Coolest 17 Crosscut Saws

 

Lynx 3 One Man Crosscut Saw

Lynx 3′ One Man Crosscut Saw

Lynx 3′ One Man Crosscut Saw - Can be re-sharpened using a large triangular file. Beech handle, plus auxiliary handle for use as a two-man version if required. Special great american tooth pattern for use on logs, etc. Each tooth is hand set. British cs80 steel, 15mm thick blade.

 

Freud LU73M010 10-Inch 60 Tooth ATB Cabinetmakers Crosscutting Saw Blade with 58-Inch Arbor

Freud LU73M010 10-Inch 60 Tooth ATB Cabinetmaker’s Crosscutting Saw Blade with 5/8-Inch Arbor

Freud LU73M010 10-Inch 60 Tooth ATB Cabinetmaker’s Crosscutting Saw Blade with 5/8-Inch Arbor - Covered by freud’s limited lifetime warranty. Kickback reducing design. Laser cut blade bodies and expansion slots. Tri-metal brazing.

 

14 Beaver Tooth Western Style Crosscut Saw replacement Handles Pair

14″ Beaver Tooth Western Style Crosscut Saw replacement Handles Pair

14″ Beaver Tooth Western Style Crosscut Saw replacement Handles Pair - Made in tenn. Beaver tooth western style crosscut saw handles will replace most brands that used a 1-1/4″ diameter handle. These are domed on the top for a great feel and look. . Fit on disston, atkins, simmons, and others.

 

DEWALT DW3524 7-14 Crosscut Saw Blade

DEWALT DW3524 7-1/4 Crosscut Saw Blade

DEWALT DW3524 7-1/4 Crosscut Saw Blade - Blade coating prevents rust and reduces friction. Fully hardened steel body prevents blade warping and binding. Precision sharpened teeth for fast, smooth cuts and longer life. Thicker body provides increased durability in heavy-duty applications.

 

47 Two Man Crosscut Saw Made in Germany

47″ Two Man Crosscut Saw, Made in Germany

47″ Two Man Crosscut Saw, Made in Germany - The blade is 4-3/4″ wide at the widest part in the middle tapering to about 3″ at either side. Historically, the peg tooth pattern dominated before more specialized patterns were developed. It will cut both green and seasoned wood. The blade is 47″ long with 2 teeth per inch that cut on the push as well as on the pull stroke. This two-man log saw is ideal for cutting medium to large size logs and timbers. It is often preferred by sawyers who want a versatile saw that is easily maintained. It has no dedicated raker teeth and as such is the easiest pattern to sharpen and maintain. Made in germany. The peg tooth design features a uniform pattern of cutting teeth. Comes with a pair of wooden handles that fits into steel sockets (friction fit) at both ends. Overall length is about 52″.

 

Lynx 6 Two Man Crosscut Saw

Lynx 6′ Two Man Crosscut Saw

Lynx 6′ Two Man Crosscut Saw - These large saws have been used mostly in forestry work and for crosscutting large logs, but in recent years they have become popular with people aiming to cut their own firewood in a more traditional fashion. Each saw is made from british cs80 steel with a rockwell hardness of 44-46 and a thickness of 1. 5mm to provide a superior stiffness when cutting on long strokes. This blade’s tooth pattern is a peg tooth formation at 1 tpi, hand set, and cut with the pull/push stroke in each direction. The two handles are solid beech, and the teeth can be re-sharpened with a large triangular file.

 

Amana Tool 610600 Cut-Off and Crosscut 10-Inch x 60 Tooth ATB 58-Inch  Bore Saw Blade

Amana Tool 610600 Cut-Off and Crosscut 10-Inch x 60 Tooth ATB 5/8-Inch Bore Saw Blade

Amana Tool 610600 Cut-Off and Crosscut 10-Inch x 60 Tooth ATB 5/8-Inch Bore Saw Blade - Great for crosscutting hardwood, softwood, plywood and chipboard. Massive tool steel plate, with laser cut expansion slots allowing the blade to expand and contract from heat preventing warpage extra large carbide teeth provide more resharpenings. Copper plugs to reduce noise and vibration during operation. 10 inch x 60 teeth alternate top bevel grind 10 degree hook. Tension rings which maintains the blades straightness under stress of operation.

 

Gyokucho Katah Yokobiki 9-12 Crosscut Saw from Japan Woodworker

Gyokucho Katah Yokobiki 9-1/2″ Crosscut Saw from Japan Woodworker

Gyokucho Katah Yokobiki 9-1/2″ Crosscut Saw from Japan Woodworker - 024″. 024 thick for added stiffness. Blade length 9-1/2″overall length 20″cross-cut 16 tpiblade thickness 0. This gyokucho katah yokobiki razor saw is well suited for deep cuts and general purpose use in stock 2 and less. The blade is 0. The teeth are impulse hardened for extended wear. Spare blades are available.

 

Amana Tool AGE Series MD10-504TB Thin Kerf Combination RipCrosscut 10-Inch x 50 Tooth  4 ATB  1 Raker 58 Bore Saw Blade

Amana Tool A.G.E. Series MD10-504TB Thin Kerf Combination Rip/Crosscut 10-Inch x 50 Tooth 4 ATB + 1 Raker 5/8 Bore Saw Blade

Amana Tool A.G.E. Series MD10-504TB Thin Kerf Combination Rip/Crosscut 10-Inch x 50 Tooth 4 ATB + 1 Raker 5/8 Bore Saw Blade - Thin kerf reduce waste in material and require less horsepower. 10 inch x 50 teeth 4 alternate top bevel followed by 1 raker grind, 15 degree hook. Laser cut expansion slots allowing the blade to expand and contract from heat preventing warpage. Use one blade to crosscut and rip in soft/hardwoods, plywood and chipboard. Industrial quality made in germany.

 

Amana Tool AGE Series MD10-616TB Thin Kerf Cut-Off and Crosscut 10-Inch x 60 Tooth ATB 58 Bore Saw Blade

Amana Tool A.G.E. Series MD10-616TB Thin Kerf Cut-Off and Crosscut 10-Inch x 60 Tooth ATB 5/8 Bore Saw Blade

Amana Tool A.G.E. Series MD10-616TB Thin Kerf Cut-Off and Crosscut 10-Inch x 60 Tooth ATB 5/8 Bore Saw Blade - Thin kerf reduce waste in material and require less horsepower. Laser cut expansion slots allowing the blade to expand and contract from heat preventing warpage. Corsscuts both soft/hardwoods and plywood. Industrial quality made in germany. 10-inch x 60 teeth alternate top bevel grind, 15 degree hook, 5/8 bore.

 

Al Munhanna 10x 80t Heavy Duty Tungsten Carbide Tipped Cut-off Crosscut Saw Blades ATB 58-inch Arbor

Al Munhanna 10″x 80t Heavy Duty Tungsten Carbide Tipped Cut-off & Crosscut Saw Blades ATB 5/8-inch Arbor

Al Munhanna 10″x 80t Heavy Duty Tungsten Carbide Tipped Cut-off & Crosscut Saw Blades ATB 5/8-inch Arbor - Extra sharp oversized carbide teeth are re-sharp enable for long life. High quality cutting across the grain of natural massive wood. For use on miter saws, circular saws, table saws, hand saws rpm up to 7600. Carbide tipped 10″ diameter 80teeth 5/8″ bore atb grind 126″ kerf 087″ plate. You can use them on plywood or hardwoods, plastics deliver smooth cuts.

 

Lynx 4 Two Man Crosscut Saw

Lynx 4′ Two Man Crosscut Saw

Lynx 4′ Two Man Crosscut Saw - This large saw is used mostly in forestry work and the crosscutting of large logs, but in recent years it has been purchased by people aiming to cut their own firewood in a more traditional fashion. 5mm to provide the superior stiffness needed to cut long strokes. The two handles are solid beech, and the teeth can be re-sharpened with a large triangular file. The blade’s tooth pattern is a peg tooth formation at 1 tpi, hand set, and cut with the pull/push stroke in each direction. It is made from british cs80 steel with a rockwell hardness of 44-46 and a thickness of 1.

 

Bosch CB1060L 10-Inch 60 Tooth FTG Crosscutting Saw Blade with 58-Inch Arbor

Bosch CB1060L 10-Inch 60 Tooth FTG Crosscutting Saw Blade with 5/8-Inch Arbor

Bosch CB1060L 10-Inch 60 Tooth FTG Crosscutting Saw Blade with 5/8-Inch Arbor - A fully hardened thin kerf plate means less material is removed which allows for a faster cut while still remaining straight and true. Expansion slots reduce blade warping. Impact resistant tri-metal shims between each carbide tip and the blade act as shock absorbers in tough applications. Patented c-3 dyanite® carbide teeth are diamond ground to be precision sharp from the start and stay sharp up to 6x longer than standard carbide.

 

Lynx 5 Two Man Crosscut Saw

Lynx 5′ Two Man Crosscut Saw

Lynx 5′ Two Man Crosscut Saw - The two handles are solid beech, and the teeth can be re-sharpened with a large triangular file. 5mm to provide a superior stiffness when cutting on long strokes. Each saw is made from british cs80 steel with a rockwell hardness of 44-46 and a thickness of 1. These large saws have been used mostly in forestry work and for crosscutting large logs, but in recent years they have become popular with people aiming to cut their own firewood in a more traditional fashion. This blade’s tooth pattern is a peg tooth formation at 1 tpi, hand set, and cut with the pull/push stroke in each direction.

 

36 One Man Crosscut Saw Tuttle Teeth Made in Germany

36″ One Man Crosscut Saw, Tuttle Teeth, Made in Germany

36″ One Man Crosscut Saw, Tuttle Teeth, Made in Germany - Each tooth is hand set and sharpened. Tuttle teeth pattern for use on logs and large timbers. 18 gauge special formula german saw steel. Teeth can be re-sharpened using a file. Beech handle, plus auxiliary handle for use as a two-man version if required.

 

Black Decker Crosscut Saw Blade

Black & Decker Crosscut Saw Blade

Black & Decker Crosscut Saw Blade - Reinforced tooth design puts more steel behind each tooth for greater precision and longer blade life. Superior precision/superior finish/superior life. The scorpion blades are made of the highest quality materials. Black & decker x29961 scorpion saw wood plastic. Ideal for general purpose usage.

 

Rob Cosmans Professional Crosscut Joinery Saw Black Resin

Rob Cosman’s Professional Crosscut Joinery Saw Black Resin

Rob Cosman’s Professional Crosscut Joinery Saw Black Resin - Each saw personally tested by rob cosman. Extra heavy brass back provides perfect balance and all the downward pressure needed to make fast an. The saw comes cradled in a beautifully hand crafted walnut and ash presentation/storage case. With only 002 set per side this 15 tpi saw will slice through wood, leaving a ready-to-join surface. Composite handles with carved finger recesses for extra comfort and control.