Best Spline Drill Bit out of top 19

 

78 x 16 Joran SDS Masonry Spline Shank Carbide Drill Bit Denmark ANSI

7/8″ x 16″ Joran SDS Masonry Spline Shank Carbide Drill Bit, Denmark ANSI

7/8″ x 16″ Joran SDS Masonry Spline Shank Carbide Drill Bit, Denmark ANSI - Joran sds masonry 7/8″ x 16″ spline shank carbide drill bit denmark ansiansi, american national standard institute.

 

34 X 12 Spline Masonry Drill Bit

3/4″ X 12″ Spline Masonry Drill Bit

3/4″ X 12″ Spline Masonry Drill Bit - Diameter 3/4″overall length 12″drillable length 6″shank splinecarbide tipped 2-cutter head designfor use in concrete and hard masonry materialscentering point for improved positioning and starting.

 

38 X 12 Spline Masonry Drill Bit

3/8″ X 12″ Spline Masonry Drill Bit

3/8″ X 12″ Spline Masonry Drill Bit - Diameter 3/8″overall length 12″drillable length 6″shank splinecarbide tipped 2-cutter head designfor use in concrete and hard masonry materialscentering point for improved positioning and starting.

 

78 X 18 Spline Masonry Drill Bit

7/8″ X 18″ Spline Masonry Drill Bit

7/8″ X 18″ Spline Masonry Drill Bit - Diameter 7/8″overall length 18″drillable length 12″shank splinecarbide tipped 2-cutter head designfor use in concrete and hard masonry materialscentering point for improved positioning and starting.

 

Joran 1-14 x 16 Masonry Spline Shank Carbide Drill Bit_Made In Denmark

Joran 1-1/4″ x 16″ Masonry Spline Shank Carbide Drill Bit_Made In Denmark

Joran 1-1/4″ x 16″ Masonry Spline Shank Carbide Drill Bit_Made In Denmark - Joran 1-1/4″ x 16″ masonry spline shank carbide drill bitmasonry drill bit roto/percussionmade in denmarkdiamond groundblack oxideground flute.

 

12 X 18 Spline Masonry Drill Bit

1/2″ X 18″ Spline Masonry Drill Bit

1/2″ X 18″ Spline Masonry Drill Bit - Diameter 1/2″overall length 18″drillable length 12″shank splinecarbide tipped 2-cutter head designfor use in concrete and hard masonry materialscentering point for improved positioning and starting.

 

1-12 X 18 Spline Masonry Drill Bit

1-1/2″ X 18″ Spline Masonry Drill Bit

1-1/2″ X 18″ Spline Masonry Drill Bit - Cm97 sds spline shank hammer bit has a self-starting carbide single tip for swift penetration. The balance of tip and flute geometry ensures perfectly round holes. There is a reinforced flute geometry which reduces vibration, transfers more impact energy to the cutting face, and quickly channels debris. 1-1/2″ x 18″ spline masonry drill bit. Short, conical dust entrance provides extra fast material removal, and patented flute optimizes impact energy transfer, break resistant and fast debris removal.

 

78 X 12 Spline Masonry Drill Bit

7/8″ X 12″ Spline Masonry Drill Bit

7/8″ X 12″ Spline Masonry Drill Bit - Diameter 7/8″overall length 12″drillable length 6″shank splinecarbide tipped 2-cutter head designfor use in concrete and hard masonry materialscentering point for improved positioning and starting.

 

916 X 12 Spline Masonry Drill Bit

9/16″ X 12″ Spline Masonry Drill Bit

9/16″ X 12″ Spline Masonry Drill Bit - Diameter 9/16″overall length 12″drillable length 6″shank splinecarbide tipped 2-cutter head designfor use in concrete and hard masonry materialscentering point for improved positioning and starting.

 

12 X 12 Spline Masonry Drill Bit

1/2″ X 12″ Spline Masonry Drill Bit

1/2″ X 12″ Spline Masonry Drill Bit - Diameter 1/2″overall length 12″drillable length 6″shank splinecarbide tipped 2-cutter head designfor use in concrete and hard masonry materialscentering point for improved positioning and starting.

 

58 X 18 Spline Masonry Drill Bit

5/8″ X 18″ Spline Masonry Drill Bit

5/8″ X 18″ Spline Masonry Drill Bit - Diameter 5/8″overall length 18″drillable length 12″shank splinecarbide tipped 2-cutter head designfor use in concrete and hard masonry materialscentering point for improved positioning and starting.

 

Bosch 34-in x 13-in Spline Drill Bit

Bosch 3/4-in x 13-in Spline Drill Bit

Bosch 3/4-in x 13-in Spline Drill Bit - Active centering tip for optimum guidance when drilling in concrete and reinforced concrete. Inclined side cutters for aggressive drilling. Short head gets dust out fast and reduces heat build-up. Accurate hole diameter ensured by placing wear mark at the tip. Extremely robust and aggressive solid tungsten-carbide s-cutters.

 

1 X 12 Spline Masonry Drill Bit

1″ X 12″ Spline Masonry Drill Bit

1″ X 12″ Spline Masonry Drill Bit - Diameter 1″overall length 12″drillable length 6″shank splinecarbide tipped 2-cutter head designfor use in concrete and hard masonry materialscentering point for improved positioning and starting.

 

1-18 X 23 Spline Masonry Drill Bit

1-1/8″ X 23″ Spline Masonry Drill Bit

1-1/8″ X 23″ Spline Masonry Drill Bit - 1-1/4″ x 18″ spline masonry drill bit. 1-3/8″ x 18″ spline masonry drill bit. Short, conical dust entrance provides extra fast material removal, and patented flute optimizes impact energy transfer, break resistant and fast debris removal. The balance of tip and flute geometry ensures perfectly round holes. 1-1/8″ x 23″ spline masonry drill bit.

 

Irwin Industrial 1X11X16 Spline Drill Bit 2Cut 324029

Irwin Industrial 1X11X16 Spline Drill Bit 2Cut 324029

Irwin Industrial 1X11X16 Spline Drill Bit 2Cut 324029 - Flute geometry removes dust from the hole quicker for fast drilling and long life. Size, 1 x 11 x 16 in. Spline shank. Features. Shot peened double-tempered finish reduces breakage. Fits all spline rotary hammers. Chrome vanadium shaft through-hardened to 50-53hrc. 2 count. Copper braze material gives high heat resistance for reduced tip loss. Standard tip.

 

Irwin Industrial 34X8X13 Spline Drill Bit 2Cut 324018

Irwin Industrial 3/4X8X13 Spline Drill Bit 2Cut 324018

Irwin Industrial 3/4X8X13 Spline Drill Bit 2Cut 324018 - Copper braze material gives high heat resistance for reduced tip loss. Shot peened double-tempered finish reduces breakage. Chrome vanadium shaft through-hardened to 50-53hrc. Flute geometry removes dust from the hole quicker for fast drilling and long life. Features. Fits all spline rotary hammers. 2 count. Spline shank. Size, 34 x 8 x 13 in. Standard tip.

 

1-14 X 18 Spline Masonry Drill Bit

1-1/4″ X 18″ Spline Masonry Drill Bit

1-1/4″ X 18″ Spline Masonry Drill Bit - Short, conical dust entrance provides extra fast material removal, and patented flute optimizes impact energy transfer, break resistant and fast debris removal. 1-3/8″ x 23″ spline masonry drill bit. The balance of tip and flute geometry ensures perfectly round holes. 1-3/8″ x 18″ spline masonry drill bit. 1-1/4″ x 18″ spline masonry drill bit.

 

58 X 23 Spline Masonry Drill Bit

5/8″ X 23″ Spline Masonry Drill Bit

5/8″ X 23″ Spline Masonry Drill Bit - Diameter 5/8″overall length 23″drillable length 18″shank splinecarbide tipped 2-cutter head designfor use in concrete and hard masonry materialscentering point for improved positioning and starting.

 

1-38 X 23 Spline Masonry Drill Bit

1-3/8″ X 23″ Spline Masonry Drill Bit

1-3/8″ X 23″ Spline Masonry Drill Bit - Short, conical dust entrance provides extra fast material removal, and patented flute optimizes impact energy transfer, break resistant and fast debris removal. There is a reinforced flute geometry which reduces vibration, transfers more impact energy to the cutting face, and quickly channels debris. The balance of tip and flute geometry ensures perfectly round holes. 1-3/8″ x 23″ spline masonry drill bit. 1-1/2″ x 18″ spline masonry drill bit.