Coolest 25 Fractional Drill Bits in 2020

 

Viking Type 240 general purpose Black Oxide surface finish jobber length 118º point fractional drill bits #ad

Viking Type 240 general purpose, Black Oxide surface finish, jobber length 118º point fractional drill bits

Viking Type 240 general purpose, Black Oxide surface finish, jobber length 118º point fractional drill bits #ad - Designed for a wide range of operating conditions and materials. Widely used in general purpose applications. Black oxide finish increases wear resistance and adds lubricity to improve chip flow. Fractional. Made in the usa.

 

Black Gold HSS Fractional Drill Bits - 532 black gold hss drill bit 135 deg Set of 12 #ad

Black & Gold HSS Fractional Drill Bits – 5/32″ black & gold hss drill bit 135 deg [Set of 12]

Black & Gold HSS Fractional Drill Bits – 5/32″ black & gold hss drill bit 135 deg [Set of 12] #ad - -Split point begins drilling immediately, minimizing bit ”walk”. 585-3019010b features -accurate drilling without center punch. Number of bits -1. 02 pounds. -Laser-etched markings for easy identification. -High speed steel features a black shank and gold flute. Dimensions overall product weight -0.

 

HSS Fractional Drill Bit #ad

HSS Fractional Drill Bit

HSS Fractional Drill Bit #ad - Straight shank. Constructed of m-2 high speed steel for the best combination of strength, heat resistance, and wear resistance. High speed steel. Bright finish. Standard 118 degree point for general use in metal, wood and plastic.

 

Bosch BL2175 34 In x 6 In Fractional Reduced Shank Black Oxide Drill Bit #ad

Bosch BL2175 3/4 In. x 6 In. Fractional Reduced Shank Black Oxide Drill Bit

Bosch BL2175 3/4 In. x 6 In. Fractional Reduced Shank Black Oxide Drill Bit #ad - For use in steel, copper, aluminum, brass, oak, maple, mdf, pine, pvc, polycarbonate, acrylic, abs, nylon and composite materials. Speed helix design for three times faster drilling than standard bits. Available in jobber length, stubby length, extended length (aircraft), 1/2 in reduced shank (silver and deming). Easier drilling, reduced heat and extended drill bit life. Last 50 percent longer than high-speed steel.

 

Black Gold HSS Fractional Drill Bits - 2364 black gold hssdrill bit 135 deg Set of 6 #ad

Black & Gold HSS Fractional Drill Bits – 23/64″ black & gold hssdrill bit 135 deg [Set of 6]

Black & Gold HSS Fractional Drill Bits – 23/64″ black & gold hssdrill bit 135 deg [Set of 6] #ad - Dimensions overall product weight -0. 1 pounds. Number of bits -1. -split point begins drilling immediately, minimizing bit ”walk”. -High speed steel features a black shank and gold flute. 585-3019023b features -accurate drilling without center punch. -Laser-etched markings for easy identification.

 

HSS Fractional Drill Bit #ad

HSS Fractional Drill Bit

HSS Fractional Drill Bit #ad - Flute length 4-1/16″. Overall length 5-1/16″. Finish bright. Drill bit size 7/16″. Recommended for use in metal, wood & plastic.

 

HSS Fractional Drill Bit #ad

HSS Fractional Drill Bit

HSS Fractional Drill Bit #ad - Bright finish. Straight shank. Standard 118 degree point for general use in metal, wood and plastic. High speed steel. Constructed of m-2 high speed steel for the best combination of strength, heat resistance, and wear resistance.

 

Walter 01H032 SST 135 Deg Stub Fractional Drill Bit - 12 in Jobbers Bit with 2 in Cutting Length Twist Drill Bit for Steel Stainless Steel Non Ferrous Alloys Power Drilling Accessories #ad

Walter 01H032 SST+ 135 Deg. Stub, Fractional Drill Bit – 1/2 in. Jobbers Bit with 2 in. Cutting Length, Twist Drill Bit for Steel, Stainless Steel, Non Ferrous Alloys. Power Drilling Accessories

Walter 01H032 SST+ 135 Deg. Stub, Fractional Drill Bit – 1/2 in. Jobbers Bit with 2 in. Cutting Length, Twist Drill Bit for Steel, Stainless Steel, Non Ferrous Alloys. Power Drilling Accessories #ad - Applications the fractional bit is widely used with stationary machines for drilling into sheet metal, and thin-walled materials you can also use this drilling bit on steel, stainless steel, and other non-ferrous alloys. Specifications the metal drilling bit has a flute size of 2 in and drill size of 1/2 in the overall length of this twist drill bit is 4 in smaller diameter bits can be operated at high speeds and large ones are recommended to be used at low speed. Innovative design power drilling bit is designed to have a short length, which provides maximum resistance to breakage and allows for drilling in confined areas and round surfaces the high-power fractional bit can drill more holes in lesser time. Durable construction sst+ fractional bit is made using a cobalt blend for superior performance on hard materials and for enhanced longevity the short flute design provides maximum rigidity when drilling in sheet metals. Self-centering drill bit sst+ drill bit features a split point of 135 deg for fast and effective drilling without center punching the special self-centering point ensures minimal burrs.

 

Viking Type 240 general purpose Black Oxide surface finish jobber length 118º point fractional drill bits #ad

Viking Type 240 general purpose, Black Oxide surface finish, jobber length 118º point fractional drill bits

Viking Type 240 general purpose, Black Oxide surface finish, jobber length 118º point fractional drill bits #ad - Black oxide finish increases wear resistance and adds lubricity to improve chip flow. Fractional. Designed for a wide range of operating conditions and materials. Made in the usa. Widely used in general purpose applications.

 

Viking Type 240 general purpose Black Oxide surface finish jobber length 118º point fractional drill bits #ad

Viking Type 240 general purpose, Black Oxide surface finish, jobber length 118º point fractional drill bits

Viking Type 240 general purpose, Black Oxide surface finish, jobber length 118º point fractional drill bits #ad - Designed for a wide range of operating conditions and materials. Widely used in general purpose applications. Black oxide finish increases wear resistance and adds lubricity to improve chip flow. Made in the usa. Fractional.

 

HSS Fractional Drill Bit #ad

HSS Fractional Drill Bit

HSS Fractional Drill Bit #ad - Jobber length. High speed steel bits used for general purpose drilling in wood, metal and plastic.

 

HSS Fractional Drill Bit #ad

HSS Fractional Drill Bit

HSS Fractional Drill Bit #ad - Standard 118 degree point for use in wood, metal, and plastic. Constructed of m-1 high speed steel for best combo of strength, heat and wear resistance.

 

Viking Type 240 general purpose Black Oxide surface finish jobber length 118º point fractional drill bits #ad

Viking Type 240 general purpose, Black Oxide surface finish, jobber length 118º point fractional drill bits

Viking Type 240 general purpose, Black Oxide surface finish, jobber length 118º point fractional drill bits #ad - Designed for a wide range of operating conditions and materials. Made in the usa. Widely used in general purpose applications. Fractional. Black oxide finish increases wear resistance and adds lubricity to improve chip flow.

 

Black Gold HSS Fractional Drill Bits - 1364 black gold hssdrill bit 135 deg Set of 12 #ad

Black & Gold HSS Fractional Drill Bits – 13/64″ black & gold hssdrill bit 135 deg [Set of 12]

Black & Gold HSS Fractional Drill Bits – 13/64″ black & gold hssdrill bit 135 deg [Set of 12] #ad - -Split point begins drilling immediately, minimizing bit ”walk”. -Laser-etched markings for easy identification. 585-3019013b features -accurate drilling without center punch. 02 pounds. -High speed steel features a black shank and gold flute. Dimensions overall product weight -0. Number of bits -1.

 

HSS Fractional Drill Bit #ad

HSS Fractional Drill Bit

HSS Fractional Drill Bit #ad - Standard 118 degree point for use in wood metal and plastic. Constructed of m-2 high speed steel for the best combination of strength heat resistance and wear re.

 

Viking Type 240 general purpose Black Oxide surface finish jobber length 118º point fractional drill bits #ad

Viking Type 240 general purpose, Black Oxide surface finish, jobber length 118º point fractional drill bits

Viking Type 240 general purpose, Black Oxide surface finish, jobber length 118º point fractional drill bits #ad - Designed for a wide range of operating conditions and materials. Widely used in general purpose applications. Made in the usa. Black oxide finish increases wear resistance and adds lubricity to improve chip flow. Fractional.

 

Viking Type 240 general purpose Black Oxide surface finish jobber length 118º point fractional drill bits #ad

Viking Type 240 general purpose, Black Oxide surface finish, jobber length 118º point fractional drill bits

Viking Type 240 general purpose, Black Oxide surface finish, jobber length 118º point fractional drill bits #ad - Made in the usa. Widely used in general purpose applications. Fractional. Black oxide finish increases wear resistance and adds lubricity to improve chip flow. Designed for a wide range of operating conditions and materials.

 

Black Gold HSS Fractional Drill Bits - black gold 316 hss drill bit 135 deg Set of 12 #ad

Black & Gold HSS Fractional Drill Bits – black & gold 3/16″ hss drill bit 135 deg [Set of 12]

Black & Gold HSS Fractional Drill Bits – black & gold 3/16″ hss drill bit 135 deg [Set of 12] #ad - -laser-etched markings for easy identification. Number of bits -1. 02 pounds. Dimensions overall product weight -0. -Split point begins drilling immediately, minimizing bit ”walk”. -High speed steel features a black shank and gold flute. 585-3019012b features -accurate drilling without center punch.

 

Black Gold HSS Fractional Drill Bits - 332 black gold hss drill bit 135 deg Set of 12 #ad

Black & Gold HSS Fractional Drill Bits – 3/32″ black & gold hss drill bit 135 deg [Set of 12]

Black & Gold HSS Fractional Drill Bits – 3/32″ black & gold hss drill bit 135 deg [Set of 12] #ad - Number of bits -1. 585-3019006b features -accurate drilling without center punch. -Split point begins drilling immediately, minimizing bit ”walk”. -High speed steel features a black shank and gold flute. 01 pounds. Dimensions overall product weight -0. -Laser-etched markings for easy identification.

 

Black Gold HSS Fractional Drill Bits - 18 black gold hss drill bit 135 deg Set of 12 #ad

Black & Gold HSS Fractional Drill Bits – 1/8″ black & gold hss drill bit 135 deg [Set of 12]

Black & Gold HSS Fractional Drill Bits – 1/8″ black & gold hss drill bit 135 deg [Set of 12] #ad - Dimensions overall product weight -0. 01 pounds. -High speed steel features a black shank and gold flute. -Laser-etched markings for easy identification. 585-3019008b features -accurate drilling without center punch. -Split point begins drilling immediately, minimizing bit ”walk”. Number of bits -1.

 

Vermont American 10230 High Speed Steel Fractional Drill Bits with Standard Shank #ad

Vermont American 10230 High Speed Steel Fractional Drill Bits with Standard Shank

Vermont American 10230 High Speed Steel Fractional Drill Bits with Standard Shank #ad - Vermont american 10230 high speed steel fractional drill bits with standard shank vermont american 10230 high speed steel fractional drill bits with standard shank features high speed steel drill bits are ideal for general purpose drilling in wood, metal and plastic. Bits feature a 118-degree point for fast, easy starts diameter 15/32″ flute length 4-5/16″ overall length 5-3/4″ quantity 1 per card. Each bit is hardened and tempered for long life and high performance in tough applications.

 

Vermont American 13458 18-Inch High Speed Steel Left-hand Fractional Drill Bit #ad

Vermont American 13458 1/8-Inch High Speed Steel Left-hand Fractional Drill Bit

Vermont American 13458 1/8-Inch High Speed Steel Left-hand Fractional Drill Bit #ad - Designed for use in reversible drills, lathes and milling machines. Ideal for general purpose drilling. All bits feature a 118-degree standard point configuration.

 

Irwin Tools 67528 Heavy Duty HSS Drill Bits - 716 Black Oxide Fractional Drill Bit #ad

Irwin Tools 67528 Heavy Duty HSS Drill Bits – 7/16″ Black Oxide Fractional Drill Bit

Irwin Tools 67528 Heavy Duty HSS Drill Bits – 7/16″ Black Oxide Fractional Drill Bit #ad - The product is manufactured in china. Used for power tool accessories, drill bits & accessories. The item is heavy duty hss drill bits, 7/16″ black oxide fractional drill bit.

 

Viking Type 240 general purpose Black Oxide surface finish jobber length 118º point fractional drill bits #ad

Viking Type 240 general purpose, Black Oxide surface finish, jobber length 118º point fractional drill bits

Viking Type 240 general purpose, Black Oxide surface finish, jobber length 118º point fractional drill bits #ad - Black oxide finish increases wear resistance and adds lubricity to improve chip flow. Widely used in general purpose applications. Designed for a wide range of operating conditions and materials. Made in the usa. Fractional.

 

Walter 01H008 SST 135 Deg Stub Fractional Drill Bit pack of 10 - 18 in Jobbers Bit with 1116 in Cutting Length Twist Drill Bit for Steel Stainless Steel Non Ferrous Alloys Power Drilling Accessories #ad

Walter 01H008 SST+ 135 Deg. Stub, Fractional Drill Bit [pack of 10] – 1/8 in. Jobbers Bit with 11/16 in. Cutting Length, Twist Drill Bit for Steel, Stainless Steel, Non Ferrous Alloys. Power Drilling Accessories

Walter 01H008 SST+ 135 Deg. Stub, Fractional Drill Bit [pack of 10] – 1/8 in. Jobbers Bit with 11/16 in. Cutting Length, Twist Drill Bit for Steel, Stainless Steel, Non Ferrous Alloys. Power Drilling Accessories #ad - Durable construction sst+ fractional bit is made using a cobalt blend for superior performance on hard materials and for enhanced longevity the short flute design provides maximum rigidity when drilling in sheet metals. Innovative design power drilling bit is designed to have a short length, which provides maximum resistance to breakage and allows for drilling in confined areas and round surfaces the high-power fractional bit can drill more holes in lesser time. Applications the fractional bit is widely used with stationary machines for drilling into sheet metal, and thin-walled materials you can also use this drilling bit on steel, stainless steel, and other non-ferrous alloys. Specifications the metal drilling bit has a flute size of 11/16 in and drill size of 1/8 in the overall length of this twist drill bit is 1-15/16 in smaller diameter bits can be operated at high speeds and large ones are recommended to be used at low speed. Self-centering drill bit sst+ drill bit features a split point of 135 deg for fast and effective drilling without center punching the special self-centering point ensures minimal burrs.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.