G.S T-C WIRE PIN AND ROD CUTTER 18″
- Gs t-c wire pin and rod cutter 18″. Gs instruments are just sold by gs online store. Made in high stainless steel. Same as picture.
MCC Replacement Dies for MCC’s 3/8 Threaded ROD Cutter 2x Lifetime By Double Sided Die Design
- Do not use on other products. Also good for mcc’s model ab43u(the 3/8” part) and rab-3u. Easy to replace dies. Mcc replacement dies for mcc 3/8 threaded rod cutter 2x lifetime by double sided die design. Replacement dies can be used on the mcc rod cutter.
MCC 3/8 RATCHET Threaded ROD Cutter for easy overhead cutting 2x Lifetime By Double Sided Die Design
- Jaw has two lifetimes double sided die design easy to replace dies(sold on amazon). Designed to cut mild steel threaded rod. Unique die design protects threaded rod from damage while cutting. Top quality long lasting tool replacement dies model numberabe-3u. No cleaning and deburring work necessary after cut just screw the nut on end-cut.
MCC Quality RC-0113 1/2″ and 3/8” Re-Bar/rod Cutter (not for threaded rod)Soft metric size #10, #13
- Note blades for rc-13 have two cutting notches for small and bigger diameter materials. Cutting capacity= bar size3/8”, 1/2” soft metric size #10, #13. Model no rc-0113 blade model no cbe-0213. Superior frame design with malleable cast iron base with steel pipe handles. Specially designed for cutting steel rods, deformed bars for reinforced concrete and rails.
Fuller Tool 315-0271 Pro 24-Inch Bolt Rod and Wire Cutter with 3/8-Inch Cut Capacity
- Strong tubular handles with slip-proof rubber grips. Heat-treated chrome molybdenum steel jaws. Adjusting screws allow for easy and perfect alignment of jaws. Professional quality. Cuts up to 3/8-inch.
Safeguard Europe Ltd Dryrod Damp Proofing Rod Cutter
- Magnesium strike rod. Glass breaker. Removable led. Dryrod damp proofing rod cutter. Belt cutter.
Replacement Die for Thread Rod Cutter Size: 3/8″
- -Capacity 1/4”, 5/16”, 1/2”. 22-trc38d size 3/8″ features -replacement die.
Berkley Tool BT-50375 3/8-Inch Threaded Rod Cutter
- Replaceable cutting jaws. No additional cleaning after cutting. Cuts 3/8-inch threaded rod clean. Berkley tool covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.
MCC 3/8 Threaded ROD Cutter 2x Lifetime By Double Sided Die Design
- Designed to cut mild steel threaded rod. No cleaning and deburring work necessary after cut just screw the nut on end-cut. Unique die design protects threaded rod from damage while cutting. Jaw has two lifetimes double sided die design easy to replace dies(sold on amazon). Top quality long lasting tool.
Replacement Die for Thread Rod Cutter Size: 1/2″
- -capacity 1/4”, 5/16”, 1/2”. 22-trc12d size 1/2″ features -replacement die.
Kovacek AMZ3EDC Spring Open Removable Led fire Rod Cutter glass Punch Belt Clip Half Serrated Blade
- The kovacek amz3 features a premium magnesium strike rod for emergency situations. The kovacek amz3 was designed to survive. The kovacek amz3 has a heavy-duty spring assist folding ultra-sharp edge and a convenient removable high performance led flashlight with replaceable batteries and uses the 3. 2″ half serrated blade bsd9 elite military grade steel. The ultimate survival tool, the kovacek amz3 is sure to impress and perform like no other with it quality materials, engineering and lifetime warrantee. The professional hardened tool steel glass breaker and seat belt/harness cutter can save your life. An outdoorsman’s favorite and a survivalist must have. It is ideal for hunting, survival, camping, and heavy-duty work.
Kaka Industrial MS-20 20mm Sheet Metal Shears, and Versatility, Rebar Bender, Rod Cutter, Steel Cutter, Flat Bar Steel, Round Steel Metal Cutter
- Can be used cutting multiple materials this sheet metal manual shear is capable of cutting materials such as rebar, rod steel, square or flat steel it gives great versatility when you choose to cut. Solid steel frame with hardened high carbon steel blade kaka industrial ms-20 manual hand shear has a very strong base steel frame, which will hold the stability during work also, this metal cutter is equipped with a high carbon steel blade, which can be served for long-time use. Easy operation with effortless cutting the metal shear can bolt to bench or table in a large extent, it makes the work more easier. Long handle allows more leverage this metal shear comes with a long handle separately the long handle will make the work more smooth and leave your back free when you are doing a cutting it would be a smart purchase. Great capacity throughout cutting this metal shear can cut 3/4-inch round steel, 11″x03″ flat steel as for square steel, it can cut 3/4″x3/4″ the cutting capacity will largely satisfy your work requirements.
29″ Thread Rod Cutter with Single Die
- -Cutting die set 1/4”-20, 3/8”-16. -Efficiently cuts 1/4”-20, 3/8”-16 soft steel thread rod with interchangeable dies. Construction -used primarily on construction sites where threaded rod is used to secure pipe, conduit sprinkler systems, duct work, lighting, ceiling and many other construction components. -capacity 1/4” or 3/8”. -Mounting holes for fast, easy permanent mounting to work surface. -The single die model comes with a 3/8” die. Dimensions -length 29”. -Cuts fast, clean, precisely and eliminates grinding or filing. 22-trc38 features -thread rod cutter with single die. -Forged alloy steel head with heat treated cutting dies.
Steel Dragon Tools TRC375 3/8″ Threaded Rod Cutter with 30″ Ergonomic Rubber Hand Grip Handle
- Jaws are made of heated treated alloy steel and replacement jaws are available. Cutting capacity/material 3/8″ low carbon steel threaded rodjaw capacity 3/8″handle length 30″cutting action center cutno additional cleaning after cuttingdie design protects threaded rod from damage while cuttingoffers precision cutting and eliminates thread-end grindingfor cutting low carbon steel threaded rodjaws are made of heat treated alloy steelergonomic rubber hand gripnet weight 9. Steel dragon tools® trc375 3/8″ threaded rod cutter with 30″ ergonomic rubber hand grip handlesdt-trc375 3/8″ threaded rod cutter offers precision cutting while eliminating thread-end grinding. No additional cleaning is needed after cutting as this cutter cuts through threaded rod with one clean stroke. 30″ handle provides leverage and ease when cutting low carbon steel threaded rod. 8lbs.
Kovacek AMZ3SER Spring Open Removable Led fire Rod Cutter glass Punch Belt Clip Half Serrated Blade
- The kovacek amz3 was designed to survive. The professional hardened tool steel glass breaker and seal belt/harness cutter can save your life. The ultimate survival tool, the kovacek amz3 is sure to impress and perform like no other with it quality materials, engineering and lifetime warrantee. The kovacek amz3 has a heavy-duty spring assist folding ultra-sharp edge and a convenient removable high performance led flashlight with replaceable batteries and uses the 3. An outdoorsman’s favorite and a survivalist must have. 2 inch half serrated blade bsd9 elite military grade steel. . The kovacek amz3 features a premium magnesium strike rod for emergency situations. It is ideal for hunting, survival, camping, and heavy-duty work.
MCC Quality RC-0116 1/2” and 5/8” Re-Bar/rod Cutter (not for threaded rod)Soft metric size #13, #16
- Cutting capacity= bar size 1/2” 5/8” soft metric size #13, #16. Specially designed for cutting steel rods, deformed bars for reinforced concrete and rails. Superior frame design with malleable cast iron base with steel pipe handles. Model no rc-0116 blade model no cbe-0216.
Supertool NK-M10 10 mm Threaded Rod Cutter by SUPER TOOL
- Threaded rod cutter 10mm capacitythe blades, jaws and body are made of alloy steel and completely heat treated in order to assure sharpness of the blades and long durabilityeasy to operate, the supertool threaded rod cutter gives a fast, precise clean cutsuitable in cutting threaded rods to hang pipes for air conditioners, electricity and water, light steel frames for ceiling or anemo ductsusing the threaded rod cutter eliminates grinding or filing, no burr removal is required.
Reed Tool TRCD5/16 Replacement Die for Threaded Rod Cutters, 5/16-Inch
- Reed manufacturing has been producing fine tools for worldwide professional trades since its founding, in 1896, by carl reed. Reed celebrates its 118th year of business in 2014. . From the company’s beginning, reed associates have invented tools that continually become industry standards, including the quick release tubing cutter, various tools for plastic pipe, vises, plus hinged cutters and rotary cutters for large diameter pipe.
Replacement Die for Thread Rod Cutter
- -Capacity 1/4”, 5/16”, 1/2”. 22-trc14d size 1/4″ features -replacement die. .
Reed Tool TRC1S Threaded Rod Cutter with 3/8-Inch Dies
- Head is made of forged alloy steel while cutting dies are heat-treated for strength. Threaded rod is commonly used on construction sites to secure pipe, conduit, duct work, and other construction elements. Threaded rod cutters give a fast, clean cut on soft steel threaded rod and eliminate the need for grinding or filing. The trc1s, with a single cutting space, ships with 3/8″ dies and can be outfitted with optional dies for 1/4″ and 5/16″ rod. There’s also a comfort handle grip on the upper handle. The trc1s holds one die set at a time, thus the reason for optional dies. Powder-coated, painted handle features a drilled hole on the lower handle for permanent mounting to a benchtop or other surface. .
Fuller Tool 315-0270 Pro 1/4-Inch Cut Capacity 14-Inch Bolt Rod and Wire Cutter
- Adjusting screws allow for easy and perfect alignment of jaws. Cuts up to 1/4″. Strong tubular handles with slip-proof rubber grips. Heat-treated chrome molybdenum steel jaws. Professional quality.
Thread Rod Cutter with Dual Dies Size: 29″
- 22-trc10 size 29″ features -thread rod cutter with dual dies. -Other size available 29”, 36”. -Cuts fast, clean, precisely and eliminates grinding or filing. -Mounting holes for fast, easy permanent mounting to work surface. -The double-die model comes with 3/8” and 1/4” 3/8” and 1/2” dies. -efficiently cuts 1/4”-20, 3/8”-16 soft steel thread rod with interchangeable dies. -Forged alloy steel head with heat treated cutting dies. -Used primarily on construction sites where threaded rod is used to secure pipe, conduit sprinkler systems, duct work, lighting, ceiling and many other construction components.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
