Coolest 25 Carbide Tipped Bits

 

Makita SDS4 Plus – Carbide Tipped Bits 8 x 200 mm. – Aggressive Drilling For Concrete & Masonry - Features a flute kvs-spiral the vacuuming out quickly, thus saving time and use it wisely. The design features a reinforced shank of the kvs-flute reduces vibration and shocks transmitted from drill to drill the well bore, making it faster and last longer as well as labor users or machines as well. Drill head hammering a chisel the penetration into the material quickly while keeping dust ejected as well, with a flute of drill bits are specially designed. From the meticulous design of carbide tipped drill was designed to be precise honest accelerate the penetration and extend lifespan. Sds4 plus rotary hammer drill bits 4 features that are specifically designed.

 

Magnate 800 Core Box 2 Flute Carbide Tipped Router Bit – 1/8″ Cutting Diameter; 1/4″ Shank Diameter - It is also equipped with wide open gullets for easy disposal of wood chips. Excessive overall length may cause tool damage. It is suited for softwoods, hardwoods, chipboard, plywood and etc. You may try the following suggestion. For use in decorative fluting and sign making. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Up shear cutting angle clears chips out fast for accurate and chatter free performance. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Can be used with the legacy ornamental millÔ to cut indexed flutes and coves on spindle stock or parallel flutes on flat stock. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. In case a bit doesn’t come with a speed chart. 817 is designed for nevada style gaming table chip trays.

 

Magnate 9336 Multi-Spur Carbide Tipped Bit – 2-1/8″ Cutting Diameter; 1/2″ Shank Diameter - Cleaning bottom bit for industrial purpose is characterized with high hardness and long life, and resulting in nice finishing on woody pieces after cutting. 2-1/8″ cutting diameter 1/2″ shank diameter 6″ overall length. Use on cnc and other automatic routers as well as hand held and table mounted portable routers. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. This carbide-tipped bit use a two-flute bit where fine finish is paramount and two flutes coulld balance the bit, eliminating vibration that degrades the cut finish.

 

Magnate 1724 Bull Nose (Half Round) Carbide Tipped Router Bit – 5/8″ Bead Diameter - Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. In case a bit doesn’t come with a speed chart. For bead cutting and edge rounding on picture frames, stair threads, window sills, etc. It is suited for softwoods, hardwoods, chipboard, plywood and etc. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Excessive overall length may cause tool damage. You may try the following suggestion. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. It is also equipped with wide open gullets for easy disposal of wood chips.

 

MLCS 6077 Woodworking 1/4-Inch shank Carbide-tipped Router Bit Set, 15-Piece - Sturdy wood storage box also included. High quality carbide-tipped set includes 4 straight bits (3/16″, 1/4″, 1/2″, 3/4″), 1 round over bit (3/8″), 1 cove bit (1/2″), 1 roman ogee bit (5/32″), 1 45 deg chamfer bit, 1 flush trim bit (1/2″), 1 rabbeting bit (3/8″), 1 dovetail bit (1/2″ x 14 degree), 1 v-groove bit (3/8″), 1 hinge mortising bit (1/2″), 1 panel pilot bit (1/4″), 1 round nose bit (1/4″), 1 allen wrench and 1 bearing to convert round over bit into beading bit. .

 

Makita SDS4 Plus – Carbide Tipped Bits 28 x 450 mm. – Aggressive Drilling For Concrete & Masonry - The design features a reinforced shank of the kvs-flute reduces vibration and shocks transmitted from drill to drill the well bore, making it faster and last longer as well as labor users or machines as well. Sds4 plus rotary hammer drill bits 4 features that are specifically designed. Features a flute kvs-spiral the vacuuming out quickly, thus saving time and use it wisely. Drill head hammering a chisel the penetration into the material quickly while keeping dust ejected as well, with a flute of drill bits are specially designed. From the meticulous design of carbide tipped drill was designed to be precise honest accelerate the penetration and extend lifespan.

 

Makita SDS4 Plus – Carbide Tipped Bits 6.5 x 160 mm. – Aggressive Drilling For Concrete & Masonry - The design features a reinforced shank of the kvs-flute reduces vibration and shocks transmitted from drill to drill the well bore, making it faster and last longer as well as labor users or machines as well. Features a flute kvs-spiral the vacuuming out quickly, thus saving time and use it wisely. Drill head hammering a chisel the penetration into the material quickly while keeping dust ejected as well, with a flute of drill bits are specially designed. From the meticulous design of carbide tipped drill was designed to be precise honest accelerate the penetration and extend lifespan. Sds4 plus rotary hammer drill bits 4 features that are specifically designed.

 

Magnate 5808 Edge Beading Carbide Tipped Router Bit – 1/8″ Bead Diameter; 1/4″ Shank Diameter - You may try the following suggestion. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Excessive overall length may cause tool damage. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is also equipped with wide open gullets for easy disposal of wood chips. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. In case a bit doesn’t come with a speed chart.

 

Magnate 6072 Double-Beading Router Carbide Tipped Bit – 1/8″ Radius; 13/16″ Cutting Length - Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. You may try the following suggestion. Excessive overall length may cause tool damage. In case a bit doesn’t come with a speed chart. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications.

 

Magnate 427 Dovetail 2 Flute Carbide Tipped Router Bit – 7 Degree; 17/32″ Cutting Diameter - 14 degree dovetail may be used in conjunction with 14 degree butterfly spline bits to make butterfly spline glue joint. It is also equipped with wide open gullets for easy disposal of wood chips. This bit is designed for making drawer fingers and for french dovetailing. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Excessive overall length may cause tool damage. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. You may try the following suggestion. In case a bit doesn’t come with a speed chart. It is suited for softwoods, hardwoods, chipboard, plywood and etc. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It can also be used with legacy ornamental mill machines to create unique indexed dovetail slots at 90 degree or 120 degree spacing for furniture legs and three legged pedestals.

 

Magnate 1525 Extra Deep Core Box Carbide Tipped Router Bit – 5/16″ Cutting Diameter - This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Excessive overall length may cause tool damage. In case a bit doesn’t come with a speed chart. You may try the following suggestion. It is precision ground, hardened, and tempered in order to stand up to a variety of materials.

 

Magnate 416 Dovetail 2 Flute Carbide Tipped Router Bit – 18 Degree; 1/2″ Cutting Diameter - This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Excessive overall length may cause tool damage. It is also equipped with wide open gullets for easy disposal of wood chips. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It can also be used with legacy ornamental mill machines to create unique indexed dovetail slots at 90 degree or 120 degree spacing for furniture legs and three legged pedestals. This bit is designed for making drawer fingers and for french dovetailing. 14 degree dovetail may be used in conjunction with 14 degree butterfly spline bits to make butterfly spline glue joint. In case a bit doesn’t come with a speed chart. You may try the following suggestion. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. It is suited for softwoods, hardwoods, chipboard, plywood and etc.

 

MLCS 8377 15-Piece Router Bit Set with Carbide-Tipped 1/2-Inch Shanks - 1/2-inch shanks. Economical, all-purpose starter set. 15 different bits in set. Quality, carbide-tipped bits. Wood storage box included.

 

Makita SDS4 Plus – Carbide Tipped Bits 25 x 260 mm. – Aggressive Drilling For Concrete & Masonry - Drill head hammering a chisel the penetration into the material quickly while keeping dust ejected as well, with a flute of drill bits are specially designed. From the meticulous design of carbide tipped drill was designed to be precise honest accelerate the penetration and extend lifespan. The design features a reinforced shank of the kvs-flute reduces vibration and shocks transmitted from drill to drill the well bore, making it faster and last longer as well as labor users or machines as well. Sds4 plus rotary hammer drill bits 4 features that are specifically designed. Features a flute kvs-spiral the vacuuming out quickly, thus saving time and use it wisely.

 

Magnate 6071 Double-Beading Router Carbide Tipped Bit – 1/8″ Radius; 13/16″ Cutting Length - It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. Excessive overall length may cause tool damage. In case a bit doesn’t come with a speed chart. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. You may try the following suggestion. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is suited for softwoods, hardwoods, chipboard, plywood and etc. It is also equipped with wide open gullets for easy disposal of wood chips.

 

1.5-in CARBIDE TIPPED BIT, SDS Max!!! (1.5″ X 16″ X 22″) - With a cross tip w flute and four cutting edges, you will drill more holes faster compatible with all sds max rotary hammers. Warning drill shank is sds max and your rotary hammer must be sds max compatible or this will not fit. Sds max is not interchangeable with sds, or sds plus the 1. 5″ carbide tipped bit, is the perfect tool for masonry applications.

 

Magnate S5806 Edge Beading Carbide Tipped Router Bit – 5/8″ Bead Diameter; 1/2″ Shank Diameter - This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. In case a bit doesn’t come with a speed chart. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is also equipped with wide open gullets for easy disposal of wood chips. Excessive overall length may cause tool damage. It is suited for softwoods, hardwoods, chipboard, plywood and etc. You may try the following suggestion.

 

MLCS 8383 66 Piece Carbide-Tipped Router Bit Set, 1/2-Inch Shank - Assortment set makes a great gift for any woodworker on your list. Quality, carbide-tipped bits. Includes storage box. Incredible value. Storage box is wall-mountable.

 

Makita SDS4 Plus – Carbide Tipped Bits 6 x 160 mm. – Aggressive Drilling For Concrete & Masonry - The design features a reinforced shank of the kvs-flute reduces vibration and shocks transmitted from drill to drill the well bore, making it faster and last longer as well as labor users or machines as well. Sds4 plus rotary hammer drill bits 4 features that are specifically designed. Drill head hammering a chisel the penetration into the material quickly while keeping dust ejected as well, with a flute of drill bits are specially designed. From the meticulous design of carbide tipped drill was designed to be precise honest accelerate the penetration and extend lifespan. Features a flute kvs-spiral the vacuuming out quickly, thus saving time and use it wisely.

 

Magnate 0908 Chamfer 2 Flute Carbide Tipped Router Bit – 45 Degree; 1-3/16″ Cutting Height - Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Excessive overall length may cause tool damage. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. In case a bit doesn’t come with a speed chart. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. You may try the following suggestion. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is also equipped with wide open gullets for easy disposal of wood chips. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is suited for softwoods, hardwoods, chipboard, plywood and etc.

 

Magnate 7551 Barley Twist Carbide Tipped Router Bit – 1″ Cutting Diameter; 2″ Shank Length - Can also be used for general grooving or flat moldings. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. This bit is designed to work with legacy ornamental machine to create traditional style barley twist. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. When combined with a upcut spiral bit they also form a beautiful hollow spiral. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. In case a bit doesn’t come with a speed chart. Excessive overall length may cause tool damage. You may try the following suggestion. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications.

 

Magnate 1513 Extra Deep Core Box Carbide Tipped Router Bit – 1-1/4″ Cutting Diameter - Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. Excessive overall length may cause tool damage. It is also equipped with wide open gullets for easy disposal of wood chips. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is suited for softwoods, hardwoods, chipboard, plywood and etc. You may try the following suggestion. In case a bit doesn’t come with a speed chart. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is precision ground, hardened, and tempered in order to stand up to a variety of materials.

 

MLCS 8369 1/2-Inch shank Carbide-tipped Router Bit Set, 30-Piece - Wood storage box included. 33 per bit. Just $3. High quality router bit set at an incredible price. Includes bits 3 cove (1/4″, 3/8″, 1/2″), 2 flush trim (3/8″, 1/2″), 3 dovetail (14 deg-1/2″, 5/8″ & 9 deg-3/8″), 45 degree chamfer, 2 roman ogee (5/32″, 1/4″), 6 round over (1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 1/2″), 5 straight (1/4″, 5/16″, 3/8″, 1/2″, 3/4″), 1 rabbeting (3/8″), 3 round nose (1/4″, 3/8″, 1/2″),1 bevel (25 deg), 1 slot cutter (1/4″), 1 v-groove (1/2″), 1 panel pilot (3/8″), 1 allen wrench and 1 bearing to convert round over bit into beading bit. 1/2″ shank.

 

Makita SDS4 Plus – Carbide Tipped Bits 6.5 x 110 mm. – Aggressive Drilling For Concrete & Masonry - From the meticulous design of carbide tipped drill was designed to be precise honest accelerate the penetration and extend lifespan. The design features a reinforced shank of the kvs-flute reduces vibration and shocks transmitted from drill to drill the well bore, making it faster and last longer as well as labor users or machines as well. Sds4 plus rotary hammer drill bits 4 features that are specifically designed. Features a flute kvs-spiral the vacuuming out quickly, thus saving time and use it wisely. Drill head hammering a chisel the penetration into the material quickly while keeping dust ejected as well, with a flute of drill bits are specially designed.

 

Makita® 5 Piece – SDS-Plus Bit Set For Rotary Hammers – Aggressive Drilling For Concrete & Masonry – Carbide Tipped Bits - Common diameters included 1 bit of 3/16″ + 1 bit of 1/4″ + 1 bit of 5/16″ + 1 bit of 3/8″ + 1 bit of 1/2″. Makita’s top quality carbide tips ensure drilling performance and longevity of bit life even in the most demanding of applications of concrete, brick, masonry, and reinforced concrete the makita sds-plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling. Engineered in anjo aichi, japan for makita sds-plus rotary hammers and also fully compatible with all (bosch, dewalt, milwaukee, hilti, etc) sds-plus rotary hammers. Ideal for general contractors, diy, or homeowners who need a wide variety of concrete drill bit sizes, all conveniently placed in their own sturdy plastic carrying case for easy access and storage. Makita’s sds-plus drilling bit set for rotary hammers with case offers convenience and peace of mind, equipped with the most commonly used sizes for drilling, screwing, anchoring and fastening into all types of concrete and masonry.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.