon insert helps prevent loosening when nut is threaded to another component. Fastener pro build with confidence • your #1 source for quality fasteners through the fba program. • Also known as an elastic stop nut. 16. 367 • thickness max.

 

Pro Pack of 20Pcs 153 Series Standard Fasteners Standard Fastener-Floor Mount Anochrome

Pro Pack of 20Pcs, 153 Series Standard Fasteners, Standard Fastener-Floor Mount, Anochrome

Pro Pack of 20Pcs, 153 Series Standard Fasteners, Standard Fastener-Floor Mount, Anochrome - 1 each. Description standard fastener-floor mount. Finish anochrome.

 

Fastener Screw Bolt Nut Thread Measure Gauge Size Checker Standard Metric

Fastener Screw Bolt Nut Thread Measure Gauge Size Checker Standard & Metric

Fastener Screw Bolt Nut Thread Measure Gauge Size Checker Standard & Metric - Reliable and accurate sturdy and lightweight plastic. Ruler marked with inches and millimeters for worldwide use resists water, alcohol, oil, and grease. Measure us and metric thread pitch special notch gauges flat headed metal and wood screws. Gauges hex nuts and washers (uss, sae) gauges metric hex nuts and washers by holding under metric holes. Excellent for sizing bolts, screws, nuts (uss, sae, and metric) and twist drills size bolt diameter by pushing bolt through sizing holes.

 

15-Pack 14 x 1 Hex Lag Screw Zinc Plated Steel Meets ASME B1821 Standards by Fastener Pro

(15-Pack) 1/4″ x 1″ Hex Lag Screw, Zinc Plated Steel, Meets ASME B18.2.1 Standards, by Fastener Pro

(15-Pack) 1/4″ x 1″ Hex Lag Screw, Zinc Plated Steel, Meets ASME B18.2.1 Standards, by Fastener Pro - Easy to use & ready to install (best if used with pilot holes). 1/4″, zinc plated steel, hex head lag screw. Fastener pro, build with confidence. Trusted & approved manufacturer. Quality tested, meets asme b1821 standards.

 

10-Pack 8 x 1 Hex Washer Head Self Drilling Tek Screw Zinc Plated Steel Meets ASME B1863IFI-113 Standards by Fastener Pro

(10-Pack) #8 x 1″ Hex Washer Head Self Drilling Tek Screw, Zinc Plated Steel, Meets ASME B18.6.3/IFI-113 Standards, by Fastener Pro

(10-Pack) #8 x 1″ Hex Washer Head Self Drilling Tek Screw, Zinc Plated Steel, Meets ASME B18.6.3/IFI-113 Standards, by Fastener Pro - 031″ • washer thickness min 0. • Our fasteners are held to strict standards and are tested for quality. 348″ • head diameter min 0. 141″ • head height min 0. Fastener pro #8 x 1″ self drilling hex tek screw • point type self drilling • head style hex washer • drive type external hex • material steel • plating zinc • diameter #8 • length 1″ • head diameter max 0. 115″ • washer thickness max 0. 019″ • width across the flats 1/4″ fastener pro build with confidence • your #1 source for quality fasteners through the fba program. 322″ • head height max 0. • We continue to strive for 100% customer satisfaction on each transaction.

 

14-20 x 12 Hex Bolt Black Oxide Steel Meets ASME B1821 Standards by Fastener Pro 50-Pack

1/4-20 x 1/2″ Hex Bolt, Black Oxide, Steel, Meets ASME B18.2.1 Standards, by Fastener Pro (50-Pack)

1/4-20 x 1/2″ Hex Bolt, Black Oxide, Steel, Meets ASME B18.2.1 Standards, by Fastener Pro (50-Pack) - 163 • head height min 0. • Our fasteners are held to strict standards and are tested for quality. 488 • rohs compliant • wrench size 7/16″ fastener pro build with confidence • your #1 source for quality fasteners through the fba program. 250 • body diameter min 0. 428 • width across corners max 0. 245 • width across flats max 0. • We continue to strive for 100% customer satisfaction on each transaction. 150 • body diameter max 0. . 505 • width across corners min 0. 438 • width across flats min 0. Fastener pro 1/4-20 x 1/2″ hex bolt, black oxide, steel • material steel • finish black oxide (oil finish) • thread direction right hand • thread density coarse • diameter 1/4″ • thread count 20 • length 1/2″ • head style hex • head height max 0.

 

25-Pack 6-32 Nylon Insert Lock Nut Zinc Plated Steel Meets ASME B11 Class 2B ASME B18166 Standards by Fastener Pro

(25-Pack) #6-32 Nylon Insert Lock Nut, Zinc Plated Steel, Meets ASME B1.1 Class 2B/ ASME B18.16.6 Standards, by Fastener Pro

(25-Pack) #6-32 Nylon Insert Lock Nut, Zinc Plated Steel, Meets ASME B1.1 Class 2B/ ASME B18.16.6 Standards, by Fastener Pro - 6 • thread requirements asme b1. • The nylon insert helps prevent loosening when nut is threaded to another component. • Important note the nylon insert can absorb moisture in wet environments, which can cause the insert to become brittle over time. 103 • wrench size 5/16″ • system of measurement imperial (inch) • series nm additional information about zinc plated nylon insert lock nuts. 1 class 2b • thread direction right hand • thread density coarse • diameter #6 • thread count 32 • with across the flat max. • Our fasteners are held to strict standards and are tested for quality. • Also known as an elastic stop nut. Fastener pro build with confidence • your #1 source for quality fasteners through the fba program. 305 • thickness max. 188 • thickness min. 168 • hex height min. 16. Fastener pro #6-32 nylon insert locknut zinc plated steel (aka elastic stop nut) • material steel • plating zinc • dimensional standard asme b18. • Nylon insert lock nuts grips threads to help prevent loosening. 313 • with across the flat min. • We continue to strive for 100% customer satisfaction on each transaction.

 

10-Pack 6-32 Keps Lock Nut Zinc Plated Steel with External Tooth Lockwasher Meets ASME B11 Class 2B Thread Standards by Fastener Pro

(10-Pack) #6-32 Keps Lock Nut, Zinc Plated Steel, with External Tooth Lockwasher, Meets ASME B1.1 Class 2B Thread Standards, by Fastener Pro

(10-Pack) #6-32 Keps Lock Nut, Zinc Plated Steel, with External Tooth Lockwasher, Meets ASME B1.1 Class 2B Thread Standards, by Fastener Pro - â€¢ External teeth pattern of the washer bite into both the nut and the base material to prevent loosening caused by vibration. • Our fasteners are held to strict standards and are tested for quality. • We continue to strive for 100% customer satisfaction on each transaction. Fastener pro build with confidence • your #1 source for quality fasteners through the fba program. 312 • with across the flat min. • Referred to as keps or k-lock nuts. 102 • washer diameter max. 302 • thickness max. 1 class 2b • thread density coarse • diameter #6 • thread count 32 • with across the flat max. 114 • thickness min. 348 • washer diameter min. 338 • wrench size 5/16″ • system of measurement imperial (inch) additional information about zinc plated keps lock nuts. Fastener pro #6-32 keps locknut zinc plated steel with external tooth lock washer (aka k-lock nut) • material steel • plating zinc • style with external tooth lockwasher • thread direction right hand • thread requirements asme b1. • Pre-assembled with a free spinning external tooth lock washer.

 

10-Pack 8-32 Nylon Insert Lock Nut Zinc Plated Steel Meets ASME B11 Class 2B ASME B18166 Standards by Fastener Pro

(10-Pack) #8-32 Nylon Insert Lock Nut, Zinc Plated Steel, Meets ASME B1.1 Class 2B/ ASME B18.16.6 Standards, by Fastener Pro

(10-Pack) #8-32 Nylon Insert Lock Nut, Zinc Plated Steel, Meets ASME B1.1 Class 2B/ ASME B18.16.6 Standards, by Fastener Pro - 336 • thickness max. 6 • thread requirements asme b1. 16. • Our fasteners are held to strict standards and are tested for quality. • The nylon insert helps prevent loosening when nut is threaded to another component. • Also known as an elastic stop nut. • Important note the nylon insert can absorb moisture in wet environments, which can cause the insert to become brittle over time. 1 class 2b • thread direction right hand • thread density coarse • diameter #8 • thread count 32 • with across the flat max. 239 • thickness min. Fastener pro #8-32 nylon insert locknut zinc plated steel (aka elastic stop nut) • material steel • plating zinc • dimensional standard asme b18. • We continue to strive for 100% customer satisfaction on each transaction. • Nylon insert lock nuts grips threads to help prevent loosening. 345 • with across the flat min. 140 • wrench size 11/32″ • system of measurement imperial (inch) • series nm additional information about zinc plated nylon insert lock nuts. Fastener pro build with confidence • your #1 source for quality fasteners through the fba program. 219 • hex height min.

 

516-18 x 1 Hex Bolt Black Oxide Steel Meets ASME B1821 Standards by Fastener Pro 25-Pack

5/16-18 x 1″ Hex Bolt, Black Oxide, Steel, Meets ASME B18.2.1 Standards, by Fastener Pro (25-Pack)

5/16-18 x 1″ Hex Bolt, Black Oxide, Steel, Meets ASME B18.2.1 Standards, by Fastener Pro (25-Pack) - 500 • width across flats min 0. 3065 • width across flats max 0. 195 • body diameter max 0. 3125 • body diameter min 0. 489 • width across corners max 0. 557 • rohs compliant • wrench size 1/2″ fastener pro build with confidence • your #1 source for quality fasteners through the fba program. • Our fasteners are held to strict standards and are tested for quality. • We continue to strive for 100% customer satisfaction on each transaction. 577 • width across corners min 0. 211 • head height min 0. Fastener pro 5/16-18 x 1″ hex bolt, black oxide, steel • material steel • finish black oxide (oil finish) • thread direction right hand • thread density coarse • diameter 5/16″ • thread count 18 • length 1″ • head style hex • head height max 0.

 

10-Pack 8-32 Keps Lock Nut Zinc Plated Steel with External Tooth Lockwasher Meets ASME B11 Class 2B Thread Standards by Fastener Pro

(10-Pack) #8-32 Keps Lock Nut, Zinc Plated Steel, with External Tooth Lockwasher, Meets ASME B1.1 Class 2B Thread Standards, by Fastener Pro

(10-Pack) #8-32 Keps Lock Nut, Zinc Plated Steel, with External Tooth Lockwasher, Meets ASME B1.1 Class 2B Thread Standards, by Fastener Pro - Fastener pro build with confidence • your #1 source for quality fasteners through the fba program. • Referred to as keps or k-lock nuts. • Pre-assembled with a free spinning external tooth lock washer. 130 • thickness min. 117 • washer diameter max. . Fastener pro #8-32 keps locknut zinc plated steel with external tooth lock washer (aka k-lock nut) • material steel • plating zinc • style with external tooth lockwasher • thread direction right hand • thread requirements asme b1. • Our fasteners are held to strict standards and are tested for quality. 344 • with across the flat min. 381 • washer diameter min. 370 • wrench size 11/32″ • system of measurement imperial (inch) additional information about zinc plated keps lock nuts. • We continue to strive for 100% customer satisfaction on each transaction. 332 • thickness max. • External teeth pattern of the washer bite into both the nut and the base material to prevent loosening caused by vibration. 1 class 2b • thread density coarse • diameter #8 • thread count 32 • with across the flat max.

 

100 Count Ipe Clip Standard Fastener System - BLACK Round Clips with 8 x 2 316 Grade Stainless T10 - Star Drive Screws

(100 Count) Ipe Clip Standard Fastener System – BLACK Round Clips with #8 x 2″, 316 Grade Stainless T10 – Star Drive Screws

(100 Count) Ipe Clip Standard Fastener System – BLACK Round Clips with #8 x 2″, 316 Grade Stainless T10 – Star Drive Screws - Ideal for gripping in the contraction mode. 2-year warranty. Same jaw fixing system across all nova chuck models, total system interchangeability. Optimum step sizes are 165-inch , 2-inch and 25-inch. 3 step sizes for optimum gripping of footed bowls with minimal crush damage to wood.

 

10-Pack 14-20 Keps Lock Nut Zinc Plated Steel with External Tooth Lockwasher Meets ASME B11 Class 2B Thread Standards by Fastener Pro

(10-Pack) 1/4-20 Keps Lock Nut, Zinc Plated Steel, with External Tooth Lockwasher, Meets ASME B1.1 Class 2B Thread Standards, by Fastener Pro

(10-Pack) 1/4-20 Keps Lock Nut, Zinc Plated Steel, with External Tooth Lockwasher, Meets ASME B1.1 Class 2B Thread Standards, by Fastener Pro - 1 class 2b • thread density fine • diameter 1/4″ • thread count 20 • with across the flat max. 494 • wrench size 7/16″ • system of measurement imperial (inch) additional information about zinc plated keps lock nuts. • Referred to as keps or k-lock nuts. • We continue to strive for 100% customer satisfaction on each transaction. 193 • thickness min. 423 • thickness max. • External teeth pattern of the washer bite into both the nut and the base material to prevent loosening caused by vibration. Fastener pro build with confidence • your #1 source for quality fasteners through the fba program. • our fasteners are held to strict standards and are tested for quality. 178 • washer diameter max. 506 • washer diameter min. • Pre-assembled with a free spinning external tooth lock washer. Fastener pro 1/4-20 keps locknut zinc plated steel with external tooth lock washer (aka k-lock nut) • material steel • plating zinc • style with external tooth lockwasher • thread direction right hand • thread requirements asme b1. 438 • with across the flat min.

 

175 Count Ipe Clip Standard Fastener System - BROWN Round Clips with 8 x 2 316 Grade Stainless T10 - Star Drive Screws

(175 Count) Ipe Clip Standard Fastener System – BROWN Round Clips with #8 x 2″, 316 Grade Stainless T10 – Star Drive Screws

(175 Count) Ipe Clip Standard Fastener System – BROWN Round Clips with #8 x 2″, 316 Grade Stainless T10 – Star Drive Screws - Optimum step sizes are 165-inch , 2-inch and 25-inch. 2-year warranty. 3 step sizes for optimum gripping of footed bowls with minimal crush damage to wood. Ideal for gripping in the contraction mode. Same jaw fixing system across all nova chuck models, total system interchangeability.

 

Pro Pack of 10Pcs 153 Series Standard Fasteners Standard Fastener-Floor Mount Anochrome

Pro Pack of 10Pcs, 153 Series Standard Fasteners, Standard Fastener-Floor Mount, Anochrome

Pro Pack of 10Pcs, 153 Series Standard Fasteners, Standard Fastener-Floor Mount, Anochrome - 1 each. Description standard fastener-floor mount. Finish anochrome.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.